USMC Tanker
04-06-10, 00:13
**SOLD**
WTS: Like-new GG&G Folding front sight post
Where: San Diego, CA
I am trying to sell my like-new GG&G folding front sight post. It came installed on my new GG&G upper receiver, and I decided to go with a 12" rail, so the front sight had to go.
The assembly shows nearly zero wear, and is again, in like-new condition.
Retail: $173.50
I'm asking: $65 or best offer
From the GG&G website: The GG&G Bolt On Flip Up Front Sight Gas Block is a top of the line flip up front sight gas block system that is very easy to install. The Flip Up Front Sight Gas Block is secured in place by a Tri-Point clamping mechanism guaranteeing consistent accuracy and trouble free operation. The sculpted finger groove design is not only ergonomic but allows for quick deployment. Manufactured from 4140 chrome moly billet steel with hardened wear points and finished by a mil-spec manganese phosphate process, this unit is ready for rugged use. As a method of standardization the M16A2 square front post is used, which is fully adjustable for elevation zero. Protective ears are provided for the sight with additional gripping serrations to aid in raising and lowering the sight assembly.
The GG&G Bolt On Flip Up Front Sight Gas Block is equipped with a spring-loaded, positive wedge lock detent system that keeps the front sight in the up position preventing accidental lowering of the unit while maintaining on target repeatability. The clamp on front sight locking system is designed to be operated with the off-hand so that the fire control hand does not need to be removed from the weapons fire control system to deploy or lower the sight. Further, the sight comes equipped with a standard 1 inch, ambidextrous sling swivel that bolts to the gas block at a low position.
Additionally, there is a provision for the easy attachment of an optional MIL-STD-1913, ambidextrous 1"- inch long dovetail for mounting flashlights, LAMs and other small accessories onto the gas block base.
A Trijicon tritium front sight post can also be added to enhance low light shooting capability. If purchased with the Bolt On Flip Up Front Sight, we will install the Trijicon tritium sight post for free.
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/Bolt-On-FUFS-Dwn.jpg
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/Bolt-On-FUFS-Up.jpg
Actual sight for sale:
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/DSC03374.jpg
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/DSC03375.jpg
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/DSC03376.jpg
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/DSC03378.jpg
It's a very sturdy sight and made well! The sight also comes with the optional sling swivel, which I took off in favor of a rail-mounted attachment point.
Retail: $173.50
I'm asking: $65 or best offer
**SOLD**
WTS: Like-new GG&G Folding front sight post
Where: San Diego, CA
I am trying to sell my like-new GG&G folding front sight post. It came installed on my new GG&G upper receiver, and I decided to go with a 12" rail, so the front sight had to go.
The assembly shows nearly zero wear, and is again, in like-new condition.
Retail: $173.50
I'm asking: $65 or best offer
From the GG&G website: The GG&G Bolt On Flip Up Front Sight Gas Block is a top of the line flip up front sight gas block system that is very easy to install. The Flip Up Front Sight Gas Block is secured in place by a Tri-Point clamping mechanism guaranteeing consistent accuracy and trouble free operation. The sculpted finger groove design is not only ergonomic but allows for quick deployment. Manufactured from 4140 chrome moly billet steel with hardened wear points and finished by a mil-spec manganese phosphate process, this unit is ready for rugged use. As a method of standardization the M16A2 square front post is used, which is fully adjustable for elevation zero. Protective ears are provided for the sight with additional gripping serrations to aid in raising and lowering the sight assembly.
The GG&G Bolt On Flip Up Front Sight Gas Block is equipped with a spring-loaded, positive wedge lock detent system that keeps the front sight in the up position preventing accidental lowering of the unit while maintaining on target repeatability. The clamp on front sight locking system is designed to be operated with the off-hand so that the fire control hand does not need to be removed from the weapons fire control system to deploy or lower the sight. Further, the sight comes equipped with a standard 1 inch, ambidextrous sling swivel that bolts to the gas block at a low position.
Additionally, there is a provision for the easy attachment of an optional MIL-STD-1913, ambidextrous 1"- inch long dovetail for mounting flashlights, LAMs and other small accessories onto the gas block base.
A Trijicon tritium front sight post can also be added to enhance low light shooting capability. If purchased with the Bolt On Flip Up Front Sight, we will install the Trijicon tritium sight post for free.
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/Bolt-On-FUFS-Dwn.jpg
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/Bolt-On-FUFS-Up.jpg
Actual sight for sale:
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/DSC03374.jpg
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/DSC03375.jpg
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/DSC03376.jpg
http://i12.photobucket.com/albums/a246/dcarter_usmc/Weapons/DSC03378.jpg
It's a very sturdy sight and made well! The sight also comes with the optional sling swivel, which I took off in favor of a rail-mounted attachment point.
Retail: $173.50
I'm asking: $65 or best offer
**SOLD**