Pros & Cons of standard front sight assy. vs folding type

[Jimbo 328]

I would like opinions on what are advantages or disadvantages of fixed standard front sight assembly verses a BUIS type setup?

[C'yotecaller]

Pro's of Standard Front Sight: Rock solid, usually already installed on the rifle, keeps the standard look of an AR rifle, allows co-wintness of electronic sights without having to flip up first.

Con's: Some consider it annoying to look thru a sight like a eo-tec or aimpoint and see the front sight post. Flip up version allows full view thru these sights and standard scopes without having anything in your way, giving it a cleaner view.

It all comes down to what you plan on doing with your rifle. I mainly target shoot from 25-100 yards. So I like the standard front sight to use in conjunction with my eo-tec. I simply put the red dot at the top of the sight post and fire away. However, for longer shooting, 100-400 yards, especially if you want an optic using any kind of zoom above 1X, I would recommend a flip down version, so you dont have a grey blur in the bottom of your scope.

Also, and maybe its just me, but I think the standard front sight post helps keept the original look of the AR compared with some of the "star wars" rifles you see. But its really not something to make your decision on.

[M193 BALL]

I use aimpoint and Eotech with BUIS on my M4`s FLAT TOPS

Both have a FIXED FSB

The FSB doesnt bother me at all

The only way I would use a FOLDING Front Sight is with a SCOPE

or if I used a rifle length QUAD rail on a M4

[Jimbo 328]

I have pretty much the same view I think that for a CQB type carbine w/ EOTECH the front sight assembly is fine but say an ACOG that blur is a distraction to me. Sound like a good excuse to build one of each .

[Steel_Weasel]

I can't stand fixed front sight towers in my field of view! I had an epiphany several years ago while on a moving target range. Using an M4 w/Aimpoint tracking moving targets with other targets popping up. The front sight was annoying as hell when tracking movers and generally buggered up the lower 1/3 of my FOV. I then used an FAL w/Aimpoint where my FOV was totally clear. What a difference! I sent my M4 upper off to GG&G the next day for a modular front sight/gas block. If my optic goes tits up irons takes a second.
It's my preference and works for me.

My Agency currently uses Eotech with the Dominator mount and in that configuration I can ably ignore the front sight tower.

[blackscot]

My fixed FSB bothered me at first through my Aimpoint ML2, because I had it mounted so low that the co-witness was positioned in the center of the field of view.

Then got the Larue LT150 mount that raises the ML2 to where the cowitness is in the lower third of the field. The FSB is now much less distracting with almost all of the view wide open, but still retains instant co-witness capability.

[SuicideHz]

Here's the meat and potatos of it-

Standard FSB retains enough look of the M16 and your rifle will be recognized as such. flip up fronts and then your rilfe will look more exotic at the ranges where there are a lot of novices watching.

take your pic. that's wha it boils down to really...

i have a standard to try and keep a certain amount of the original M16 profile in my rifle. I like new gadgets but the give and take doesn't cut it. If I had 4 rifles you'd see 4 combinations though...

[RWBlue]

Pro-Folding
It was easier to pack in one of the soft cases I use. (no snag)

Con-folding
It is easier to break/loose.

[CarlosDJackal]

I used to find the fixed FS very distracting when using my Aimpoint. Until I was forced to deal with it because I bought a pencil-thin barrel andthe 4-rail gas block I had would not fit it AND I was too cheap another gas block.

I no longer find it a distraction even when using the 3-power magnifier.

Compared to folding sights, the fixed FSB is a more KISS approach to the "problem" (for the lack of a better term). YMMV.

[Stickman]

The more time you have on the weapon, the less you see the FSB through an optic.

[ST911]

Fixed FS leaves you one less thing to do when you need to run the gun. One more widget requiring attention and diversion. One more widget with moving parts.

Paired with the optic and a little bit of practice, it's an omnipresent BUIS. Aligning the FS in the tube of the optic is a peep sight expedient effective at proximal ranges.

[5POINT56]

With money being no object on this build, I went with a fixed for the reasons mentioned here.

http://i150.photobucket.com/albums/s107/5POINT56/NewPix074.jpg

[kill4thrills]

With money being no object on this build, I went with a fixed for the reasons mentioned here.

http://i150.photobucket.com/albums/s107/5POINT56/NewPix074.jpg


beautiful rifle...did you get that upper from MSTN?