View Full Version : My New Noveske...
Sold the other ARs to fund this...
http://i50.tinypic.com/n2j2c9.jpg
http://i46.tinypic.com/9qzbl1.jpg
http://i45.tinypic.com/2q0py4p.jpg
http://i47.tinypic.com/inv692.jpg
http://i46.tinypic.com/adhtz5.jpg
N4 Light Recce Low-Profile 16"
16.1" Cold Hammer Forged Barrel, 1 in 7" twist, 5.56mm
--Made of Mil Spec M249 Machine Gun barrel steel, with heavy M249 Chrome Lining,
(appx. 2 times as thick as an M4 or M16)
--Extended Feed Ramps
--Mil Spec Phosphate finish
--MP HP tested with certification
--Mid-Length gas system, no M203 notch
--Shot peened and MP tested bolt
--Properly staked carrier key
--Auto carrier
--Mil-Spec receiver extension, staked
--H Buffer
--Vltor Carbine buttstock
--Tango Down pistol grip
--Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard
--11" free floated handguard w/ 1913 rails
--Low-profile gas block pinned to barrel
--Flip-up front and rear sights
--Noveske QD End Plate
--One 30 rd mag included
All 5.56mm rifles and uppers are test fired with Black Hills Ammunition.
KalashniKEV
03-05-10, 10:24
Very nice!
Just like mine except I finished my N4 lower w/ a Palmetto kit.
same one Ive got, you have great taste :p
I wish the trigger was lighter, smoother, but after about 3k rounds, its awesomely flawless :D
Very nice! Same rifle I've got, minus the barrel (went stainless over Moly-Chrome). Be sure to post a range-report!
VooDoo6Actual
03-05-10, 11:58
Nice blaster.
damn that looks nice, I have been trying to find a Noveske lower locally for a while for a build but so far no luck. Very Nice!
Sold the other ARs to fund this...
Good choice.
PRGGodfather
03-05-10, 13:33
Gorgeous!
The_War_Wagon
03-05-10, 13:45
I'm jealous! :p
Great set up! Congrats. That is a great all around rifle. Enjoy it and shoot the hell out of it.
SWATcop556
03-05-10, 18:10
Sweet looking bang stick.
Congrats!
Got one as well.
Going to keep it naked or dress it up with RDS/Optics?
Needs a sling, BAD, Gunfighter CH, or maybe not.
MP
Awesome! Now go and shoot it! :D
Add a vcas sling, T1 in larue mount, xtm rail panels and you are set.
Nice.
Did you get it from Noveske?
lethal dose
03-05-10, 20:46
Exactly what is that dead sexy rail you're running?
RogerinTPA
03-05-10, 21:48
Nice weapon...congrats on your wise purchase.
awesome!!!
i was looking for that model too.
if you dont mind, how much and where did you got it from?
I like your tastes,
Congratulations.
Thanks to all for sharing in my excitement! Hope to get to the range soon.
To answer a few questions, I am considering saving for an ACOG, otherwise a T1 like was mentioned. I intend to put a UBR stock on it, possibly a sling, some rail covers, and who knows what else.
I purchased it from Rainier Arms. They charged me about $40 less than Noveske, and only $7.95 for shipping. I ordered it online around 1am, and they shipped it by lunch time.
To the person who asked about the rail, it is made by SWS for Noveske, and came installed.
Can't wait to put a few hundred rounds through her!
lethal dose
03-06-10, 01:05
yeah... so hot.
ColdDeadHands
03-06-10, 06:23
Congrats! Let us know how it shoots.
I dropped a T24G on mine, seems to be a good match.
http://i260.photobucket.com/albums/ii27/bilylovec/noveske/DSC_0047.jpg
arizonaranchman
03-06-10, 11:36
She's beautiful! Very nice set-up.
Randolph, I like that a LOT.
Complication
03-06-10, 17:17
I am considering saving for an ACOG, otherwise a T1 like was mentioned.
Obviously, your mission might dictate an ACOG, but don't forget to consider other options, too.
I really wanted the ability to reach out and touch someone, but, in reality, I'll probably be shooting past 100 yards only rarely. so I got myself an Aimpoint ML3. But I also got the Aimpoint 3x magnifier on a LaRue pivot mount. It'll never be as good as a dedicated 3x scope, I'm sure, but for the price of an ACOG, you could get a red-dot and a magnifier which can pivot out of the way or, using the quick-release, pop off the gun entirely. Good gear, and with LaRue: good mounts.
Exactly what is that dead sexy rail you're running?
It's the regular SWS railed handguard that Noveske puts on all their low profile uppers.
G34Shooter
03-06-10, 21:31
It's the regular SWS railed handguard that Noveske puts on all their low profile uppers.
Actually it's the Noveske spec'd SWS rail :)
Nice rifle BTW, I have the same upper:
http://i941.photobucket.com/albums/ad251/SShenaniguns/IMG_2957-Copy.jpg
Cincinnatus
03-07-10, 01:11
Good choice on your AR. I'm sure you'll be glad you went this route and not suffer from any buyer's remorse. :D Those VLTOR uppers are sweet stuff. Ever noticed how slick the bolt catch release is on them? Smooth and slick!
1811tactikool
03-07-10, 17:29
Awesome bangstick!!
+1 !!
exotic-toys
03-07-10, 17:39
I have the identical rifle arriving at my dealer Tuesday. The only visual difference is I went with an a2 fh and a peel washer. has to accommodate my gemtech ya know ;)
Does Noveske double box these? Did your blem lower come in the same box or a different one?
I have the identical rifle arriving at my dealer Tuesday. The only visual difference is I went with an a2 fh and a peel washer. has to accommodate my gemtech ya know ;)
Does Noveske double box these? Did your blem lower come in the same box or a different one?
The rilfe was in a Noveske Box with egg crate foam, then put inside a shipping box. The lower was wrapped, and in the with rifle. I ordered from Rainier, don't know if that makes a difference. Congrats on your excellent purchase! :D
Are their Gas System is like HK MR-Series?
Are their Gas System is like HK MR-Series?
:confused:
Just curious if you're asking if Noveske has a "gas piston system" as the HK.MR556--then no. Noveske does have a switchblock if one prefers.
very nice sir, looks like a great rifle.
KalashniKEV
03-09-10, 15:02
Since others have posted theirs I'll participate...
http://i145.photobucket.com/albums/r220/Kalashnikev/IMG_0040-1.jpg
:)
It's AWESOME. For ExoticToys, you're going to be very happy if you haven't picked it up already...
exotic-toys
03-09-10, 20:21
KalashniKEV,
It did arrive. :D:D:D:D:D:D
Fit & Finish are superb on this rifle. Noveske really does make a top notch product.
I've owned or still own just about all of the major AR manufactures 20" or M4 clones. I've always been and probably will always be a HUGE Colt fan, but this rifle is incredible. I guess it should be for twice the price of your average AR. I look forward to a day at the range and testing out this SSA trigger as well.
http://img694.imageshack.us/img694/1861/noveske1.jpg
poor setting with a new back drop tonight.
http://img693.imageshack.us/img693/3921/noveske5.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.