jwfuhrman
04-04-10, 21:03
Got my 18.5in Noveske SPR barrel for sale. No problems at all. Barrel shoots ABOSLUTELY amazing. I just need some money at the moment and this was my HS-SHTF rifle(Holy shit the Commies have invaded or Holy Shit I'm broke and need cash).
18.5in Noveske SPR barrel
- BARELY USED, 100RDS OF 75GR HORNADY MATCH BTHP AMMO
SJC Titan Compensator
18" SPR 5.56mm Stainless Barrel
--1 in 7" twist improved polygonal rifling
--5.56 Noveske Match Mod 0 chamber
--Extended feed ramps
--Bead blasted finish
--Intermediate length gas system
--Gas tube
--Pinned Low Profile Gas Block
--1/2x28 threads
--Medium Contour
Weight: 38oz
The Intermediate length gas system is 1.5" shorter then the rifle length gas system.
The barrel ships with gas block installed. This barrel is designed for our gas block that is 1" long(INCLUDED). A standard front sight base is 1.9" long and WILL NOT FIT. Barrel installation should be performed by a qualified gunsmith. Installation of the gas block dowel pin and gas block is required to complete the assembly process.
# LUND/SJC TITAN COMPENSATOR
Developed by Grandmaster 3-Gun shooter Erik Lund and S&J Customs
# Legal for Limited,Tactical, and Open Division rifles
# Designed with gas vectoring technology to maximize recoil control, minimize torque and shot to shot recovery time
# Design traps expanding gasses in the baffles and increases dwell time for maximum efficiency possible
# Optimized to work with any length 22 caliber barrel (1/2x28 thread twist)
I accept PayPal, buyer must pay 3.5% PayPal fee upon purchase.
Payments will be sent to jwfuhrman@live.com
Shipping is UPS Ground. Faster shipping is extra.
http://i6.photobucket.com/albums/y201/paintballaddict/photo7.jpg
18.5in Noveske SPR barrel
- BARELY USED, 100RDS OF 75GR HORNADY MATCH BTHP AMMO
SJC Titan Compensator
18" SPR 5.56mm Stainless Barrel
--1 in 7" twist improved polygonal rifling
--5.56 Noveske Match Mod 0 chamber
--Extended feed ramps
--Bead blasted finish
--Intermediate length gas system
--Gas tube
--Pinned Low Profile Gas Block
--1/2x28 threads
--Medium Contour
Weight: 38oz
The Intermediate length gas system is 1.5" shorter then the rifle length gas system.
The barrel ships with gas block installed. This barrel is designed for our gas block that is 1" long(INCLUDED). A standard front sight base is 1.9" long and WILL NOT FIT. Barrel installation should be performed by a qualified gunsmith. Installation of the gas block dowel pin and gas block is required to complete the assembly process.
# LUND/SJC TITAN COMPENSATOR
Developed by Grandmaster 3-Gun shooter Erik Lund and S&J Customs
# Legal for Limited,Tactical, and Open Division rifles
# Designed with gas vectoring technology to maximize recoil control, minimize torque and shot to shot recovery time
# Design traps expanding gasses in the baffles and increases dwell time for maximum efficiency possible
# Optimized to work with any length 22 caliber barrel (1/2x28 thread twist)
I accept PayPal, buyer must pay 3.5% PayPal fee upon purchase.
Payments will be sent to jwfuhrman@live.com
Shipping is UPS Ground. Faster shipping is extra.
http://i6.photobucket.com/albums/y201/paintballaddict/photo7.jpg