View Full Version : honest opinion of my lower
fivefivesix
04-04-10, 12:23
but please dont make me cry it is my first build and shoots flawless. no jams etc. i have a yhm lightweight forearm on the way with the end cap. my lower is from ati (american tactical importers) and has the keyhole from the forger. are they crap or has ne1 even heard of em. im in the process of upgrading everything and was wondering should i sticj with this lower or buy a new one. thanks jason h
http://i470.photobucket.com/albums/rr69/jasonhaussler/DSCF1611.jpg
if its assembled and fires, there's nothin wrong with the lower receiver.. the parts used in the lower are a big unknown, but even crappy LPKs usually dont cause any problems. to avoid ending up with unknown lower receiver parts, build it yourself or buy a quality lower from LMT, BCM, DD, Colt, Sabre, or Stag
I don't put much stock in the stamp on a lower. As long as it's in spec and you put quality parts inside you should be good to go.
I concur that as long as it's in spec and has a quality LPK you should be GTG. I'm much more likely to slam you on the YHM rails:D.
only thing wrong with Yankee is there heavy and fat and there only redeeming quality is there cheap. and i know we've all dated a girl with those same qualities.
Lee- "Dated" probably isn't the term most of us would use.:p
only thing wrong with Yankee is there heavy and fat and there only redeeming quality is there cheap. and i know we've all dated a girl with those same qualities.
This quote is badass.
but please dont make me cry it is my first build and shoots flawless. no jams etc. i have a yhm lightweight forearm on the way with the end cap. my lower is from ati (american tactical importers) and has the keyhole from the forger. are they crap or has ne1 even heard of em. im in the process of upgrading everything and was wondering should i sticj with this lower or buy a new one. thanks jason h
http://i470.photobucket.com/albums/rr69/jasonhaussler/DSCF1611.jpg
ATI is Amchar. I don't think that I would buy any AR products from them.
C4
Fivefivesix,
This is a slightly more professional board than most others, and posting in complete sentences instead of texting may get you more answers with future questions.
You may also want to consider asking questions before you buy, instead of afterwards.
Lee- "Dated" probably isn't the term most of us would use.:p
what on earth could you mean;)
This quote is badass.
once in awhile i come up with one.
now ill prolly never use a yankee rail unless im running a 7in barrel and a can then ill get a yankee rail in the 10in range.
if you want a good rail at a decent price troy is your friend.
Quiet-Matt
04-05-10, 10:04
Fivefivesix,
This is a slightly more professional board than most others, and posting in complete sentences instead of texting may get you more answers with future questions.
:p Well said Stick. Is took me a minute to figure out that "ne1" crap. I take pride in my ability to type complete words and interact with others face to face. Now I'm starting to feel old.
fivefivesix
04-05-10, 10:16
please forgive my wording and texting, i do both so much i forget how to type on my laptop. when i was at another site i was flammed right from the go so i bought instaed of asking. it was cheap and i have five kids and wanted an m4 real bad. im now replacing the components with better parts. ive bought a spikes lower wich is better than what i have. now the bcg, as in wich one a spikes or bcm? i see a lot of folks here seem to favor bcm. the bcg i have now came from dsarms is that a decent product or ditch it? thanks for the input
please forgive my wording and texting, i do both so much i forget how to type on my laptop. when i was at another site i was flammed right from the go so i bought instaed of asking. it was cheap and i have five kids and wanted an m4 real bad. im now replacing the components with better parts. ive bought a spikes lower wich is better than what i have. now the bcg, as in wich one a spikes or bcm? i see a lot of folks here seem to favor bcm. the bcg i have now came from dsarms is that a decent product or ditch it? thanks for the input
BCM's BCG's are second to none.
C4
please forgive my wording and texting, i do both so much i forget how to type on my laptop. when i was at another site i was flammed right from the go so i bought instaed of asking. it was cheap and i have five kids and wanted an m4 real bad. im now replacing the components with better parts. ive bought a spikes lower wich is better than what i have. now the bcg, as in wich one a spikes or bcm? i see a lot of folks here seem to favor bcm. the bcg i have now came from dsarms is that a decent product or ditch it? thanks for the input
I have been curious about the DS Arms bolt carrier group as well. Anyone? Last I heard the DSA lowers were LMT forgings.
alot of companys use the same forgings. what makes the difference is the tolerance on drilling the holes.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.