View Full Version : The Official GLOCK Picture Thread
4DAIVI PAI2K5
04-08-15, 06:22
http://tapatalk.imageshack.com/v2/15/04/07/4ce314a9589f2c13f984ff9220de5faf.jpg
Sent from my iPhone using Tapatalk
What all did you have done to the gun. It looks like there was a good bit of work put into it.
http://tapatalk.imageshack.com/v2/15/04/07/4ce314a9589f2c13f984ff9220de5faf.jpg
What all did you have done to the gun. It looks like there was a good bit of work put into it.
Lets see how good I think I am, it looks like Robars work, slide cuts, 10-8 or RB-1 sights, one in the same, and refinished in Roguard. Prolly 10-8 since your running his mag base plates also. Beavertail added, magzine scallop cut, finger humps removed, undercut trigger, and his applied texturing. Texturing also on the frame flats, or that is what I refer to them as, area in front of take down point. Oh and Zev Trigger system, How close am I?....:)
TXPO
Cerakote on slide, glock works trigger, slide work done by mars....
But yeah the rest is pretty spot on
Sent from my iPhone using Tapatalk
https://farm8.staticflickr.com/7630/16909601222_19d384c906_z.jpg
Cerakote on slide, glock works trigger, slide work done by mars....
But yeah the rest is pretty spot on
Sent from my iPhone using Tapatalk
Well I tried :)....nice looking setup for sure.
TXPO
https://farm8.staticflickr.com/7630/16909601222_19d384c906_z.jpg
Whoa! How'd you get that?!
Whoa! How'd you get that?!
I'm living in Brazil. Caliber .380 is the best what a civilian can have here. :( I'm a LEO, so this is my backup gun. I carry a .40SW (Taurus PT940) from my PD. I would like get a G19, however it is about impossible for the brazilian firearms laws.
I'm living in Brazil. Caliber .380 is the best what a civilian can have here. :( I'm a LEO, so this is my backup gun. I carry a .40SW (Taurus PT940) from my PD. I would like get a G19, however it is about impossible for the brazilian firearms laws.
I understand. We can't have the G25 or G28 in the USA.
Ficar seguro, meu irmão!
I understand. We can't have the G25 or G28 in the USA.
Ficar seguro, meu irmão!
Stay safe! ;)
Just another one. Glock and ZT :)
https://farm8.staticflickr.com/7417/16559351351_082800062e_c.jpg
32644
Valkyrie Combat just finished my Glock 17
Dakota Glock Guy
04-08-15, 21:10
http://i.imgur.com/z7XbeX3.jpg
4DAIVI PAI2K5
04-08-15, 21:35
32644
Valkyrie Combat just finished my Glock 17
Yo dawg I heard you like slide serations, so I put slide serations on your slide serations.
In a more serious note. What mags are those?
So are these glock guns popular or would buying one be a bad investment? I kinda want a reliable handgun.
So are these glock guns popular or would buying one be a bad investment? I kinda want a reliable handgun.
http://i1195.photobucket.com/albums/aa393/officerfrasher/Funny%20Pic%20Posts/ab0f7daf-1.jpg
Yes, they're reliable. There are those that don't like them because they're "plastic", but that doesn't seem to stop a majority of law enforcement agencies from using them for years now. Not to mention the countless numbers they've sold to civilians.
Yo dawg I heard you like slide serations, so I put slide serations on your slide serations.
In a more serious note. What mags are those?
They are just factory Glock mags that Valkyrie Combat puts slots in.
4DAIVI PAI2K5
04-09-15, 06:16
They are just factory Glock mags that Valkyrie Combat puts slots in.
Curious what the benefits are? I have never heard or seen of this being done.
So are these glock guns popular or would buying one be a bad investment? I kinda want a reliable handgun.
Glocks are pisss poor financial investments, but they're cheap as far as guns go, if you want something that works....
Curious what the benefits are? I have never heard or seen of this being done.
Seems that a terrible idea to me
Sent from my iPhone using Tapatalk
4DAIVI PAI2K5
04-09-15, 09:02
Seems that a terrible idea to me
Sent from my iPhone using Tapatalk
That was my thought also, but I was curious.
This isn't a plastic gun:
http://i.imgur.com/emLhSyI.jpg
Rattlehead
04-10-15, 15:40
G21SF
https://farm9.staticflickr.com/8725/16915701699_4957e2a512_b.jpg
http://images.tapatalk-cdn.com/15/04/11/8b3c761242004447c69ac94109d99e0b.jpg
New Silencerco barrel
Sent from my iPhone using Tapatalk
Voodoo_Man
04-11-15, 13:43
http://i.imgur.com/8dTItpc.jpg
http://images.tapatalk-cdn.com/15/04/11/8b3c761242004447c69ac94109d99e0b.jpg
New Silencerco barrel
Sent from my iPhone using Tapatalk
Sick
Trimmed the body shields down on the Raven holster, much less irritating from a draw now (thumb getting raw after reps thanks to the longer left side shield. fixed now)
https://farm9.staticflickr.com/8720/17112637161_d8be7d08ae_b.jpg
Sick
Trimmed the body shields down on the Raven holster, much less irritating from a draw now (thumb getting raw after reps thanks to the longer left side shield. fixed now)
https://farm9.staticflickr.com/8720/17112637161_d8be7d08ae_b.jpg
your GC is missing the rotary switch...
Yeah it just has quadra drive I or whatever. Coming from a Rubicon with lockers on 35s, I didn't want to try and make this something it's not. I'm good with AWD only, I'd rather put the $ towards smaller wheels and good all terrains.
https://farm9.staticflickr.com/8686/17124779471_496bb6a5b3_o.jpg
http://i1259.photobucket.com/albums/ii551/PalmguyFL/DSC_2864-Edit-2_zpss01ei7ub.jpg
https://farm8.staticflickr.com/7718/17144764842_c05f7a9ef6_b.jpg (https://flic.kr/p/s82pgQ)SD8A3592-Edit.jpg (https://flic.kr/p/s82pgQ) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
My new G43 9mm. Just picked it up this morning.
SamM
32812
Eagerly awaiting Rattlehead and Dakota to put their magic touch on a G43...
Dakota Glock Guy
04-18-15, 12:33
Eagerly awaiting Rattlehead and Dakota to put their magic touch on a G43...
Ask, and you shall receive!!!
G43 hot of the bench...
http://i.imgur.com/uwG294q.jpg
http://i.imgur.com/SNaBaxI.jpg
Ask, and you shall receive!!!
G43 hot of the bench...
http://i.imgur.com/uwG294q.jpg
http://i.imgur.com/SNaBaxI.jpg
Top Drawer good sir! Top Drawer!
Voodoo_Man
04-18-15, 16:21
http://i.imgur.com/M7Aa7LJ.jpg
RedRallyeZ
04-19-15, 16:21
G33
G19 Gen4
G43 picked up this week.
Eventually hope to add a G31 & 32 to the mix, I love 357 sig.
http://i106.photobucket.com/albums/m271/GeeReyZ28/guns/5F7AE20D-5BAC-43DD-AAD1-EC7EB52B2D33_zpsyvjft5no.jpg (http://s106.photobucket.com/user/GeeReyZ28/media/guns/5F7AE20D-5BAC-43DD-AAD1-EC7EB52B2D33_zpsyvjft5no.jpg.html)
http://i106.photobucket.com/albums/m271/GeeReyZ28/guns/5C532A4A-4425-413E-BE8A-8E07908CB71F_zpsp3tnfa40.jpg (http://s106.photobucket.com/user/GeeReyZ28/media/guns/5C532A4A-4425-413E-BE8A-8E07908CB71F_zpsp3tnfa40.jpg.html)
Picked up a 31C top end to make this...the 31C RTF2!
http://i.imgur.com/K0rY4c2.jpg
http://i.imgur.com/gGVpcON.jpg
http://i.imgur.com/1ePfwOa.jpg
new acquisition
http://i356.photobucket.com/albums/oo5/toppyjai/IMG_20150420_194653_zps9eccbf1t.jpg (http://s356.photobucket.com/user/toppyjai/media/IMG_20150420_194653_zps9eccbf1t.jpg.html)
my DIY stippling and trigger guard undercuts
http://i356.photobucket.com/albums/oo5/toppyjai/IMG_20150420_211615735_HDR_zpsoww7bcec.jpg (http://s356.photobucket.com/user/toppyjai/media/IMG_20150420_211615735_HDR_zpsoww7bcec.jpg.html)
Voodoo_Man
04-23-15, 06:17
http://i.imgur.com/PuVxjc2.jpg
Rattlehead
04-24-15, 00:27
https://farm9.staticflickr.com/8756/16464194253_866ca46835_b.jpg
Very nice. How does that group compare to your groups with the factory barrel?
The factory barrel is ever so slightly more accurate but I had only shot some of the $10.97 Walmart ammo through the LWD barrel while I had really excellent results with 125gr Zero jacketed truncated cone bullets in 9mm Luger and 357 SIG..
jeremycase00
04-26-15, 00:13
https://farm9.staticflickr.com/8756/16464194253_866ca46835_b.jpg
Very nice stippling job on the Timberwolf frame. Did you do that yourself?
PatrioticDisorder
04-26-15, 08:17
new acquisition
http://i356.photobucket.com/albums/oo5/toppyjai/IMG_20150420_194653_zps9eccbf1t.jpg (http://s356.photobucket.com/user/toppyjai/media/IMG_20150420_194653_zps9eccbf1t.jpg.html)
my DIY stippling and trigger guard undercuts
http://i356.photobucket.com/albums/oo5/toppyjai/IMG_20150420_211615735_HDR_zpsoww7bcec.jpg (http://s356.photobucket.com/user/toppyjai/media/IMG_20150420_211615735_HDR_zpsoww7bcec.jpg.html)
YIKES!
https://farm9.staticflickr.com/8756/16464194253_866ca46835_b.jpg
I'm digging the stippling. Very nice!
YIKES!
yikes meaning its a poor stippling job or yikes because you think that its a g43??
pic thread -
http://i356.photobucket.com/albums/oo5/toppyjai/IMG_20150420_211615735_HDR_zpsoww7bcec.jpg (http://s356.photobucket.com/user/toppyjai/media/IMG_20150420_211615735_HDR_zpsoww7bcec.jpg.html)
Dakota Glock Guy
04-28-15, 14:35
http://i.imgur.com/Nx4GghK.jpg
http://i.imgur.com/e89n3TL.jpg
Maiden3.16
04-30-15, 00:01
My first G19. Bought it used and had it about 2 hrs before digging into it
http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpsiebkotec.jpg (http://s1382.photobucket.com/user/Maiden316/media/Mobile%20Uploads/image_zpsiebkotec.jpg.html)
33050
Just a stock 19 with night sights before I send her out for some work.
travward89
05-01-15, 22:57
http://i1334.photobucket.com/albums/w657/thward89/FullSizeRender_zps5hc0q2fd.jpg (http://s1334.photobucket.com/user/thward89/media/FullSizeRender_zps5hc0q2fd.jpg.html)
http://i1334.photobucket.com/albums/w657/thward89/FullSizeRender_zps5hc0q2fd.jpg (http://s1334.photobucket.com/user/thward89/media/FullSizeRender_zps5hc0q2fd.jpg.html)
As I get older…..everything seems slippery to me.
I like the longer area of rear serrations and the addition of longer area of front slide serrations. And they match! NICE!
who did the work?
thanks in advance
travward89
05-01-15, 23:53
As I get older…..everything seems slippery to me.
I like the longer area of rear serrations and the addition of longer area of front slide serrations. And they match! NICE!
who did the work?
thanks in advance
Doug over at ATEi did the slide work. Check them out (ateiguns.com). They are the best out there. Nothing with them is for looks, only function. The rear serrations (and front) are also cut deeper and wider to give a very positive feel. Slide manipulation is unbelievably easy with Doug's work. Turn around time was also surprisingly quick (maybe 3 weeks).
Team Kabob
05-02-15, 00:15
http://images.tapatalk-cdn.com/15/05/01/6fbd0235a4c0b69b429b1b241eb9fcd1.jpg
The 10mm got a friend!
-)---> ¥
Got him!
33070 brand new gen 4 g 26 hot off the press.
Gen 4 G17 + Wilson LAV sights, LAV extended slide release.
https://farm9.staticflickr.com/8685/17332655422_dc638615d8_o.jpg
https://farm9.staticflickr.com/8772/17154590450_a015a01db6_b.jpg (https://flic.kr/p/s8TL5S)Secondary.jpg (https://flic.kr/p/s8TL5S) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
Gen 3 G34
http://images.tapatalk-cdn.com/15/05/02/df7139d7cf90f26f24a82268ae325b90.jpg
4DAIVI PAI2K5
05-03-15, 06:14
Gen 3 G34
http://images.tapatalk-cdn.com/15/05/02/df7139d7cf90f26f24a82268ae325b90.jpg
Does that sight plate hold tight for you, and can you get the adjustment from the dot that you need with the height being more then a milled slide?
Does that sight plate hold tight for you, and can you get the adjustment from the dot that you need with the height being more then a milled slide?
Yea it's held tight so far. It's had about 300 rds thru it with the sight on it. And yes you get enough adjustment out of the sight and it hold zero very well.
bowman57_2
05-03-15, 21:11
Painted my LAV G19 a few hours ago since the baby poop green looked horrible
Heres a pic from while I was painting:
http://i376.photobucket.com/albums/oo203/boooomer96/image.jpg3_zpsx8rberfi.jpg (http://s376.photobucket.com/user/boooomer96/media/image.jpg3_zpsx8rberfi.jpg.html)
All finished up:
http://i376.photobucket.com/albums/oo203/boooomer96/image.jpg7_zpsgd0ziuzn.jpg (http://s376.photobucket.com/user/boooomer96/media/image.jpg7_zpsgd0ziuzn.jpg.html)
The scuffs on the grip are dust and wiped right off.
That actually looks really sharp, man.
I finally broke down and stippled my Gen 4.
http://i1372.photobucket.com/albums/ag347/GTF425/image1_zpsjyordyhw.jpg
That actually looks really sharp, man.
I finally broke down and stippled my Gen 4.
http://i1372.photobucket.com/albums/ag347/GTF425/image1_zpsjyordyhw.jpg
That looks very nice!!! I wish I had the confidence to do that... Fear of failure or rather fear of destroying beyond fixing haunts me...
bowman57_2
05-03-15, 21:25
That actually looks really sharp, man.
I finally broke down and stippled my Gen 4.
Appreciate it, I love the RTF2 but the color looked awful it wasnt anything like your gen4.
bowman57_2
05-03-15, 23:28
https://farm9.staticflickr.com/8772/17154590450_a015a01db6_b.jpg (https://flic.kr/p/s8TL5S)Secondary.jpg (https://flic.kr/p/s8TL5S) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
Sick rifle in the background.
Sick rifle in the background.
Thanks man
http://i.imgur.com/Nx4GghK.jpg
http://i.imgur.com/e89n3TL.jpg
Who did your frame stippling?
4DAIVI PAI2K5
05-05-15, 07:39
Who did your frame stippling?
He does.
Tactical Texture (http://www.tacticaltexture.com/)
Friend's Glock 19, I just took the pics.
https://farm8.staticflickr.com/7696/17158286768_21e6b8d371_b.jpg (https://flic.kr/p/s9dGSu)
Gen3 G19 (https://flic.kr/p/s9dGSu) by Damage Photos (https://www.flickr.com/people/83018433@N04/), on Flickr
https://farm8.staticflickr.com/7702/17320112096_4923c4d08b_b.jpg (https://flic.kr/p/sow6Um)Nut (https://flic.kr/p/sow6Um) by Damage Photos (https://www.flickr.com/people/83018433@N04/), on Flickr
https://farm8.staticflickr.com/7791/17344194222_a34fc9dcc6_b.jpg (https://flic.kr/p/sqDwFq)
Lone Wolf Protector (https://flic.kr/p/sqDwFq) by Damage Photos (https://www.flickr.com/people/83018433@N04/), on Flickr
https://farm9.staticflickr.com/8816/17344194652_d9f13faf2c_b.jpg (https://flic.kr/p/sqDwNQ)
Another TLR (https://flic.kr/p/sqDwNQ) by Damage Photos (https://www.flickr.com/people/83018433@N04/), on Flickr
https://farm9.staticflickr.com/8805/17173410807_c4efbd4950_o.jpg
G22 in its natural habitat.
http://i197.photobucket.com/albums/aa215/tuckinauster/gun%20porn/ABE65955-E02B-46DD-8267-C03B63C32547_zps3oyufa9i.jpg (http://s197.photobucket.com/user/tuckinauster/media/gun%20porn/ABE65955-E02B-46DD-8267-C03B63C32547_zps3oyufa9i.jpg.html)
Sent from my iPhone using Tapatalk
Rattlehead
05-06-15, 15:27
G30S
https://farm9.staticflickr.com/8735/17119675778_6555006e11_b.jpg
Voodoo_Man
05-06-15, 15:58
http://i.imgur.com/S63beRM.jpg
bowman57_2
05-06-15, 16:34
A few more of my LAV 19:
http://i376.photobucket.com/albums/oo203/boooomer96/Mobile%20Uploads/image.jpg4_zpszsiyo1ec.jpg (http://s376.photobucket.com/user/boooomer96/media/Mobile%20Uploads/image.jpg4_zpszsiyo1ec.jpg.html)
http://i376.photobucket.com/albums/oo203/boooomer96/Mobile%20Uploads/image.jpg2_zpsyrx2k4l8.jpg (http://s376.photobucket.com/user/boooomer96/media/Mobile%20Uploads/image.jpg2_zpsyrx2k4l8.jpg.html)
Voodoo_Man
05-07-15, 15:04
http://i.imgur.com/bHV6XmJ.jpg
4DAIVI PAI2K5
05-07-15, 15:13
G30S
https://farm9.staticflickr.com/8735/17119675778_6555006e11_b.jpg
That patch lol.
http://images.tapatalk-cdn.com/15/05/07/c27d7341644a0bbf965d709ff991fed3.jpg
Don't remember if I posted 'em up or not here yet. Both guns have stock internals.
G19 has steel rear stock sight and a front night sight as does the G17. I personally find the stock style sights to be pretty quick and precise for me. LV base plates.
All the rest of my gun money goes into ammo to learn how to shoot to the best of my equipments ability. I might do some other work later on to them.
I keep a log for my G19 and in 10 months I have logged 5611 rounds through it which isn't a lot to some but to my bank account and my wife apparently it's excessive.
Semper Fi
G30S
https://farm9.staticflickr.com/8735/17119675778_6555006e11_b.jpg
Nice!
RiflemanBobcat
05-07-15, 17:35
G30S
https://farm9.staticflickr.com/8735/17119675778_6555006e11_b.jpg
There's only one thing about this picture I don't really like: nothing in it is mine ;)
That patch lol.
The OG derp haha
https://farm8.staticflickr.com/7672/17417663552_531b87b511_o.jpg
Really starting to come around to the Gen 4 Glocks. Shot a 97-3x @ 25 yards with 124gr Blazer. Save the sights and stippling, it's all factory for now.
http://i1372.photobucket.com/albums/ag347/GTF425/05DDCC76-76F3-4453-9536-821085983757-1322-000001C3DA5D5BD4_zps7jrmzrig.jpg
Also managed this 5-shot group at 50 yards offhand with some Nosler 124gr JHPs. My 17 really like this stuff.
http://i1372.photobucket.com/albums/ag347/GTF425/F646B570-C6A7-4ABD-98A0-DC42F6235831-1322-000001C3EA1D6CCB_zpspefrn3z3.jpg
http://i58.tinypic.com/2hxncqx.jpg
Gen 3 19 with gripforce adapter. Best 20 bucks I've ever spent on that adapter
http://i58.tinypic.com/2hxncqx.jpg
Gen 3 19 with gripforce adapter. Best 20 bucks I've ever spent on that adapter
Very nice
jimmyheadgear
05-10-15, 08:00
My Glock AR9
http://i19.photobucket.com/albums/b189/jimmyheadgear/DSC_6072%20Large_zpsxiysukwj.jpg
With my G19
http://i19.photobucket.com/albums/b189/jimmyheadgear/DSC_6076%20Large_zpscvobxzk4.jpg
G30S
https://farm9.staticflickr.com/8735/17119675778_6555006e11_b.jpg
That patch lol.
Nice!
There's only one thing about this picture I don't really like: nothing in it is mine ;)
The OG derp haha
Am I the only one that noticed the f'up slide release?
What happened to the slide release RH? Nice work as usual on the frame tho :cool:
4DAIVI PAI2K5
05-10-15, 12:24
Am I the only one that noticed the f'up slide release?
What happened to the slide release RH? Nice work as usual on the frame tho :cool:
Yep, until you said something. Assuming it is to help prevent riding the slide release.
jahwarrior1423
05-10-15, 12:28
Several people cut the whole slide release off...
jahwarrior1423
05-10-15, 12:38
3319633197
Rattlehead
05-10-15, 15:28
That patch lol.
Nice!
There's only one thing about this picture I don't really like: nothing in it is mine ;)
The OG derp haha
Thank you, there's actually a few of those patches left on the site. :cool:
Am I the only one that noticed the f'up slide release?
What happened to the slide release RH? Nice work as usual on the frame tho :cool:
Yep, until you said something. Assuming it is to help prevent riding the slide release.
Yep, this customer always cuts them back so he doesn't lock the slide back unintentionally.
I've never had that issue with Glocks but for some people it's a major problem, that's just his solution to it.
Pic thread:
https://farm9.staticflickr.com/8817/16702810994_7531a8cac5_c.jpg
https://farm8.staticflickr.com/7680/16882185344_b52d9e4c8d_o.jpg
BravoHotel
05-10-15, 21:07
http://i58.tinypic.com/2hxncqx.jpg
Gen 3 19 with gripforce adapter. Best 20 bucks I've ever spent on that adapter
I concur on the gripforce adapter. What holster is that?
bowman57_2
05-10-15, 22:15
http://i58.tinypic.com/2hxncqx.jpg
Gen 3 19 with gripforce adapter. Best 20 bucks I've ever spent on that adapter
This pic makes me wanna get a gen3 19 to put a GFA on it. Looks sweet
Voodoo_Man
05-11-15, 20:33
http://i.imgur.com/TKFfQHN.jpg
Nightstalker865
05-11-15, 22:44
Gen 4 G17 + Wilson LAV sights, LAV extended slide release.
https://farm9.staticflickr.com/8685/17332655422_dc638615d8_o.jpg
How do you like the holster so far?
Sent from my iPhone using Tapatalk
Dakota Glock Guy
05-11-15, 23:06
http://i.imgur.com/TKFfQHN.jpg
New Defoor Night sights? If so, where did you get them!??
Also, if that is what the front sight is, does it work with the Defoor rear?
Dakota Glock Guy
05-11-15, 23:11
New Defoor Night sights? If so, where did you get them!??
Also, if that is what the front sight is, does it work with the Defoor rear?
Nevermind, I just found them on Ameriglo's site. Looks like it's just a thicker front (.125 vs. .115), but the same height as the stock Defoor's.
I'll be getting some of these for my Glocks soon!
How do you like the new front sight???
Voodoo_Man
05-12-15, 06:43
Nevermind, I just found them on Ameriglo's site. Looks like it's just a thicker front (.125 vs. .115), but the same height as the stock Defoor's.
I'll be getting some of these for my Glocks soon!
How do you like the new front sight???
Yeah new defoors. I have the all blacks too and these a hair thicker but still very accurate as the originals. Im still testing them.
Yeah new defoors. I have the all blacks too and these a hair thicker but still very accurate as the originals. Im still testing them.
Very cool! I didn't even know that these were out. I love and have been using the standard all black Defoor's. I may purchase the night sight model for my 43.
Voodoo_Man
05-12-15, 12:23
Very cool! I didn't even know that these were out. I love and have been using the standard all black Defoor's. I may purchase the night sight model for my 43.
I am a big fan of the all black defoor, very accurate sights.
How do you like the holster so far?
Sent from my iPhone using Tapatalk
Conceals full sized guns remarkably well. The combination of the wedge and claw/pusher helps push the belt/waist line out uniformly and help conceals the gun a little better. I like how modular the holster is.
The one downside I'm finding is that the wedge on the bottom digs into me a little too much and is uncomfortable when sitting. I'm experimenting with different configurations, but I've removed the wedge for now (at the cost of slightly more printing).
https://farm9.staticflickr.com/8752/17569077321_0a815d2121_o.jpg
4DAIVI PAI2K5
05-12-15, 14:16
Conceals full sized guns remarkably well. The combination of the wedge and claw/pusher helps push the belt/waist line out uniformly and help conceals the gun a little better. I like how modular the holster is.
The one downside I'm finding is that the wedge on the bottom digs into me a little too much and is uncomfortable when sitting. I'm experimenting with different configurations, but I've removed the wedge for now (at the cost of slightly more printing).
https://farm9.staticflickr.com/8752/17569077321_0a815d2121_o.jpg
Trying running it with a single loop over the trigger guard area. That is how I have found carry AWIB most comfortable with wth my wedge holsters
Trying running it with a single loop over the trigger guard area. That is how I have found carry AWIB most comfortable with wth my wedge holsters
Yep, I took off one loop since day 2 and run it one over the trigger guard. I'm making my own impromptu wedge that is a little softer to see if it helps with comfort.
43
http://i1238.photobucket.com/albums/ff482/laddmc/IMG_5526_zpsjohblvnf.jpg
KentuckyWindage
05-12-15, 18:39
http://i62.tinypic.com/10e1seb.jpg
My beloved Glock 17. Used, abused and keeps asking for more. Ok here is better one. With my 17 and 26.
http://i1219.photobucket.com/albums/dd433/Etho82/Guns/NCM_0044_zpsghwn64eo.jpg (http://s1219.photobucket.com/user/Etho82/media/Guns/NCM_0044_zpsghwn64eo.jpg.html)
http://i.imgur.com/I6w9dNq.jpg
Police trade in i had refinished in gunkote
https://c1.staticflickr.com/9/8692/17029270664_d01482bd93_b.jpg (https://flic.kr/p/rWPsSU)
G19 and M&P (https://flic.kr/p/rWPsSU) by David Pyzik (https://www.flickr.com/photos/damagephotos/), on Flickr
https://c1.staticflickr.com/9/8692/17029270664_d01482bd93_b.jpg (https://flic.kr/p/rWPsSU)
G19 and M&P (https://flic.kr/p/rWPsSU) by David Pyzik (https://www.flickr.com/photos/damagephotos/), on Flickr
Dig it
4DAIVI PAI2K5
05-15-15, 19:06
https://c1.staticflickr.com/9/8717/17082027713_cd3cd368e0_z.jpg (https://flic.kr/p/s2tRHc)p1 (https://flic.kr/p/s2tRHc) by 4DAIVIPAI2K5 (https://www.flickr.com/photos/40500049@N08/), on Flickr
Pic
That stippling looks great. Very well done.
4DAIVI PAI2K5
05-15-15, 20:38
That stippling looks great. Very well done.
Thanks a buddy done it for me. Going to get back ffl set up so he can do more
https://c4.staticflickr.com/8/7757/17519491809_6313cb92bb_c.jpg (https://flic.kr/p/sG8YxB)Glock 17 (https://flic.kr/p/sG8YxB) by James (https://www.flickr.com/photos/129035724@N05/), on Flickr
http://i1259.photobucket.com/albums/ii551/PalmguyFL/DSC_0184-Edit_zpsvelvo3qd.jpg
KentuckyWindage
05-18-15, 17:23
http://i59.tinypic.com/2cy4oih.jpg
https://farm9.staticflickr.com/8861/17724610612_5ca434470f_b.jpg (https://flic.kr/p/t1ggdG)SD8A4498-Edit.jpg (https://flic.kr/p/t1ggdG) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
http://i1259.photobucket.com/albums/ii551/PalmguyFL/DSC_0184-Edit_zpsvelvo3qd.jpg
This is a killer shot! Nicely done
http://i.imgur.com/5totqMql.jpg
jeremycase00
05-18-15, 22:21
33294
Sent from my SM-G920V using Tapatalk
jeremycase00
05-18-15, 22:23
33295 First pic was too dark.
Sent from my SM-G920V using Tapatalk
Rattlehead
05-18-15, 23:10
Much cut. Very under. So double. Wow.
https://farm6.staticflickr.com/5340/17844439811_577f6ae0cf_b.jpg
Voodoo_Man
05-19-15, 07:32
http://i.imgur.com/TUVyCOv.jpg
Renegade04
05-19-15, 08:50
http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Glocks_zps25bbed9c.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Glocks_zps25bbed9c.jpg.html)
snake eater 332
05-19-15, 10:15
Here's my EDC - Glock 17 Gen 4 FDE frame (stippled, undercut trigger and support hand reference, and beaver tail added by Danger Close Armaments in Lakewood, CO), pictured with Surefire X300 weapon light in some pics. Recently added the Vickers extended slide release and the FDE Vickers mag release.
In the near future, I'm looking to grab a threaded barrel for it (as a suppressor host) and either Unity Tactical ATOM slide or a RMR-cut slide with front serrations.
http://images.tapatalk-cdn.com/15/05/19/eba6d1acf8e5774776aa64e366b7faef.jpg
http://images.tapatalk-cdn.com/15/05/19/4dbb0a5d80b61d470c088e8fe70202bf.jpg
http://images.tapatalk-cdn.com/15/05/19/ee3665a9a441c5aac9abefd715adfe74.jpghttp://images.tapatalk-cdn.com/15/05/19/2414a98bdedbf35f0ff948eeb1b9ecc5.jpg
Si vis pacem, para bellum
Warrior, Patriot, Father, and Cunning Linguist
This is a killer shot! Nicely done
Thank you sir.
Voodoo_Man
05-20-15, 07:35
http://i.imgur.com/2TCpot5.jpg
WickedWillis
05-20-15, 10:46
http://i.imgur.com/2TCpot5.jpg
Be careful when dramatically pulling your 17L into your chest to do an over exaggerated area check. That looks like it would pierce armor :lol:
Pic thread, I hate following you talented Gents in these; G43
http://i1273.photobucket.com/albums/y409/Wickedwillis/G43_zps0qdv5oxu.jpg (http://s1273.photobucket.com/user/Wickedwillis/media/G43_zps0qdv5oxu.jpg.html)
http://i.imgur.com/2TCpot5.jpg
The LümTec watch is badass!
Voodoo_Man
05-21-15, 11:25
http://i.imgur.com/hP0ARW0.jpg
https://c1.staticflickr.com/9/8834/17951323452_6cca8c8f84_b.jpg (https://flic.kr/p/tmie3L)Untitled (https://flic.kr/p/tmie3L) by Cory Fluck (https://www.flickr.com/photos/101418915@N07/), on Flickr
Voodoo,
Your 17L and blade brought me back to this.
http://i845.photobucket.com/albums/ab12/nbeng92/metal-gear-solid-3-snake-eater-20040511114440289_zpszzdpr1v5.jpg (http://s845.photobucket.com/user/nbeng92/media/metal-gear-solid-3-snake-eater-20040511114440289_zpszzdpr1v5.jpg.html)
The LümTec watch is badass!
+1... I'd be a compete Lum Tec whore if I could afford it. I have a 2009 Combat B2 and want about 6 more of their watches
Voodoo_Man
05-22-15, 08:45
Voodoo,
Your 17L and blade brought me back to this.
http://i845.photobucket.com/albums/ab12/nbeng92/metal-gear-solid-3-snake-eater-20040511114440289_zpszzdpr1v5.jpg (http://s845.photobucket.com/user/nbeng92/media/metal-gear-solid-3-snake-eater-20040511114440289_zpszzdpr1v5.jpg.html)
I can't help that they make game character after me...
;)
https://c2.staticflickr.com/6/5467/17826853168_53f8ff3af6_b.jpg (https://flic.kr/p/taihno)Untitled (https://flic.kr/p/taihno) by Cory Fluck (https://www.flickr.com/photos/101418915@N07/), on Flickr
https://c2.staticflickr.com/6/5467/17826853168_53f8ff3af6_b.jpg (https://flic.kr/p/taihno)Untitled (https://flic.kr/p/taihno) by Cory Fluck (https://www.flickr.com/photos/101418915@N07/), on Flickr
Great pair! You've got all your bases covered in those two.
Kinda off topic, but I really wish Glock had made the G40 the same length as the 41, instead of the unwieldy length they made it.
Fuzzy-Reticle
05-24-15, 17:02
I found a NIB GEN4 G23 for a steal last week. Love how it shoots.
http://i288.photobucket.com/albums/ll190/fuzzyreticle/Glock/4d74ed5282ee3ac3047acbb2d9dd37b1_zps38nloxnq.jpg
Just picked up a new IWB holster.
http://i58.tinypic.com/mvp7hc.jpg
A couple of days ago I traded my VP9 for this NIB G19.4 I found on Armslist. I already have a G26.4, a G17.4, a G19.2 and a G19.3 so this was my missing link.
33374
Cagemonkey
05-24-15, 18:58
A couple of days ago I traded my VP9 for this NIB G19.4 I found on Armslist. I already have a G26.4, a G17.4, a G19.2 and a G19.3 so this was my missing link.
33374Understand the need for another Glock, but this is a step down IMHO. BTW, I got a G19 and love it.
Understand the need for another Glock, but this is a step down IMHO. BTW, I got a G19 and love it.
If I want to shoot a nonGlock I'll shoot my PPQ or better yet my M9-A1.
Cagemonkey
05-24-15, 19:39
If I want to shoot a nonGlock I'll shoot my PPQ or better yet my M9-A1.Good choices.
Rattlehead
05-29-15, 02:08
https://farm8.staticflickr.com/7752/17996224988_5818380e0c_c.jpg
^^^ photoshop? (I hope, lol) looks like that thing could shoot down airplanes with that rear sight :p
Just picked up a new IWB holster.
http://i58.tinypic.com/mvp7hc.jpg
Who makes the holster??
Sent from my iPhone using Tapatalk
Not my first Glock or my first 19, but the first time I broke one in in the rain.http://images.tapatalk-cdn.com/15/06/01/843bdef7b17a6886eba23ce46a3f5ceb.jpg
Voodoo_Man
06-01-15, 14:36
https://farm8.staticflickr.com/7752/17996224988_5818380e0c_c.jpg
lol wut.
lol wut.
I think its a "loudner"....dunno for sure though, lol.
xandercruzz
06-02-15, 13:34
http://images.tapatalk-cdn.com/15/06/02/d9055de69fb514c04454ceffe614e881.jpg
Sent from my iPhone using Tapatalk
http://i58.tinypic.com/a065s.jpg
Hello my name is Robert and I am a Glockaholic :)
http://i356.photobucket.com/albums/oo5/toppyjai/IMG_20150607_003844_zpsg76j0gb3.jpg (http://s356.photobucket.com/user/toppyjai/media/IMG_20150607_003844_zpsg76j0gb3.jpg.html)
https://c1.staticflickr.com/1/448/18634061361_5a5103a3d6_o.jpg
Maiden3.16
06-09-15, 12:23
Glock 30s all did up with Ameriglo Cap sights
http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpsjc1ugbhq.jpg (http://s1382.photobucket.com/user/Maiden316/media/Mobile%20Uploads/image_zpsjc1ugbhq.jpg.html)
Dakota Glock Guy
06-09-15, 13:23
http://i.imgur.com/COifcgW.jpg
Dirty Glocks and muddy Jeeps. Two of my favorite things!
http://www.vomschmidthaus.com/img/jku/muddy_jeep_dirty_glock.jpg
http://i.imgur.com/COifcgW.jpg
Nice!
Dakota Glock Guy
06-09-15, 19:03
Nice!
I'm glad YOU think so!
Of course you'll get to see it in real life tomorrow... :)
I'm glad YOU think so!
Of course you'll get to see it in real life tomorrow... :)
Oh Yeah!!!!!! Lookin' for a truck!
So Fedex brought this to me today!!! I've taken some pics but none as good as this one. This gun is so much better looking in person and feels great in the hand. Mike worked some serious magic and I can't wait to shoot it this weekend. I'll report back after shooting.
Thanks Mike
http://i.imgur.com/COifcgW.jpg
Here are my Glocks, My 27, 22, and 35 :)
33672
Voodoo_Man
06-11-15, 11:53
http://i.imgur.com/QI89rt7.jpg
My FDE colored Glock 40 caliber converted to 357 Sig with stainless Wolf barrel, Glock Tru-Dot tritium Night Sights, and Christian cross, resting on Bianchi Black Widow holster. [emoji41]
33722
Sent from my Nexus 7 using Tapatalk
Glock 17. Slide by tuebor precision, frame work by myself.
http://images.tapatalk-cdn.com/15/06/13/d042e80840a838acc83a594c1aca5c3d.jpg
http://images.tapatalk-cdn.com/15/06/13/9984bd75a4a371aee5ac3c98ae9397cd.jpg
http://images.tapatalk-cdn.com/15/06/13/764556a719fe60cd3506db02175051d9.jpg
Derek
Sent from my iPhone using Tapatalk
Very nice frame work. The stippling looks clean and sharp.
Scotter260
06-15-15, 22:10
Sold off my 1st Generation of Transformers a few months back and used the funds to buy a Gen4 19. Initially installed a NY1 and 3.5 connector but it seemed extremely heavy compared to my Gen3 17 and 26 with the same treatment. Replaced the parts with originals and now feels the same as the 17 and 26 - odd.
http://i1185.photobucket.com/albums/z352/Scotter260/Gen419_zpssxshbrhx.jpg
I need more glocks in my life.
https://farm9.staticflickr.com/8384/8625007761_0fc008bcd3_h.jpg
Rattlehead
06-18-15, 23:36
https://farm6.staticflickr.com/5574/18914532495_8b6260a6c7_b.jpg
https://farm1.staticflickr.com/465/18292030934_e7bbcd4d32_b.jpg
http://i605.photobucket.com/albums/tt134/rslamiroult/IMG_20150620_150808.jpg (http://s605.photobucket.com/user/rslamiroult/media/IMG_20150620_150808.jpg.html)
http://i605.photobucket.com/albums/tt134/rslamiroult/IMG_20150623_163233_1.jpg (http://s605.photobucket.com/user/rslamiroult/media/IMG_20150623_163233_1.jpg.html)
glocksalot
06-30-15, 20:39
picked up my new duty guns today
http://imagizer.imageshack.us/v2/xq90/910/ojDk8C.jpg (https://imageshack.com/i/paojDk8Cj)
picked up my new duty guns today
http://imagizer.imageshack.us/v2/xq90/910/ojDk8C.jpg (https://imageshack.com/i/paojDk8Cj)
are those black Talons in the mags?
glocksalot
06-30-15, 21:41
yes sir
Rattlehead
07-01-15, 00:37
EPP Glock 19-26 grip chop
https://farm1.staticflickr.com/401/19318301811_8345cb0f4c_c.jpg
Voodoo_Man
07-01-15, 03:26
http://i.imgur.com/XzWARLE.jpg
Voodoo,
Is that frag PPD standard issue?
Voodoo_Man
07-01-15, 15:02
Voodoo,
Is that frag PPD standard issue?
If I said no would you believe me?
Maiden3.16
07-01-15, 17:53
If you want to make your Glock more American, add firepower
http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpskmem7ilb.jpg (http://s1382.photobucket.com/user/Maiden316/media/Mobile%20Uploads/image_zpskmem7ilb.jpg.html)
WickedWillis
07-01-15, 18:40
If you want to make your Glock more American, add firepower
http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpskmem7ilb.jpg (http://s1382.photobucket.com/user/Maiden316/media/Mobile%20Uploads/image_zpskmem7ilb.jpg.html)
One of the most underrated Glocks IMO. Pic Thread;
http://i1273.photobucket.com/albums/y409/Wickedwillis/unnamed_zpsrhi7rvfi.jpg (http://s1273.photobucket.com/user/Wickedwillis/media/unnamed_zpsrhi7rvfi.jpg.html)
http://i605.photobucket.com/albums/tt134/rslamiroult/IMG_20150703_132817.jpg (http://s605.photobucket.com/user/rslamiroult/media/IMG_20150703_132817.jpg.html)
http://i605.photobucket.com/albums/tt134/rslamiroult/IMG_20150703_175722.jpg (http://s605.photobucket.com/user/rslamiroult/media/IMG_20150703_175722.jpg.html)
SocomShooter
07-04-15, 10:05
I'll weight in with my G19 RTF2. Not everyone's cup of tea, but it's one of the few handguns I'll never let go of:
http://i38.photobucket.com/albums/e118/agentomega/Car%20Pics/Firearms/21033_516147420297_102600502_30713983_8195638_n.jpg
I had a love/hate relationship with my G36. When it ran well, it was very accurate. But the occasional "hiccup" and FTE led me to never trust it. Traded it off for an XD40 and haven't looked back:
http://i38.photobucket.com/albums/e118/agentomega/Car%20Pics/Firearms/G36S2.jpg
Dawson Sights installed. My favorite sights on earth.
https://c1.staticflickr.com/1/505/19403759272_6d13ca21aa_c.jpg (https://flic.kr/p/vyDkBE) (https://flic.kr/p/vyDkBE) by Austin Scott (https://www.flickr.com/photos/kiowadriver/), on Flickr
Maiden3.16
07-04-15, 11:11
^very nice! Im a huge fa of Dawson sights as well
I'll weight in with my G19 RTF2. Not everyone's cup of tea, but it's one of the few handguns I'll never let go of:
Agreed. Love the RTF2 frame. My G17 (now sans TFOs and replaced with Heinies). It's my go-to Glock.
http://i34.photobucket.com/albums/d135/Talnz167/Cannons/P1257324_zpsmyxxezm8.jpg
And just because... Big Bore/Adco's G21 from the infamous torture test. I put a couple rounds through it... just to say I did.
http://i34.photobucket.com/albums/d135/Talnz167/Cannons/P9020009_zpsgvwxckhj.jpg
https://c1.staticflickr.com/1/433/19227931988_cf077f6455_c.jpg (https://flic.kr/p/vi7bhL)Untitled (https://flic.kr/p/vi7bhL) by Austin Scott (https://www.flickr.com/photos/kiowadriver/), on Flickr
http://i1167.photobucket.com/albums/q629/blak1508/11D9BC5C-75DA-4EBF-BCCA-BC1EF72436D8_zpsoerqijwc.jpg
http://i1167.photobucket.com/albums/q629/blak1508/2D3EDED6-A0EA-4D86-8172-A3F8FEAB70E5_zpsrctam7uj.jpg
willowofwisp
07-05-15, 10:04
I picked up a set of CT grips for the 19 on the really cheap side (110$) so I thought I would give them a try, so far it's working well in place of my GFA.
https://c2.staticflickr.com/4/3808/19441936901_61c2f41336_z.jpg (https://flic.kr/p/vC21uD)IMG_3968 (https://flic.kr/p/vC21uD) by SiDave (https://www.flickr.com/photos/53409939@N06/), on Flickr
texasmarine022003
07-07-15, 14:41
http://i1167.photobucket.com/albums/q624/texasmarine022003/2015-07-07%2014.36.09_zpsnsb2omhg.jpg (http://s1167.photobucket.com/user/texasmarine022003/media/2015-07-07%2014.36.09_zpsnsb2omhg.jpg.html)
Dakota Glock Guy
07-08-15, 10:21
http://i.imgur.com/cRkcRzY.jpg
Does this count?
http://i1195.photobucket.com/albums/aa393/officerfrasher/DF681CAE-C085-4E7D-A064-A2AC5257347E_zpsd1jrabyc.jpg
WickedWillis
07-10-15, 10:52
Does this count?
http://i1195.photobucket.com/albums/aa393/officerfrasher/DF681CAE-C085-4E7D-A064-A2AC5257347E_zpsd1jrabyc.jpg
Congrats man! Very cool.
snakedoctor
07-10-15, 15:12
https://farm1.staticflickr.com/415/19393724310_c42f593312_c.jpg
Digging the dimpled barrel.
Not a great pic, but saw this at my lgs yesterday and had to have it.http://images.tapatalk-cdn.com/15/07/10/a43182e6971d6305be08f50b9cbc94f7.jpg
Sent from my iPhone using Tapatalk
snakedoctor
07-10-15, 19:31
Digging the dimpled barrel.
It's a Zev Tech match barrel. That's actually Frank Proctor's 34, not mine.
My modestly tweaked 43
https://lh3.googleusercontent.com/-JGag8lyVclE/VaFn7KgehxI/AAAAAAAAC1w/wLkvyxUR1LM/s1000-Ic42/G43_1.JPG
https://lh3.googleusercontent.com/-hGuonouC0Ys/VaFn75NTEPI/AAAAAAAAC10/z0ohCfTI2KI/s1000-Ic42/G43_2.JPG
infidel4life11
07-13-15, 11:06
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_76.jpg
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_75.jpg
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_74.jpg
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_73.jpg
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_72.jpg
infidel4life11
07-13-15, 14:51
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_69.jpg
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_68.jpg
WickedWillis
07-13-15, 15:27
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_69.jpg
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_68.jpg
So...much...stippling...
infidel4life11
07-13-15, 19:00
So...much...stippling...
Actually only two are stippled, the others are silicon carbide! But yes a lot of work done there
MiamiCracker
07-14-15, 12:36
G21 Gen 4:
-Ameriglo Pro I Dots
-Ghost Connector and Springshttp://images.tapatalk-cdn.com/15/07/14/5fcfab0754698186b5e3b7821a5d241d.jpg
Sent from my iPhone using Tapatalk
Fordtough25
07-15-15, 04:22
G21 Gen 4:
-Ameriglo Pro I Dots
-Ghost Connector and Springshttp://images.tapatalk-cdn.com/15/07/14/5fcfab0754698186b5e3b7821a5d241d.jpg
Sent from my iPhone using Tapatalk
Very nice, I love how the Gen 4 shoots. My SF isn't bad but the new models rock!
http://i605.photobucket.com/albums/tt134/rslamiroult/IMG_20150716_180602.jpg (http://s605.photobucket.com/user/rslamiroult/media/IMG_20150716_180602.jpg.html)
infidel4life11
07-17-15, 09:08
http://i605.photobucket.com/albums/tt134/rslamiroult/IMG_20150716_180602.jpg (http://s605.photobucket.com/user/rslamiroult/media/IMG_20150716_180602.jpg.html)
I love a gun that looks like its been shot and used!
http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/Glock%2021/IMG_0802%20Glock%2021%20Left%20Side%20Size%201536_zpspfdmavy8.jpg~original
http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/Glock%2021/IMG_0797%20Glock%2021%20Right%20Side%20Size%201536_zpsydc1gxwr.jpg~original
http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/Glock%2021/IMG_0800%20Glock%2021%20Sights%20Size%201536_zpsgkpk7cag.jpg~original
My modestly tweaked 43
https://lh3.googleusercontent.com/-JGag8lyVclE/VaFn7KgehxI/AAAAAAAAC1w/wLkvyxUR1LM/s1000-Ic42/G43_1.JPG
https://lh3.googleusercontent.com/-hGuonouC0Ys/VaFn75NTEPI/AAAAAAAAC10/z0ohCfTI2KI/s1000-Ic42/G43_2.JPG
What holster is that?
http://i.imgur.com/efq8FKu.jpg
lateralus180
07-17-15, 19:27
The new lipsey's gray frame Glock 20 with Inforce APL light, and the limited lipsey's FDE Glock 42. The gray frame looks a little less blue in person, but does have a blueish tint. Marketed as a gray though.
https://lh3.googleusercontent.com/akmX4qiwa0_hxyGZFYZpYVGuuBefxJvPaQwadWyv2bQ=w1509-h944-no
My camera shy Gen2.5 G30
https://lh3.googleusercontent.com/-ERCzWk9PrgI/VamrdgPIThI/AAAAAAAAC2c/dFsWvCWwvMA/s1000-Ic42/DSC_0039.JPG
Linkscoach
07-17-15, 22:10
The 30 is my favorite Glock. I didn't even know there was a Gen 2.5.
Panhandle461
07-19-15, 20:46
Tagged
Dakota Glock Guy
07-20-15, 21:30
http://i.imgur.com/LKwPmvJ.jpg
infidel4life11
07-21-15, 13:44
Just a boring, used but unfired, 19.4. Don't know what I'm going to do to this one yet......
http://i1226.photobucket.com/albums/ee413/infidel4life11/Mobile%20Uploads/image_82.jpg
http://i.imgur.com/LKwPmvJ.jpg
A+A+A+A+A+A+A+
Whenever I refill my gun$$ piggy bank.....I will be contacting you!
http://i.imgur.com/LKwPmvJ.jpg
How dare you do this while I'm saving for a new car. I guess I'll have to sell more.
http://i.imgur.com/Htu8t6a.jpg
Maiden3.16
07-30-15, 18:34
G41 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpszcwii8mq.jpg (http://s1382.photobucket.com/user/Maiden316/media/Mobile%20Uploads/image_zpszcwii8mq.jpg.html)
Maiden3.16
07-30-15, 18:50
http://i.imgur.com/Htu8t6a.jpg
I really dig those rtf2 glocks
G41
https://farm1.staticflickr.com/311/19951393528_3e1830547f_b.jpg (https://flic.kr/p/wp37cA)Topton range photos 575 (https://flic.kr/p/wp37cA) by Cory Fluck (https://www.flickr.com/photos/101418915@N07/), on Flickr
G41 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpszcwii8mq.jpg (http://s1382.photobucket.com/user/Maiden316/media/Mobile%20Uploads/image_zpszcwii8mq.jpg.html)
Nice. Who did the frame work?
Maiden3.16
07-30-15, 23:07
^thanks! I did te framework
jeremycase00
07-30-15, 23:15
^thanks! I did te framework
Very nice. Gotta ask though, what's the trick to getting the trigger guard under cut so smooth?
Sent from my SM-G920V using Tapatalk
Anyone got a rtf2 17 they want to sell me? Lol
34442
Glock 34, trijicon 3.25 moa rmr, streamlight tlr1-HL
Maiden3.16
08-01-15, 01:29
Very nice. Gotta ask though, what's the trick to getting the trigger guard under cut so smooth?
Sent from my SM-G920V using Tapatalk
Thanks! No secrets really on getting the trigger guard smooth. Just sanding until it's smooth and polishing after. Some guys can get it to a mirror like finish which I haven't quite figured out yet though.
Dig it. Spyderco model?
Spyderco tuff.
jeremycase00
08-01-15, 01:35
Thanks! No secrets really on getting the trigger guard smooth. Just sanding until it's smooth and polishing after. Some guys can get it to a mirror like finish which I haven't quite figured out yet though.
I know I've seen pics like that. Thanks, I gotta do the under cut on my 17 this weekend.
Sent from my SM-G920V using Tapatalk
Maiden3.16
08-01-15, 13:59
I know I've seen pics like that. Thanks, I gotta do the under cut on my 17 this weekend.
Sent from my SM-G920V using Tapatalk
Good luck, go slow
Maiden3.16
08-01-15, 14:00
Drinking the kool-aid... Just finished this little guy up. This thing is tiny!
http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpsdvmdj25i.jpg (http://s1382.photobucket.com/user/Maiden316/media/Mobile%20Uploads/image_zpsdvmdj25i.jpg.html)
Edit: not sure what glock did different but the magazines really eject nicely from the gun compared to just falling out like other models. I like it.
https://farm1.staticflickr.com/549/20144273156_6e36906785_b.jpg (https://flic.kr/p/wG5EAq)SD8A6173-Edit.jpg (https://flic.kr/p/wG5EAq) by Dsully (https://www.flickr.com/photos/clicksully/), on Flickr
I've wondered why more companies don't offer serrated inserts for the RMR cutouts. Seems like an obvious thing to do.
I've wondered why more companies don't offer serrated inserts for the RMR cutouts. Seems like an obvious thing to do.
Shit, just grab the rmr and let her rip
Shit, just grab the rmr and let her rip
True. My thinking is that for some folks who aren't running an RMR its more advantageous to have a slide milled for one and running a serrated plate that can be swapped for an RMR if desired later instead of having it milled twice. Idk. Made sense in my head.
True. My thinking is that for some folks who aren't running an RMR its more advantageous to have a slide milled for one and running a serrated plate that can be swapped for an RMR if desired later instead of having it milled twice. Idk. Made sense in my head.
I don't see anything wrong with the serrations either way.
Anyone got a rtf2 17 they want to sell me? Lol
More than half of my desire for a Vickers Glock is the RTF frame.
Guy was trying to sell an RTF locally.... Dumbass tried to "lighten" the slide by crookedly dremeling windows in it, and he stippled over most of the frame, because.....? Of course $700 for a "rare custom" Glock. F'ing moron.
Rattlehead
08-02-15, 02:15
https://farm1.staticflickr.com/533/20032220540_f0b64cf55a_b.jpg
fearsomekittens
08-02-15, 18:13
G27 carry gun with dura coat combat gray slide, truglo sights, Supreme Power trigger (stone polished). http://images.tapatalk-cdn.com/15/08/02/d65043ae42712d8223eefcf210b2471a.jpg
Sent from my iPhone using Tapatalk
http://images.tapatalk-cdn.com/15/08/04/dee95faff25afbd8252e721d411dc7c0.jpg
Sent from my SM-G900V using Tapatalk
Appalachian
08-04-15, 17:21
True. My thinking is that for some folks who aren't running an RMR its more advantageous to have a slide milled for one and running a serrated plate that can be swapped for an RMR if desired later instead of having it milled twice. Idk. Made sense in my head.
Doug at ATEi had us send in the RMRs along with the guns for milling. He said each RMR can fit a little different, not a "universal fit". With that knowledge I would say that any machining ought to wait until the RMR that goes with it is in hand. Not my area of expertise, but it damn sure is his.
http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/FullSizeRender_zps5724adca.jpg
Rattlehead
08-07-15, 00:19
https://farm1.staticflickr.com/356/20190759466_5382337308_b.jpg
https://farm1.staticflickr.com/298/20061547139_6dd73abda0_b.jpg
EPP Lock Back sight.
(shameless self-promotion)
4DAIVI PAI2K5
08-07-15, 06:25
https://farm1.staticflickr.com/356/20190759466_5382337308_b.jpg
https://farm1.staticflickr.com/298/20061547139_6dd73abda0_b.jpg
EPP Lock Back sight.
(shameless self-promotion)
Looks good dude!
Are they for sale or just for your personal use?
*edit I'm still not 100% awake and typed like a zombie.
Rattlehead
08-07-15, 14:18
Looks good dude!
Are they for sale or just for your personal use?
*edit I'm still not 100% awake and typed like a zombie.
:cool: Currently available.
Looking great!
Thanks!
Not to get too far from topic, pic thread -
https://farm6.staticflickr.com/5574/18914532495_8b6260a6c7_c.jpg
The 43 in a pocket dump pic from a relatively recent post-work range therapy trip with a buddy...
https://farm4.staticflickr.com/3783/18872044042_43b55ddde7_c.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.