PDA

View Full Version : The Official GLOCK Picture Thread



Pages : [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

M4arc
07-13-06, 19:33
I figure it's about time we started a GLOCK picture thread.

Here's my first entry, I'll get more up later:
http://i235.photobucket.com/albums/ee64/oclvtrek/g19proL.jpg

RHR
07-13-06, 20:01
My G19...

http://img116.imageshack.us/img116/9915/dscn04302rf.jpg

http://img116.imageshack.us/img116/7477/dscn04332hr.jpg

dubb-1
07-13-06, 20:34
A glock picture thread. That's funny.

VA_Dinger
07-13-06, 20:53
I have been waiting for M4arc to start this thread. It's his revenge for all the 1911 threads.

:D

What the hell, I love Glocks.

My G19:

http://img.photobucket.com/albums/v74/va_dinger/2004_0117Glock190001.jpg

I used to be able to post a picture of my G34, BUT Chris "The Flasher" weaseled it out of me. It's only a matter of time & money until I buy another one.

bigbore
07-13-06, 21:16
http://www.adcofirearms.com/glock/impact.jpg

BravoCompanyUSA
07-13-06, 21:23
http://www.adcofirearms.com/glock/impact.jpg

What am I lookin' at Steve ?

bigbore
07-13-06, 22:06
Glock 21 POI after being tossed from 500' at 100 MPH. :D

BravoCompanyUSA
07-13-06, 22:17
Glock 21 POI after being tossed from 500' at 100 MPH. :D

Bad day at the office ?







.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . .;)

Marler5811
07-13-06, 22:29
What the hell...here's mine

http://i21.photobucket.com/albums/b281/marler5811/PicsfromCompaq552.jpg

Glock 21 & Glock 17

dubb-1
07-14-06, 12:53
http://72.240.4.86/images/muddyglock.JPG
http://72.240.4.86/images/waterglock.JPG

USMC
07-14-06, 14:23
http://img.photobucket.com/albums/v602/USMC/Complete/BGlock23-1.jpg

http://img.photobucket.com/albums/v602/USMC/Complete/BGlock27-1.jpg

USMC
07-15-06, 11:23
http://img.photobucket.com/albums/v602/USMC/Complete/Glock212.jpg

Sam
07-16-06, 12:22
The picture may not show all the finish wear at the front of the slide, it's basically shiny white there. I installed Heinie's Straight 8 sights, butt plug and an extended mag release (dehorned and trimmed). Otherwise, it's stock with probably less than 10000 rounds through it.

http://img.photobucket.com/albums/v481/RichardTouch/G19002.jpg

subzero
07-16-06, 18:19
Wow. Either mine is too dirty, or most of y'alls are far too clean.

I'm waiting for the stereotypical "I love Glock" pic where the author shows his devotion through magazines.

KevinB
07-16-06, 19:37
http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/GUYS001.jpg

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/RAIDPACK007.jpg

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/Kevin044.jpg

M4arc
07-16-06, 20:02
Kevin - I know at one time you were issued a G17 so in comparison how do you like the G19?

KevinB
07-16-06, 20:28
I realy prefer the 19 -- it was an accident that we got 17's -- for some reason some bright light at DOS ordered the wrong p/n and got G17's without night sights -- instead of G19's with.

So we where stuck with the 17's for a few months until DOS rectified it and bought new 19's -- then they forbid using the 17's :rolleyes: since they are not certified :rolleyes:

I shoot the 19 a lot better -- but I find it assinine that you can use a pistol for four months then all of a sudden it is not acceptable.

BravoCompanyUSA
07-16-06, 21:43
Kevin,
Why do you prefer the 19 over the 17 ?

M4arc
07-17-06, 08:46
Kevin,
Why do you prefer the 19 over the 17 ?

Obviously I'm not Kevin but I shoot better with and prefer my G19 over my G17. I believe USMC03 stated on Grant's forum that the grip angle of the G19 & G34 is slightly different that that of the G17. I don't know for sure but I am much more controlled and accurate with my G19. So much so I have considered selling my G17 to fund another 19 purchase.

KevinB
07-17-06, 11:12
I honestly dont know -- I have two personal 19's so there is that...
But I find that I can get a better grip with the damn thing -- and for whatever reaons I am more accurate with the shorter barrel and sight radius.

I would bet that Jeff/USMC03 is correct...

HotRod9mm
07-20-06, 18:06
Here is a G23 that I refinished the slide.
http://img.photobucket.com/albums/v79/hotrod9mm/Slide-Refinish.jpg

M4arc
07-20-06, 18:25
Here is a G23 that I refinished the slide.
http://img.photobucket.com/albums/v79/hotrod9mm/Slide-Refinish.jpg

Sweet!

Glad you could join us :)

LOKNLOD
07-20-06, 21:14
My 17:
http://home.off-road.com/~loknlod/G17.jpg

My wife's 17:
http://home.off-road.com/~loknlod/laceysgun.jpg

SIMPLYDYNAMIC
07-21-06, 20:10
Quote by KeveinB : I realy prefer the 19 -- it was an accident that we got 17's -- for some reason some bright light at DOS ordered the wrong p/n and got G17's without night sights -- instead of G19's with.

So we where stuck with the 17's for a few months until DOS rectified it and bought new 19's -- then they forbid using the 17's since they are not certified

I shoot the 19 a lot better -- but I find it assinine that you can use a pistol for four months then all of a sudden it is not acceptable.______________________________________________________________

That's funny I am completly opposite.... I Rememeber when we had to switch over to the 19's, the 17 just had a better feel to it... might be from all the compition shooting to...
http://i3.photobucket.com/albums/y65/simplydynamic/SDIGLOCK17.jpg

HotRod9mm
07-21-06, 20:17
My G38...
http://img.photobucket.com/albums/v79/hotrod9mm/G38-small.jpg

DBautista
07-22-06, 13:11
I posted one my 1911 lady friends in the 1911 thread, now its time to post two of the Glock sisters that like to get used and abused.

Glock 19 and Glock 26, dirty whores love to be in my pants, are not picky on what they eat, and dont' bitch about not getting clean...

They love Wolf when they are outside plinking, but they really like it when they have Speer 115 gr +P+ GDHP in their stomachs and in my pants.

The 26 is my daily carry with 115 +P+ GDHPs. Also waiting on Javis (slow bastards) for a threaded barrel for the 26 so she can speak softly with my EVO-9.

http://members.cox.net/dbautista4/Glocks.jpg

baffle Stack
07-30-06, 18:30
Is it me or do the last 2 pics show a more aggressively beveled muzzle area on the 38 and the 26? My 19 is not beveled nearly that much., it’s more rounded then beveled.

dubb-1
07-30-06, 23:44
That's how the subcompacts are.

matt7184
08-01-06, 13:44
Some pics of my OD G19 from my camera phone:

http://img513.imageshack.us/img513/303/0801061422qv0.jpg

http://img513.imageshack.us/img513/7637/0801061425yn4.jpg

http://img513.imageshack.us/img513/8412/0801061429afk5.jpg

http://img513.imageshack.us/img513/6488/0801061430oy2.jpg

USMC03
08-02-06, 13:53
How did I miss this thread?

Over the last 15 years, I've owned handguns from Sig, S&W, Les Baer, Colt, Kimber, H&K, Beretta, and several others.

I found that Glock's fit *me* best.

Sold off everything else and now own nothing but Glock 9mm's. From a training stand point and logistically it makes life so much easier (ammo, holsters, mags, etc)

http://www.coloradoshooting.org/usmc03%206glocks%20sized.jpg

Stickman
08-05-06, 13:46
G19 for most offduty carry, as well as BUG when working certain activities.

http://www.airforcesecuritypolice.com/invisionboard/uploads/post-3-1111372986.jpg

militarymoron
08-08-06, 20:41
http://img.photobucket.com/albums/v483/militarymoron/sm_paintg19.jpg

zombie
08-17-06, 13:58
http://pic20.picturetrail.com/VOL85/1295899/6901732/130421876.jpg


22, 17, and 23

Cameron
08-17-06, 20:30
I have a 19 and a 26... I just never thought they were pretty enough to take pictures of...


Cameron

Harv
09-01-06, 21:17
http://img.photobucket.com/albums/v494/harv24/IMG_0425.jpg

My trusty G17. This and the 1911 are the only two hand guns I own (Minus a .22 Buckmark and a .22 pistol

Got_Guns
09-12-06, 19:01
G17, G19, G22, G23C, G27

http://img.photobucket.com/albums/v230/got_guns/MyGlocks.jpg

M4arc
09-20-06, 19:43
G19 for most offduty carry, as well as BUG when working certain activities.

http://www.airforcesecuritypolice.com/invisionboard/uploads/post-3-1111372986.jpg

Great picture!

Bonk2029
09-20-06, 21:47
My city-issued 2nd generation G22, been on my hip daily for eight years now.

http://i39.photobucket.com/albums/e151/Bonk2029/glock1.jpg

http://i39.photobucket.com/albums/e151/Bonk2029/glock2.jpg

Voodoochild
09-25-06, 10:03
I realy prefer the 19 -- it was an accident that we got 17's -- for some reason some bright light at DOS ordered the wrong p/n and got G17's without night sights -- instead of G19's with.

So we where stuck with the 17's for a few months until DOS rectified it and bought new 19's -- then they forbid using the 17's :rolleyes: since they are not certified :rolleyes:

I shoot the 19 a lot better -- but I find it assinine that you can use a pistol for four months then all of a sudden it is not acceptable.

What do you expect it is the Government after all. Nothing is what it seems.

nickdrak
09-30-06, 15:47
My G23:
http://i10.tinypic.com/353cg3q.jpg

strycnine
10-04-06, 10:22
G19
http://i42.photobucket.com/albums/e333/strycnine/ccw.jpg

M4arc
10-04-06, 10:38
G19
http://i42.photobucket.com/albums/e333/strycnine/ccw.jpg

How do you like the 124gr Hornadys? I have several boxes sitting in the safe but I haven't tried them yet.

strycnine
10-04-06, 11:17
How do you like the 124gr Hornadys? I have several boxes sitting in the safe but I haven't tried them yet.
I shot a magfull yesterday and they seem to be ok.What do you currently carry for CCW ammo?

fivepointoh
10-04-06, 14:52
My G17 Krylon'd Frame w/ P111D Surefire and soon to be sporting TFO's (waiting on those to show up in the mail :D.

http://photos-303.ak.facebook.com/ip002/v47/122/43/30404315/n30404315_31059303_7384.jpg
http://photos-305.ak.facebook.com/ip002/v47/122/43/30404315/n30404315_31059305_8103.jpg



minus the SF P111

http://photos-075.ak.facebook.com/ip002/v46/122/43/30404315/n30404315_30974075_5632.jpg
http://photos-753.ak.facebook.com/ip006/v41/122/43/30404315/n30404315_30939753_8255.jpg
http://photos-756.ak.facebook.com/ip006/v41/122/43/30404315/n30404315_30939756_9975.jpg

COSteve
10-06-06, 11:05
http://img.photobucket.com/albums/v726/Coloradoglocker/Happy2006.jpg

M4arc
10-06-06, 12:17
I shot a magfull yesterday and they seem to be ok.What do you currently carry for CCW ammo?

Winchester SXT 147gr

SOPMOOD
11-06-06, 19:01
<Bump>

SOPMOOD
11-06-06, 19:01
My workhorse, G19, captured front spring/guide rod, extended mag release and slide catch, Meprolight TruDot Tritium sights, elastomer slide bumper, Streamlight TLR-1 Tactical Light (80+ LUMENS from an L.E.D!)
I have had almost every popular brand of pistol, nothing compares to the Glock!

http://i119.photobucket.com/albums/o135/jnortham/IMG_0146.jpg


http://i119.photobucket.com/albums/o135/jnortham/IMG_0142.jpg


http://i119.photobucket.com/albums/o135/jnortham/IMG_0147.jpg

SOPMOOD
11-06-06, 19:10
Glock 19 and Glock 26, dirty whores love to be in my pants, are not picky on what they eat, and dont' bitch about not getting clean...
Amen, my 19 gets a presidental cleaning.....every 4 years. ;)

Glockster35
11-10-06, 18:52
My Glocks. A Model 23, in .40 S&W, originally purchased used in 1994. The larger one is the Model 35, in .40 S&W, orignally purchased new in 1999.

I have done a lot of work on the 35, and just recently added the Ralph Sotelo (www.triggerkit.com) trigger kit. I must say, it is by far the best money I have spent on Glock parts EVER!

http://www.myfilehut.com/userfiles/218228/Firearms/Glock23-35.JPG

I used to use the 35 in USPSA (IPSC) shooting several years back. It was used specifically in the Limited Class, prior to the onslaught of the Limited-10 Class! Now it's just a fun pistol for me to shoot!

toemag
11-11-06, 07:52
Sorry, but my pic's didnt show...

Tony

Glockster35
11-11-06, 08:30
Fixed now!

Neville
11-11-06, 11:46
really like the AGrip
http://img.photobucket.com/albums/v222/CatoY2k/AGrip.jpg
http://img.photobucket.com/albums/v222/CatoY2k/AGripII.jpg

SOPMOOD
11-11-06, 12:33
Obviously I'm not Kevin but I shoot better with and prefer my G19 over my G17. I believe USMC03 stated on Grant's forum that the grip angle of the G19 & G34 is slightly different that that of the G17. I don't know for sure but I am much more controlled and accurate with my G19. So much so I have considered selling my G17 to fund another 19 purchase.
I prefer the G19 over the 17 as well. Had one, it felt too big for some reason. The G19 fits me perfectly.

Bugaboo
11-15-06, 14:06
really like the AGrip
http://img.photobucket.com/albums/v222/CatoY2k/AGrip.jpg
http://img.photobucket.com/albums/v222/CatoY2k/AGripII.jpg

Doeasn't this grip make the mag release hard?

Here is my G19 with enlarged mag release button
http://i14.photobucket.com/albums/a330/Bugaboo_Cz/GLOCK/100_0737.jpg

Neville
11-16-06, 01:48
I don't find it much harder to press since the material is very flexible, but one can cut around the mag release if it bothers.

SOPMOOD
11-25-06, 18:54
A glock picture thread. That's funny.
I am sorry, what is "funny" about a Glock picture thread?

Robb Jensen
11-25-06, 20:28
I am sorry, what is "funny" about a Glock picture thread?

I agree with you SOPMOOD....If you can't shoot a Glock well, then you just can't shoot. :D

bullitt5172
12-01-06, 18:27
I am sorry, what is "funny" about a Glock picture thread?

Maybe because for the most part they all look the same ;)

Here is the G24 and G17 that I have since sold and replaced them with a G35 and G23 (no pics yet).

http://i98.photobucket.com/albums/l274/bglimpse/G24.jpg
http://i98.photobucket.com/albums/l274/bglimpse/IMG_0010.jpg

HotRod9mm
12-03-06, 13:54
My G35 hanging out with a couple of friends

http://img.photobucket.com/albums/v79/hotrod9mm/Black-Weapons.jpg

:cool:

DamnYank!
12-03-06, 20:50
here's my fairly new G19. put about 200rds through it before adding a TruGrip, THE captured guide rod (having issues with it), and Warren Tactical sights. Also relieved the trigger guard a bit and put on a clip draw. extended mag and slide releases will be on soon. at that point the only money thrown at her will be for ammo and range time :D

http://home.comcast.net/~djyankey/images/firearms/DSC00459.JPG


http://home.comcast.net/~djyankey/images/firearms/DSC00461.JPG

55Kingpin
12-06-06, 19:00
Those Sevigny carry sights are dead sexy. I hope Santa brings me a set.....

This is the pistol I picked up through the GSSF special.

http://img482.imageshack.us/img482/6097/img0742so0.th.jpg (http://img482.imageshack.us/my.php?image=img0742so0.jpg)

Hi-Res

http://img49.imageshack.us/img49/2619/img0742gx5.th.jpg (http://img49.imageshack.us/my.php?image=img0742gx5.jpg)

DamnYank!
12-08-06, 17:36
Those Sevigny carry sights are dead sexy. I hope Santa brings me a set.....


ya, a friend got them first and i REALLY liked them, made the glock sight up for me so much better than with stock sights that i bought one (and then the sights)!

i highly recommend them!

55Kingpin
12-08-06, 17:42
ya, a friend got them first and i REALLY liked them, made the glock sight up for me so much better than with stock sights that i bought one (and then the sights)!

i highly recommend them!

Yep, the stock Glock sights are horrible. Sights, a slug plug, and mags are all I need for a Glock.

http://img146.imageshack.us/img146/5169/img0743sz2.th.jpg (http://img146.imageshack.us/my.php?image=img0743sz2.jpg)

It is a pic thread after all.

.45_chef
12-12-06, 19:23
Just took a pic of Snacks' G22.....

http://i32.photobucket.com/albums/d29/dhindo/REAL%20STEEL/DSC03797.jpg
http://i32.photobucket.com/albums/d29/dhindo/REAL%20STEEL/DSC03800.jpg

snacks
12-14-06, 21:42
wow that pistol looks awfully familiar.:D

LOKNLOD
12-17-06, 16:52
http://home.off-road.com/~loknlod/G17TLR1.jpg

Yojimbo
12-20-06, 08:07
My Glock 30...:cool:

http://www.huntingpictures.net/data/560/95PC230003a.JPG

John Fettes
01-12-07, 19:38
... relieved the trigger guard a bit ...

It looks like you moved the cut-out on the trigger guard for the high front strap forward a little. Mine hits my knuckle in a bad spot. The 9mm's aren't too bad, the 357SIG batters it more.

Wolf Spyder
01-18-07, 18:04
Here is mine. Glock 20, 10mm.

http://img.photobucket.com/albums/v378/Wolf_Spyder/Img_3902Resize.jpg

http://img.photobucket.com/albums/v378/Wolf_Spyder/30rnd10mmsmall.jpg

http://img.photobucket.com/albums/v378/Wolf_Spyder/30rnd10mmcropped.jpg

I did the grip work myself.

M4arc
01-18-07, 18:15
Great job Wolf Spyder and welcome to the forum!

Good photos too :)

SuicideHz
01-18-07, 18:58
It looks like you moved the cut-out on the trigger guard for the high front strap forward a little. Mine hits my knuckle in a bad spot. The 9mm's aren't too bad, the 357SIG batters it more.

No he didn't. I did! :D

He did sand it down after I was done to make it prettier...

Wolf Spyder
01-20-07, 16:05
Great job Wolf Spyder and welcome to the forum!

Good photos too :)



Thanks.

HotRod9mm
01-20-07, 21:43
My latest acquisition that I just picked up today. Sorry for the poor pic.
http://img.photobucket.com/albums/v79/hotrod9mm/G17L-1gen.jpg

M4arc
01-21-07, 06:12
That is really cool HotRod9mm! :cool:

Where do you find all this neat stuff?

adh
01-24-07, 20:59
http://www.hunt101.com/img/399547.jpg (http://www.hunt101.com/?p=399547&c=500&z=1)

HotRod9mm
02-10-07, 01:33
That is really cool HotRod9mm! :cool:

Where do you find all this neat stuff?


I found the G17L at one of the online auctions. I noticed the seller had a local number so I called, told them I'd take it if they closed the auction(no bids), then went and picked it up.

:cool:

ArJunaBug
02-27-07, 01:29
My GLOCK Collection.

26, 26, 19, 17, 21

http://img227.imageshack.us/img227/4217/kh9o6386copy1024x757ds8.jpg

Glockster35
02-27-07, 06:19
Impressive collection.

Thoughts on the Crimson Trace grips?

Frens
03-11-07, 15:19
G17 kryloned OD

http://img98.imageshack.us/img98/4548/hpim3118io4.jpg

graffex
03-11-07, 16:05
How did you paint your frame? I'm instrested because I couldnt find a colored G17 locally so I had to get black but I'd really like to get the whole gun done in one color such as Flat Dark Earth.

Frens
03-11-07, 17:11
I've simply degreased everything before panting. But krylon is not a permanent paint...it'll wear off easily.

graffex
03-11-07, 19:06
I was looking online and DuraCoat seems to be the ticket. Might send my G17 away to larsontactical (www.larsontactical.com) and get it all done up in a camo pattern or all solid in a green or desert color.



http://i40.photobucket.com/albums/e241/rmdugan84/g172.jpg

AMMOTECH
03-12-07, 14:43
need to update my pics....

55Kingpin
03-12-07, 19:37
G17 kryloned OD

http://img98.imageshack.us/img98/4548/hpim3118io4.jpg

Hmmm...... 9x21???

AMMOTECH
03-12-07, 19:44
Hmmm...... 9x21???


European 9MM for non-military types.

In some places you can't shoot what the military shoots.

Frens
03-13-07, 05:49
European 9MM for non-military types.

In some places you can't shoot what the military shoots.


you're right

In Italy only LEO and .Mil can use 9x19 :mad:

few years ago a lot of calibers were banned: 45ACP, 30-06, .308, .223,... that's why it's not strange to find military guns like garands,1911s,AR15s,etc chambered for 45HP, .270, .222
:rolleyes:

today 9x19 is the only caliber banned for civilian use

M4arc
03-17-07, 05:38
G17 kryloned OD

http://img98.imageshack.us/img98/4548/hpim3118io4.jpg

Frens!

It's great to see you here!

Frens
03-18-07, 16:24
Thanks M4arc! :D

graffex
03-18-07, 17:31
you're right

In Italy only LEO and .Mil can use 9x19 :mad:

few years ago a lot of calibers were banned: 45ACP, 30-06, .308, .223,... that's why it's not strange to find military guns like garands,1911s,AR15s,etc chambered for 45HP, .270, .222
:rolleyes:

today 9x19 is the only caliber banned for civilian use

That is the most retarded thing I have ever heard. What is there logic behind it?

I'm glad I live in America. Couldn't imagine not being able to own a 30-06. Sorry you have to live in a oppressive country.

Frens
03-18-07, 18:01
I should edit my last post...sorry my fault :(

"...till few years ago a lot of calibers were banned: 45ACP, 30-06, .308, .223,... that's why it's not strange to find military guns like garands,1911s,AR15s,etc chambered for 45HP, .270, .222 ..."

the only caliber still banned is 9x19...everything else is ok to own....

M4arc
03-18-07, 18:34
That is the most retarded thing I have ever heard. What is there logic behind it?

I'm glad I live in America. Couldn't imagine not being able to own a 30-06. Sorry you have to live in a oppressive country.

A lot of countries are like that. And don't think it couldn't happen here someday...

Frens, is it hard for you to find 9x21 ammo and magazines?

SuicideHz
03-18-07, 19:01
It makes sense to word a law that way- that is, if you want a stupid law in the first place. Wording it to say that you can't own "any military calibers" is requiring three words versus a whole list of calibers where you might leave one off.

It also probably keeps people from wanting the military's weapons like we do!

Frens
03-18-07, 19:18
A lot of countries are like that. And don't think it couldn't happen here someday...

Frens, is it hard for you to find 9x21 ammo and magazines?

no it isn't.
mags are the same, only chambers and rollmarks are different; and 9x21 is easy as .22lr to find...no problem at all, 99.9% of the manufacturers offer this caliber (winchester, fiocchi, IMI, etc)

M4arc
03-18-07, 19:23
no it isn't.
mags are the same, only chambers and rollmarks are different; and 9x21 is easy as .22lr to find...no problem at all, 99.9% of the manufacturers offer this caliber (winchester, fiocchi, IMI, etc)

That's good to hear. I know one thing, you won't be subjected to the same BS we are here in the States. The price of 9x19 has soared recently because the military is using it up apparently. I just paid $16 per 100 at Wal-Mart yesterday :mad: That's $5 more than it was a year ago!

SuicideHz
03-18-07, 19:24
it went from $11.88 to $15.94 sometime late January early February. $21.88 per 100 rounds of WWB 45 went up to $27.95.

Frens
03-18-07, 19:50
omg! :eek:


ammo are pricey here but prices didn't change due to OEF and OIF.

4€ per 20 rounds Wolf .223 62gr
9€ per 20 rounds AE .223 62gr (considered nice cheap ammo)
22€ per 25 rounds Hornady .223 75gr

20€ per 50 rounds .45ACP Magtech

15€ per 50 round 9x21 cheap ammo made in easter europe (don't remeněmber the manufacturer)

sjauch
03-21-07, 21:46
:p

Sig is better
http://img.photobucket.com/albums/v482/sjauch/Pat%20Rogers%20Class/Sig226worked_LRG.jpg

WillC
03-22-07, 09:40
That's good to hear. I know one thing, you won't be subjected to the same BS we are here in the States. The price of 9x19 has soared recently because the military is using it up apparently. I just paid $16 per 100 at Wal-Mart yesterday :mad: That's $5 more than it was a year ago!

Hell yeah we are!! :D

M4arc
03-22-07, 21:38
Hell yeah we are!! :D

I don't have a problem with it as long as you are putting them to good use ;) :D

David Thomas
03-26-07, 22:10
My 9mm GLOCKs

http://i81.photobucket.com/albums/j236/peachesndiesel/GLOCKmarch2007022.jpg

John Fettes
03-26-07, 22:17
How do you feel about the 34 vs. the 17L?

I had a 24 and thought that it was a little muzzle heavy.

John

PS I think that the 9mm's are the best Glocks!

David Thomas
03-26-07, 22:57
How do you feel about the 34 vs. the 17L?

I had a 24 and thought that it was a little muzzle heavy.

John

PS I think that the 9mm's are the best Glocks!

Tough question. However, I have to say that I like the 17L better, but the G34 is no slouch.
The added velocity of the longer 17L is a nice bonus also. Both are great pistols.


A brace of 34's:
http://img.photobucket.com/albums/v441/DavidThomas/pistolas45andG34s2005_0325008.jpg

John Fettes
03-27-07, 04:30
Glocks & SureFires, hard to beat!

John

Leonidas
04-15-07, 22:15
http://www.seijin.smugmug.com/photos/50640436-O.jpg

John Fettes
04-15-07, 22:49
http://www.airforcesecuritypolice.com/invisionboard/uploads/post-3-1111372986.jpg

Excellent medal

John

HARDONEM
04-18-07, 11:29
I went with the G22. Big GRIN:D

http://img186.imageshack.us/img186/7896/1stglock007mx5.jpg

http://img410.imageshack.us/img410/8332/1stglock013jw5.jpg

http://img179.imageshack.us/img179/9433/1stglock016ig5.jpg

http://img410.imageshack.us/img410/1208/1stglock022bo5.jpg

Not_A_Llama
04-21-07, 04:02
Just got my G19 from CDNN.. minty-fresh for $400!

http://www.subpar.info/photos/glock/IMG_3912halfflatdesat.jpg

Now all I need is a holster... and light.. and lanyard... and 3.5 connector... and... it's BRD all over again.

SuicideHz
04-21-07, 10:04
Does it have a booboo or sprained joint under that gauze?

Not_A_Llama
04-21-07, 14:57
It's an ACE bandage!
Buffers my delicate hands against the checkering in the grooves.

HARDONEM
04-21-07, 17:14
It's an ACE bandage!
Buffers my delicate hands against the checkering in the grooves.

:confused:
Think you better steer away from G20s

Just Kidding...

SuicideHz
04-21-07, 17:23
Maybe he should get a .22 kit so he can get rid of the Bandage.

:D

Matt Edwards
04-21-07, 17:36
Hard,
I didn't know they issued G22s in the 18th ABN CORP. Good on ya!;)

Matt

HARDONEM
04-21-07, 21:14
LOL, I wish. Just making a conversation photo. Army's still stuck in Homer mode when it comes to weaponry.

David Thomas
04-22-07, 16:20
GLOCK 21 and GLOCK 30

http://img.photobucket.com/albums/v441/DavidThomas/Glockpackage006.jpg


GLOCK 17 and GLOCK19

http://img.photobucket.com/albums/v441/DavidThomas/Glockpackage012.jpg

shark31
04-25-07, 09:07
G21:
http://i92.photobucket.com/albums/l2/shark3-1/prodigy021.jpg
G36:
http://i92.photobucket.com/albums/l2/shark3-1/G36002.jpg

John_Wayne777
04-25-07, 10:07
Glocks are ugly......:eek:

http://i2.photobucket.com/albums/y16/jwayne_777/backups.jpg?t=1177513136

http://i2.photobucket.com/albums/y16/jwayne_777/IMGP0040.jpg?t=1177513219

http://i2.photobucket.com/albums/y16/jwayne_777/IMGP0043.jpg?t=1177513259

Personally I don't understand the fascination with them.

-Wes-
04-26-07, 14:14
G-17 with factory night sights, only mod...a little square of grip tape on the slide.

http://img138.imageshack.us/img138/6438/hpim2159croppedzx7.jpg

HARDONEM
05-13-07, 11:13
http://img523.imageshack.us/img523/8823/nfyre001as8.jpg

http://img78.imageshack.us/img78/5011/nfyre021af2ox2.jpg

http://img406.imageshack.us/img406/3439/worlddominator010ll3.jpg

Robb Jensen
05-13-07, 11:55
Glocks are ugly......:eek:



I agree, here's my newest ugly mutha!

http://img.photobucket.com/albums/v408/gotm4/gunpics/21SFpicsrightside.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/21SFpicsleftside.jpg

HARDONEM
05-13-07, 16:55
http://img234.imageshack.us/img234/6972/coinedds3.jpg

http://img82.imageshack.us/img82/1777/coined013gn1.jpg


Weather sucks so I'm shooting the Canon.:p

M4arc
05-13-07, 17:52
HARDONEM - Nice photos!

GotM4 - That is ugly...so ugly I want one! :D

SuicideHz
05-13-07, 18:47
Yes, I agree. Glock 26 and 27s are ugly as hell. Seriously.

HARDONEM
05-14-07, 10:29
HARDONEM - Nice photos!

GotM4 - That is ugly...so ugly I want one! :D

Thank you!! And yeah, Glocks are ugly, but they need love too!!:D

HARDONEM
05-17-07, 18:52
Showing off the newest member of the collection.

http://www.dropshots.com/photos/160941/20070517/b_063742.jpg

http://www.dropshots.com/photos/160941/20070517/b_190248.jpg

http://www.dropshots.com/photos/160941/20070517/b_191527.jpg

With brother...

http://www.dropshots.com/photos/160941/20070517/b_064545.jpg

SuicideHz
05-17-07, 23:14
http://www.dropshots.com/photos/160941/20070517/b_063318.jpg

That picture always looks betters with 100's than it does with a twenty and a ten :p

HARDONEM
05-18-07, 11:28
http://www.dropshots.com/photos/160941/20070517/b_063318.jpg

That picture always looks betters with 100's than it does with a twenty and a ten :p

yeah, but after I make this dash across the border that's all I'll have left!:D Seriously though, my kids won't let me near the Monopoly money anymore.

David Thomas
05-19-07, 23:10
GLOCK 21 after a few rounds of Federal American Eagle 230gr RN:

http://img.photobucket.com/albums/v441/DavidThomas/SHOOT51907010.jpg

http://img.photobucket.com/albums/v441/DavidThomas/SHOOT51907007.jpg

http://img.photobucket.com/albums/v441/DavidThomas/SHOOT51907015.jpg

http://img.photobucket.com/albums/v441/DavidThomas/SHOOT51907008.jpg

M4arc
05-20-07, 07:16
It's a thing of beauty David!

the1911fan
05-20-07, 07:52
My G19 in Southern Holsters Memphis IWB

http://img.photobucket.com/albums/v397/6285108/nice002.jpg

Glockster35
05-25-07, 12:03
My current project: Glock 35

http://www.myfilestash.com/userfiles/BoogeyMan/Glock35007small.JPG

David Thomas
05-28-07, 15:09
http://img.photobucket.com/albums/v441/DavidThomas/BOXofGLOCKS006.jpg

John Fettes
05-28-07, 15:24
David,

Who did your grip reduction, and are you pleased?

I'd like my Glocks better with a 1911 grip angle and the bottom of the trigger guard reworked so as to miss hammering my knuckle.

John

David Thomas
05-28-07, 18:19
David,

Who did your grip reduction, and are you pleased?

John

John,

Robar did the reduction. I really like it. The standard Glock 21 without a reduction just does not fit my hand. With this reduction, it is close to the 1911 grip angle, but there are differences.


here is a pic of my 17 with some grip tape I experimented with this weekend:

http://img.photobucket.com/albums/v441/DavidThomas/GLOCKcmmg004.jpg

graffex
05-28-07, 21:41
Which do you prefer out of the G21SF and the M&P .45 gotm4?

I'm wanting a .45 and I like M&P's but the .45 isn't for sale in Maryland yet. But I do like Glocks and have a G17 so a G21SF would fit right in.

John Fettes
05-28-07, 22:15
I need to break down and give them a call.

John

HARDONEM
06-02-07, 13:45
http://img501.imageshack.us/img501/747/carryme5ty0.jpg

http://img233.imageshack.us/img233/2595/carryons001sw5.jpg

http://img233.imageshack.us/img233/4782/ons003ug4.jpg



:D

a1huntingsupply
06-23-07, 14:27
http://i112.photobucket.com/albums/n178/Ruquick/DSC01252.jpg

HARDONEM
06-23-07, 19:05
http://farm2.static.flickr.com/1112/605007741_9fe7d91cda_b.jpg

Rana
06-25-07, 13:32
The quintessential "working man's" pistol.

http://imgcash4.imageshack.us/Himg235/scaled.php?server=235&filename=dscn1234uw3.jpg&xsize=640&ysize=480

HARDONEM
06-25-07, 16:58
The quintessential "working man's" pistol.


Hi. What is your sight set-up?

Rana
06-25-07, 17:10
Hi. What is your sight set-up?

Dawson front w/ Heine rear. Had another board member make a larger front insert of front sight as the standard Dawson Fiber Optic was too small...

HARDONEM
06-26-07, 14:57
Dawson front w/ Heine rear. Had another board member make a larger front insert of front sight as the standard Dawson Fiber Optic was too small...

Thanks. Was considering that front set-up for a used 19 I'm eyeing. Is it good for CCW?

Rana
06-26-07, 16:53
Thanks. Was considering that front set-up for a used 19 I'm eyeing. Is it good for CCW?

It is a great set up for range use. Very fast to get a sight picture, and easy on the eyes to me.

With that being said; I would not recommend a fiber optic as a CCW or Service Sight set up. For carry something more durable might be in order. Heine and Novak both make great carry sights and either would suffice on a CCW G19. My preference is for a black rear sight and dot (prefer tritium or gold bead) front sight.

When I CCW I carry a .45. If nothing else it gives me a "warm and fuzzy."

Gunfixr
07-14-07, 01:36
And now for something completely different:

http://i84.photobucket.com/albums/k31/Gunfixr/DuracoatGlock.jpg

HARDONEM
07-15-07, 10:55
And now for something completely different:


WOW, nice set-up!

karmapolice
07-18-07, 22:59
My 19

http://farm2.static.flickr.com/1265/848747586_f311266bdf_b.jpg
http://farm2.static.flickr.com/1190/618059146_ec9de8a57c_b.jpg

Glockster35
07-19-07, 08:22
I finally finished all the work I had planned on my G35. I am hoping to get a chance to shoot it this weekend.

The Glock 35:
http://www.myfilestash.com/userfiles/BoogeyMan/G35-0035small.JPG

I texturized the grip, undercut the trigger guard, added a thumb shelf, replaced the Glock barrel with one from Storm Lake, added the JP Ent. Mag release, added a Novak's SS extended guide rod, New ISMI springs, Warren tactical sights with F/O front and 5 new Glock G22 magazines, each with a Dawson 5 round extension.

I am extremely happy with the texturizing job I did. It feels like sandpaper, looks like a beavers coat and seems to be just what I wanted! :cheers:

My belt:
http://www.myfilestash.com/userfiles/BoogeyMan/G35-holster.JPG
Safailand nylon belt with velcro inner, CR Speed magazine pouches (5 of them), Blade Tech straight drop holster (soon to be replaced with CR Speed, once it arrives) Notice that one of the CR SPeed magazine pouches is lying horizontal, this magazine pouch will hold a ten round magazine to be used for "Barney Loading" only.

Robb Jensen
07-19-07, 08:37
Looks good bro. One of my friends that started shooting Limited recently with a Glock 35 is using the Taylor Freelance mag extensions which allow all the mags to hold 20 rounds but he said not all will seat with the slide forward.

DRich
07-19-07, 11:08
My "newest" Glock 30

http://texbiker.com/pics/g30a.jpg

Glockster35
07-19-07, 17:04
Looks good bro. One of my friends that started shooting Limited recently with a Glock 35 is using the Taylor Freelance mag extensions which allow all the mags to hold 20 rounds but he said not all will seat with the slide forward.

I am useing the Dawson Heavy ICE magwell, and have no issues with the Arredondo base pads I am using. I like them a lot. I pondered the Taylor Freelance pads myself, and will eventually buy one to try out.

Thanks for the compliment on the pistol. I will still tinker with it some more, to get it just right, but the major wirk is done!

TacDoc
07-26-07, 17:25
http://i17.tinypic.com/4vsjeci.jpg

:D

HARDONEM
07-27-07, 08:40
looking good and ready TACDOC! :D

TacDoc
07-27-07, 10:30
looking good and ready TACDOC! :D

Thanks! I'm waiting for my streamlight TLR-1 and I'll be completely "tactical" ready... :cool:

zen_grasshopper
07-31-07, 18:33
http://www.itctel.com/zengrass/G17left.jpg

Jon

nighthunter30
07-31-07, 20:26
I new here but just have to post my two Glock 22 and 26

https://www.m4carbine.net/attachment.php?attachmentid=261&d=1185931378

SuicideHz
07-31-07, 20:57
Welcome!


Does the treasury still sell bills in sheets?

nighthunter30
07-31-07, 21:55
Welcome!


Does the treasury still sell bills in sheets?

don't know about treasury but Bureau of Engraving
and Printing till do. http://www.moneyfactory.gov/store/section.cfm/69

SuicideHz
07-31-07, 22:52
Cool! I had a stepdad who was a magician and he bought a sheet. He cut a "bill" out so the outside corners were on the inside. It was a trick where he "turned a one dollar bill inside out."

Pic:

oh crap, I had a 1911 pic!

trukreltrog
08-24-07, 16:46
http://i89.photobucket.com/albums/k216/trukreltrog/DSCI0080-1.jpg

Glock 19/SWR Trident9

Grey
08-24-07, 17:12
Here is a picture of my G20. I am a magazine whore.

http://grey-matter.smugmug.com/photos/58232476-M.jpg

USMC
08-24-07, 22:16
http://img.photobucket.com/albums/v602/USMC/Pistol/G35a.jpg

bradb55
08-25-07, 22:31
Don't have a pic, but shot my buddies Glock 21. Damn was it fun. The grip was a little to big for my liking, but it was fun and smooth. It makes me miss my Glock 23.

USMC
08-25-07, 23:03
http://img.photobucket.com/albums/v602/USMC/Pistol/Glock-TLR1.jpg

chillindrdude
09-13-07, 11:06
http://www.smugmug.com/photos/177863875-M.jpg

i'll be putting on some heinie straight8s soon

Cuda444
09-18-07, 00:35
http://www.wikkidpissah.com/ftp/cuda444/glock.jpg

My humble contribution

HARDONEM
09-18-07, 09:25
Nice photo CUDA444

RyanS
09-20-07, 19:27
What it looked like in February when I got it.
http://www.itctel.com/~zengrass/G17%20001.jpg

Now. It's been use, spray painted Brown for a week, stippled, and it just keeps going and going.
http://www.itctel.com/~zengrass/Glock%2017%20now.jpg

Jon

I an attest, there is no way that gun is going to move around in the hand.

Voodoochild
09-20-07, 19:44
Ryan where did you get that stippling done? That is something I have wanted to get done on my 19 with a few other things. Nice Glock by the way..

SuicideHz
09-20-07, 20:41
That is Zen_Grasshopper's stippled gun. ;)

Voodoochild
09-20-07, 20:46
Damn it I guess reading is fundamental. So where did Zen_Grasshopper get that stippling done?

zen_grasshopper
09-20-07, 20:52
I got pissed off at grip tape one day as I had to replace it once a week. So I grabbed my trusty soldering iron and went to town. It is easy to do once you get started, and as you can see owning a pretty gun does not matter to me, only functionality.

Jon

Voodoochild
09-20-07, 21:06
That is good stuff man looks like the same thing Wendell Concepts. I will have to experiment with some other things before I take on the Glock!!

DocHolliday01
09-22-07, 13:17
http://img114.imageshack.us/img114/6017/n5037452633127786559ho5.jpg (http://imageshack.us)

Clockwise from top 21, 27, 22.

ZGXtreme
10-01-07, 09:21
Here is my new duty pistol; 21C with Meprolight night sights and a X200/pressure switch combo at the moment, waiting to switch to the X300.

Also have a 30 with Trijicon sights as a back-up/off-duty gun.

http://i235.photobucket.com/albums/ee266/zgxtreme_photos/Glock21C001.jpg

Evan_O
10-06-07, 00:20
here's my fairly new G19. put about 200rds through it before adding a TruGrip, THE captured guide rod (having issues with it), and Warren Tactical sights. Also relieved the trigger guard a bit and put on a clip draw. extended mag and slide releases will be on soon. at that point the only money thrown at her will be for ammo and range time :D

http://home.comcast.net/~djyankey/images/firearms/DSC00459.JPG


http://home.comcast.net/~djyankey/images/firearms/DSC00461.JPG

Damn Yank mind posting your pics again? I'm very interested in the high cut job on your pistol.

Thanks!

bushmasterar15
10-06-07, 21:20
Man I love all of the pics.

Canonshooter
10-14-07, 13:33
G17C in a SERPA holster on Wilderness Tactical Products laminate belt;

http://www.canonshooter.com/photos2/g17c-5.jpg

Got_Guns
10-21-07, 11:10
My refinished G19

http://img.photobucket.com/albums/v230/got_guns/G19.jpg

wahoo95
11-08-07, 11:27
Here are my WonderTwins....G23 & G24
http://i210.photobucket.com/albums/bb244/a996hawk/ODGlock1.jpg
http://i210.photobucket.com/albums/bb244/a996hawk/ODGlock2.jpg

NP3 G27
http://i210.photobucket.com/albums/bb244/a996hawk/Glock27.jpg

Glockster35
11-08-07, 13:14
Here are my WonderTwins....G23 & G24
http://i210.photobucket.com/albums/bb244/a996hawk/ODGlock1.jpg
http://i210.photobucket.com/albums/bb244/a996hawk/ODGlock2.jpg

NP3 G27
http://i210.photobucket.com/albums/bb244/a996hawk/Glock27.jpg

Wonder Twins...do you have a special ring to operate them? Can we see it?:p :D :p :D

wahoo95
11-08-07, 13:24
I thought about calling them Green Hornet & Kato

Alaskapopo
12-17-07, 23:29
Glock 17 my SSP pistol in IDPA. It has a 3.5 pound connector and competition trigger spring.

http://i59.photobucket.com/albums/g299/355sigfan/Semi%20auto%20pistols/IM001012.jpg

My bug a Glock 26
http://i59.photobucket.com/albums/g299/355sigfan/Semi%20auto%20pistols/IM000799.jpg

PetesTactical
12-20-07, 21:15
http://www.petestacticalknives.com/G-20c.jpg

My 20C 6" running double tap beartooth loads

doorkicker
12-21-07, 14:35
http://i17.photobucket.com/albums/b67/mlabook/G19-Trinity.jpg
G19
LW 3.5 connector
Extended slide lock
Meprolight NS
Federal 1/28TPI barrel
Gemtech Trinity can :D

John Fettes
12-21-07, 15:57
Are stock sights tall enough to see over the can?

Looks like a great setup, enjoy!

John

doorkicker
12-21-07, 16:03
The Meprolights are a little low and don't clear the can like they should, but I don't shoot past 25 with the can. I rarely ever shoot at 25 with it.

SuicideHz
12-21-07, 16:27
Damn Yank mind posting your pics again? I'm very interested in the high cut job on your pistol.

Thanks!

I did that cut for him after doing mine in 2003.

It's very easy with a Dremel and a sanding drum. You need to make sure you drink a little alcohol to steady your hands and make sure your t***icles are up to the task!

John Fettes
12-21-07, 16:57
A can for a G19 or 26 has interested me.

John

TacDoc
12-22-07, 06:54
http://i7.tinypic.com/8bhno8w.jpg

David Thomas
12-22-07, 16:34
Rainy day spent loading mags - getting ready for a range day tomorrow:

http://img.photobucket.com/albums/v441/DavidThomas/rainydayindoors011.jpg

Glock 17 muzzle blast:

http://img.photobucket.com/albums/v441/DavidThomas/XSmuzzleflash.jpg


http://img.photobucket.com/albums/v441/DavidThomas/XS-17-5.jpg

JTR
12-26-07, 16:48
The little G34 pinging away.
http://photos.templarfirearms.com/albums/userpics/10001/normal_136679453-L.jpg

The little G23 that goes everywhere I go.
http://photos.templarfirearms.com/albums/userpics/10001/normal_IMG_6162.JPG

eng208
01-01-08, 16:35
http://www.hunt101.com/data/500/medium/100_2363.jpg

These are two of my three Glocks, a G19 and a G30. I have another G19 just like it my wife uses.

M4arc
01-06-08, 11:58
http://i235.photobucket.com/albums/ee64/oclvtrek/newG19.jpg

Robb Jensen
01-13-08, 15:57
My Glock 17 w/Warren 'mix' sights, Vickers mag-catch and TruGrip grip tape.
http://img.photobucket.com/albums/v408/gotm4/Glock.jpg
http://img.photobucket.com/albums/v408/gotm4/Glock2.jpg
http://img.photobucket.com/albums/v408/gotm4/Glock3.jpg

SIMPLYDYNAMIC
01-14-08, 20:14
She may not be pretty but she runs...oh and has about 40,000 plus rounds on her
-3.5 ghostRocker
-Extended mag catch
-JP well
-Custom hand crafted stipple job!
-TruGlo trits
http://i3.photobucket.com/albums/y65/simplydynamic/g17.jpg
http://i3.photobucket.com/albums/y65/simplydynamic/th_MVI_1291.jpg (http://s3.photobucket.com/albums/y65/simplydynamic/?action=view&current=MVI_1291.flv)
http://i3.photobucket.com/albums/y65/simplydynamic/th_MVI_1293.jpg (http://s3.photobucket.com/albums/y65/simplydynamic/?action=view&current=MVI_1293.flv)

Craft714
01-15-08, 00:21
Glock M19

KDG
01-17-08, 19:11
Travis, very cool videos..great shooting

Like Grant said on AK's
And we all know about AR's

Everyone NEEDS a Glock !

Hmmm, I think I see a G17 in the near future

MarcS
01-20-08, 04:06
Mine looks like those.

VA_Dinger
01-20-08, 06:18
G19

http://img.photobucket.com/albums/v74/va_dinger/RussiantypeIII006.jpg

This one still needs a set of Heinie, Warren, or Novak sights.

cyclone72
01-21-08, 17:36
here's mine getting some upgrades

http://img255.imageshack.us/img255/245/hpim0790fn9.jpg

Heres every thing taken apart


http://img255.imageshack.us/img255/8896/hpim0791qj0.jpg


this is all the new stuff I added-extended slide release and slide stop,chrome pins,3.5 lb connector,adj. trigger stop and custom backplate.


http://img255.imageshack.us/img255/3849/hpim0794ic1.jpg

putting the trigger stop back together


http://img255.imageshack.us/img255/4448/hpim0795tp3.jpg

connector

my batteries went crapolla but Ill post more pics

wahoo95
01-21-08, 21:35
Be sure to polish up that trigger bar why you have it apart.

cyclone72
01-21-08, 21:39
What will that do?Im assuming it will make the trigger pull smoother,Good idea.

wahoo95
01-21-08, 21:57
That it will. Put a mirror polish on those contact points and your trigger pull will be much smoother!

cyclone72
01-21-08, 22:04
what can I use too polish it?

wahoo95
01-21-08, 22:26
Use Flitz and a soft cloth. Would say use a Dremel, but a lot of people get carried away with their polishing when they go that route. PM me if you have anymore questions............

cyclone72
01-22-08, 08:15
thanks

AllanRR
01-22-08, 12:17
http://allanromero.smugmug.com/photos/157393922-L.jpg

koalorka
01-22-08, 13:01
http://img186.imageshack.us/img186/8730/img3815aq2.jpg (http://imageshack.us)

David Thomas
01-22-08, 14:15
koalorka,

G17 and X300... nice combo. Looks brand new.

koalorka
01-22-08, 19:43
koalorka,

G17 and X300... nice combo. Looks brand new.

Thanks, they are. Excellent light BTW. I'm also waiting to get my LAV-TangoDown extended mag release and some Triji night sights for this one. Shoots consistently so far.

JBRIII
01-26-08, 11:41
Texturing from Parabellum

http://img.photobucket.com/albums/v720/jbreamsiii/glock19griptex1.jpg

SuicideHz
01-26-08, 12:00
Looks slippery.

JBRIII
01-26-08, 17:40
Got this back today. It really feels amazing. I like it a lot. Of course it's 20 degrees right now and I'm not sweaty, but I don't see how you could lose your grip on this. Gave him my 21SF to do next.

Robb Jensen
02-06-08, 06:49
I just got it yesterday for $355 out the door! Carried a lot, barely ever shot Glock 19 w/3 NFML mags and night sights (dated 1993 and they still work) and it hasn't had the 'upgrade' which I'll do myself.

I researched the serial number and it was made in May of 1989.

http://img.photobucket.com/albums/v408/gotm4/gunpics/Glock19004.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/Glock19009.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/Glock19007.jpg

M4arc
02-06-08, 11:38
I just got it yesterday for $355 out the door! Carried a lot, barely ever shot Glock 19 w/3 NFML mags and night sights (dated 1993 and they still work) and it hasn't had the 'upgrade' which I'll do myself.

I researched the serial number and it was made in May of 1989.

http://img.photobucket.com/albums/v408/gotm4/gunpics/Glock19004.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/Glock19009.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/Glock19007.jpg

Damn dude! I want a deal like that! Lucky dog...

koalorka
02-13-08, 23:06
http://img509.imageshack.us/img509/682/img3890ky6.jpg (http://imageshack.us)

srfl
02-14-08, 01:52
Greetings to all....first post.

My only Glock, a G20 10mm, customized by Robar Industries. Besides the grip reduction and high grip modification, the gun has a NY trigger, Bar Sto match barrel I purchased for $135, new, from someone on Glocktalk, and Tru-Glo TFO sights I installed.

http://i8.photobucket.com/albums/a47/srfl/Glocks/Glock20RobarCustom2.jpg

JBRIII
02-18-08, 19:07
double post

JBRIII
02-18-08, 19:07
http://img.photobucket.com/albums/v720/jbreamsiii/21sf2.jpg

http://img.photobucket.com/albums/v720/jbreamsiii/21SF1.jpg

http://img.photobucket.com/albums/v720/jbreamsiii/21sf3.jpg

http://img.photobucket.com/albums/v720/jbreamsiii/21sf4.jpg

Ray T
02-21-08, 17:11
Here are some pictures of my friends' (V.P.D.) - Glock 21 (1st gen) and Glock 35. He wanted several modifications done to them. Grip reduction, stippling, reliability package, and trigger job.

Glock 35 (stock)

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics024.jpg

Glock 35 (modified)

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics027.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics029.jpg

Glock 21 and Glock 35

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics025.jpg

Glock 21 (stock)

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics023.jpg

Glock 21 (modified)

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics035.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics033.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics038.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics032.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/z-pics040.jpg

Ray T
02-21-08, 17:17
I just finished customizing my new Glock 20. I didn't know if Glock was going to make a 20SF, so I built one. :)

Brand new Glock 20 (picked up on Feb. 14, 08) - BEFORE

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Glock20Pics12-07009.jpg


AFTER - Polished all internal parts, hand fitted a Bar-Sto G20 10mm Barrel, Tru-Glo T.F.O. sights, Ny-1 Trigger, Ghost 3.5 connector, ISMI 22 lb. recoil spring, ISMI Stainless steel guide rod, Grip reduction and stippling (done by me :) ) That's it for now.

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Glock202-07001.jpg

Here is my Glock 27 - grip reduction and stippling.
http://i207.photobucket.com/albums/bb68/BrokenArrow13/stippledglocks003.jpg

My third customized Glock, G23. Same as the G27, grip reduction and stippling.
http://i207.photobucket.com/albums/bb68/BrokenArrow13/stippledglocks002.jpg

Here is my Glock 34 with a partial grip reduction and my stippling job.
http://i207.photobucket.com/albums/bb68/BrokenArrow13/stippledglocks004.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Glock1834001.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Glock1834003.jpg

My customized Glock 20 with my grip reduction and stippling.
http://i207.photobucket.com/albums/bb68/BrokenArrow13/stippledglocks005.jpg

My customized Glock 21 SF with stippling on the sides. Hand fitted Bar-Sto barrel, T.F.O. sights, ISMI 20 lb. recoil spring and stainless guide rod, NY-1 trigger spring with 3.5 connector.
http://i207.photobucket.com/albums/bb68/BrokenArrow13/stippledglocks006.jpg

For the Airsoft fans - my Glock 18 :)
http://i207.photobucket.com/albums/bb68/BrokenArrow13/stippledglocks001.jpg

Ray T
02-21-08, 21:09
My 20 and 21 SFs have Bar-Sto barrels, T.F.O. sights, NY-1 trigger with 3.5 lb. connectors, Stainless steel guide rod with 20 lb. (G21SF) and 22 lb. (G20) ISMI springs.

http://i207.photobucket.com/albums/bb68/BrokenArrow13/stippledglocks024.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/stippledglocks023.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/stippledglocks022.jpg

M4arc
02-22-08, 20:00
Sweet post Ray T!

Ray T
02-23-08, 00:10
Sweet post Ray T!


Thanks! If you have questions, you can email or PM me.

DogRanger
02-23-08, 15:59
Good pics and nice blade also.

DM-SC
02-25-08, 22:23
Here's my G34 with a recently refinished slide...

http://home.sc.rr.com/dmsc/G34%20After%2001.jpg

http://home.sc.rr.com/dmsc/G34%20After%2002.jpg

Ray T
02-25-08, 22:34
Here's my G34 with a recently refinished slide...

http://home.sc.rr.com/dmsc/G34%20After%2001.jpg

http://home.sc.rr.com/dmsc/G34%20After%2002.jpg


Looks really nice! Who finished your slide? :cool:

DM-SC
02-26-08, 08:00
Looks really nice! Who finished your slide? :cool:

Thanks!

It was done by CCR Refinishing, in Tennessee.

http://www.ccr-refinishing.com/index.html

Ray T
02-26-08, 18:55
Thanks!

It was done by CCR Refinishing, in Tennessee.

http://www.ccr-refinishing.com/index.html

Thanks for posting the info. How well does this finish hold up to kydex / plastic holsters?

DM-SC
02-27-08, 11:05
Thanks for posting the info. How well does this finish hold up to kydex / plastic holsters?

I just got it back from them this past Monday so, I really don't know yet.

I'll post again once I have given it some use...

jayjaytuner
02-27-08, 13:13
http://i114.photobucket.com/albums/n275/jayjaytuner/glock2.jpg
http://i114.photobucket.com/albums/n275/jayjaytuner/glock.jpg

g19 with comptac mtac

Gentle Ben
02-27-08, 13:51
Here's some recent work I did for customers (ignore the '01 datestamp):

http://i15.photobucket.com/albums/a353/Snail50/PICT0054.jpg

http://i15.photobucket.com/albums/a353/Snail50/G21SF1.jpg

http://i15.photobucket.com/albums/a353/Snail50/G21D.jpg

http://i15.photobucket.com/albums/a353/Snail50/G26Small.jpg

http://i15.photobucket.com/albums/a353/Snail50/G21SFa.jpg

http://i15.photobucket.com/albums/a353/Snail50/G21SF.jpg

Robb Jensen
02-27-08, 14:06
My Glock 31.

http://img.photobucket.com/albums/v408/gotm4/e3f7838d.jpg
http://img.photobucket.com/albums/v408/gotm4/d6a35991.jpg
http://img.photobucket.com/albums/v408/gotm4/ee29cca6.jpg
http://img.photobucket.com/albums/v408/gotm4/4f1771bd.jpg


My Glock 30.

http://img.photobucket.com/albums/v408/gotm4/305f0e6a.jpg
http://img.photobucket.com/albums/v408/gotm4/014e5ccf.jpg
http://img.photobucket.com/albums/v408/gotm4/b5c9e3e8.jpg

Ray T
02-28-08, 20:35
I finished a Glock 35 today. The customer wanted a rounded and stippled trigger guard and the stock grenade checkering removed and the grip stippled 360 degrees.

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics008.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics005.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics007.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics006.jpg

jmart
02-28-08, 20:42
My Glock 31.

http://img.photobucket.com/albums/v408/gotm4/e3f7838d.jpg




After going through the long "Sand Test" thread, and then seeing how it morphed into a .40 Glock thread, how does your 31 run? Any issues? Have you ever run a light on it?

Robb Jensen
02-28-08, 21:04
After going through the long "Sand Test" thread, and then seeing how it morphed into a .40 Glock thread, how does your 31 run? Any issues? Have you ever run a light on it?

I broke a trigger spring on it at 2800 something rounds. Nothing else has ever failed I don't shoot it much anymore since .357SIG ammo is insanely priced now. When I had just got into the gun business and worked at another store my cost on factory reloads was about $7/50rounds. So then I used to shoot the hell out of it. I put just a few hundred rounds though it a year now. Never shot it with a light mounted. I did shoot it at a GSSF match in Unlimited division (with a Siedler mount and EOTech 551) and didn't have any problems I put almost 1K rounds through it with that optic mounted before the match. SimplyDynamic probably remembers.

http://img.photobucket.com/albums/v408/gotm4/4fbddfc9.jpg
http://img.photobucket.com/albums/v408/gotm4/1334aa15.jpg
http://img.photobucket.com/albums/v408/gotm4/robbtoptonopen.jpg

Team I and II Shooters Paradise GSSF (and me, I was already Master at that time so I wasn't on either of the Teams).
http://img.photobucket.com/albums/v408/gotm4/teamsandme.jpg

Trinity-Seven
02-28-08, 21:25
My Glock 17 with internal Lasermax.
http://i142.photobucket.com/albums/r103/latinocowboy/hannah/Glock17w.jpg
(laser is photoshopped for effect)

jmart
02-28-08, 22:25
I broke a trigger spring on it at 2800 something rounds. [/IMG]

Stock or extra power?

Robb Jensen
02-29-08, 04:28
Stock or extra power?

Stock.

SIMPLYDYNAMIC
02-29-08, 13:13
I broke a trigger spring on it at 2800 something rounds. Nothing else has ever failed I don't shoot it much anymore since .357SIG ammo is insanely priced now. When I had just got into the gun business and worked at another store my cost on factory reloads was about $7/50rounds. So then I used to shoot the hell out of it. I put just a few hundred rounds though it a year now. Never shot it with a light mounted. I did shoot it at a GSSF match in Unlimited division (with a Siedler mount and EOTech 551) and didn't have any problems I put almost 1K rounds through it with that optic mounted before the match. SimplyDynamic probably remembers.

http://img.photobucket.com/albums/v408/gotm4/4fbddfc9.jpg
http://img.photobucket.com/albums/v408/gotm4/1334aa15.jpg
http://img.photobucket.com/albums/v408/gotm4/robbtoptonopen.jpg

Team I and II Shooters Paradise GSSF (and me, I was already Master at that time so I wasn't on either of the Teams).
http://img.photobucket.com/albums/v408/gotm4/teamsandme.jpg

Ya I remember that ugly ass gun! you still have that hidious thing? LOL
Needs a T-1!

Ray T
02-29-08, 19:12
Here's a pair of Glock 34s that I finished today. My grip reduction and stippling, O.D. Gun-Kote finish, trigger jobs, and polished internals.

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics014.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics012.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics016.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics015.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics010.jpg

Ray T
03-03-08, 20:01
Here is a GLock 17 that I finished today. Full 360 degrees stippling with front stock checkering left intact. Polished feed ramp and chamber. Rounded trigger guard with stippling.

Here you go!
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics036.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics033.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics031.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics027.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics029.jpg
http://i207.photobucket.com/albums/bb68/BrokenArrow13/Akahr-pics028.jpg

QuickStrike
03-04-08, 05:04
Got it on Sunday. My first Glock.


http://i28.photobucket.com/albums/c247/ARTYMARTY/IMG_3596.jpg


Will probably be carried. :cool:

M4arc
03-04-08, 08:40
Congrats QuickStrike!

I have a feeling that won't be your last Glock ;)

DM-SC
03-04-08, 10:18
Got it on Sunday. My first Glock.

Will probably be carried. :cool:

My G19 was my first Glock. It's given me 10 years of great service! :cool:

QuickStrike
03-04-08, 17:14
My G19 was my first Glock. It's given me 10 years of great service! :cool:


Congrats QuickStrike!

I have a feeling that won't be your last Glock ;)


I forsee another glock 19 in the future. :D

Ray T
03-07-08, 02:47
Here is a Glock 17 that I finished today. Gun-Kote O.D. slide, Heinie Glock sights, rounded trigger guard with stippling, grip reduction with stippling, polished chamber, feed ramp, and breach face, NY-1 trigger with 3.5 lbs connector, and stainless guide rod.

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics014.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics006.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics013.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics012.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics004.jpg

SuicideHz
03-07-08, 18:25
Here is a Glock 17 that I finished today. Gun-Kote O.D. slide, Heinie Glock sights, rounded trigger guard with stippling, grip reduction with stippling, polished chamber, feed ramp, and breach face, NY-1 trigger with 3.5 lbs connector, and stainless guide rod.

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics014.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics006.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics013.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics012.jpg

http://i207.photobucket.com/albums/bb68/BrokenArrow13/Aaa-pics004.jpg

Is it worth the amount of time it takes to cut those little pieces of tape that go in between the serrations on the rear of the slide?

Good and easy way to make money for you, good way to waste money for them as far as I can tell. They don't appear to come close enough to the surface of the slide to help. Oh well, right? ;)

Ray T
03-07-08, 22:11
The 3m friction tape isn't suppose to be flush with the slide. With it being slightly flush from the actual surface of the slide, it gives a positive grip when racking the slide. No slippage at all. The owners like it. :)