View Full Version : Pics of Midlengths
EliteA4Aggie
07-17-06, 08:36
if you've got one, post a pic. I need some ideas.:cool:
Certainly!
http://members.cox.net/mwinder3/middy.jpg
Specs:
PWA Lower
CMT/Stag LPK
Vltor buttstock with "H" buffer
Magpul trigger guard
TD Battle Grip
CMT/Stag upper receiver
Sabre Defense 1:7 twist mid-length barrel
CMT/Stag MP'd BCG
CMT/Stag CH
Larue 9.0 rail
EoTech 552
Larue EoTech Riser
Larue BUIS
TD Vertical Grip (Carrying a spare bolt and firing pin)
Up next:
Blue Force/Vickers Tactical Sling
http://www.cavalryarms.com/ironman2006/308.jpg
Nitrox- is that coyote with OD KG on your rifle?
What's on the front of your gear, outside of the mag compartments? Shotgun shells?
No, that is the new tactical Ranger Coyodrab. If you were tacticool you would know that.
Yes, shot gun shells. Shot guns suck, they are my arch nemesis.
good reason to have the shells then...
EliteA4Aggie
07-17-06, 17:06
those are some nice guns..my DD rail should come in at the end of the week, along with a few other parts. once i get it all together i will post a pic
Here's a few. Hope to receive a lower back from Stag today or tomarrow. It's going on a mid-length as well. I'll try to have pics of the newest mid-lenght up by the end of the week.
http://www.coloradoshooting.org/75%20gm%20a.jpg
http://www.coloradoshooting.org/75%20coyote%20mid%20a.jpg
http://www.coloradoshooting.org/usmc03%20sml%201%20sized.jpg
http://img291.imageshack.us/img291/5305/dscn1512qi7.jpg
http://img.photobucket.com/albums/v193/EvilKev/Weapons/IMG_0861.jpg
and the uppers new home (until I armbend KAC for a lower ;) )
and get one of Magpuls new stocks
http://img.photobucket.com/albums/v193/EvilKev/Courses/ContractorDriving427.jpg
http://i38.photobucket.com/albums/e118/michealj88/IMG_0314Large.jpg
http://img.photobucket.com/albums/v336/k9dpd/100_0202.jpg
http://img.photobucket.com/albums/v336/k9dpd/updatedcamo.jpg
Snapped a new pic of mine tonight:
BCM Middy upper
ML2 in a LT mount
Troy rear sight & sling
http://home.off-road.com/~loknlod/Midlength.jpg
Robb Jensen
07-21-06, 22:12
http://img.photobucket.com/albums/v408/gotm4/Noveskebblnew.jpg
http://img.photobucket.com/albums/v408/gotm4/Noveskebblnew2.jpg
Shortened Noveske Afghan. It's my wifes (9x19 on these forums) and the most accurate rifle in our house.
EliteA4Aggie
07-22-06, 14:36
http://i84.photobucket.com/albums/k34/aggiebob07/DSC00037.jpg
Here's a couple...;)
http://www.huntingpictures.net/data/560/95P8070035_Large_.JPG
http://www.huntingpictures.net/data/560/95P4300071_Large_.JPG
Linea_de_Fuego
07-23-06, 20:58
http://img240.imageshack.us/img240/465/ar15rangebager3.jpg
Ok, just getting switched on to the whole mid-length thing. A couple questions...
Nitrox, can you throw out some data on your build? It looks like a non-16" barrel, can you confirm?
Jeff, is that dremel work on your TD rail covers? If so, did you have any particular method??
Thanks...
Jeff, is that dremel work on your TD rail covers? If so, did you have any particular method??
Thanks...
I use a hack saw and a miter box (at least that's what I think it's called). Helps cut them straight, I then use the sanding wheel on a dremmel to smooth out the rough edges and take off a little more material if needed.
Hope this helps
A miter box looks like this:
http://s7.sears.com/is/image/Sears/00936317000?rgn=0,0,640,640&scl=2.56&fmt=jpeg
I just put the Tango Down rail pannel in the box with a mark on it where I need to cut it and use the saw / miter box to make a straight cut.
EliteA4Aggie
07-30-06, 16:53
http://i84.photobucket.com/albums/k34/aggiebob07/DSC00111.jpg
http://i84.photobucket.com/albums/k34/aggiebob07/DSC00114.jpg
http://img312.imageshack.us/img312/8765/p5270002jo9.jpg
http://img312.imageshack.us/img312/3583/p6070005mx5.jpg
http://www.adcofirearms.com/junkpics/kit_carbine_quiet.jpg
EliteA4Aggie
08-04-06, 20:48
got my CTR this morning
http://i84.photobucket.com/albums/k34/aggiebob07/DSC00134.jpg
http://i84.photobucket.com/albums/k34/aggiebob07/DSC00135.jpg
http://i84.photobucket.com/albums/k34/aggiebob07/DSC00136.jpg
Lefty midlength
http://img104.imageshack.us/img104/9324/left2202carrystickpj9.jpg
http://img104.imageshack.us/img104/6305/leftacog2stickun2.jpg
-Stag Arms complete upper and lower
-Sabre Defense chrome lined govt profile mid-length barrel
LaRue 9.0 rail
-LaRue Surefire light mount
-Larue Aimpoint Mount
-LaRue BUIS
-Tango Down foliage green rail pannels, verticle foregrip, and Battle grip
-Vltor foliage green carbine stock
-Blue Force Gear foliage Green Vickers sling
-Surefire Scout Light
-Aimpoint ML2
-Magpul enhanced trigger guard and Ranger plate
http://www.coloradoshooting.org/usmc03%20fg1.jpg
http://www.coloradoshooting.org/usmc03%20fg2.jpg
http://www.coloradoshooting.org/usmc03%20fg3.jpg
http://www.coloradoshooting.org/usmc03%20fg4.jpg
The weather was just right for taking pics last weekend, so I took some better quality pics of most of my guns. Enjoy:
Complete Stag Arms gun with Rock River Arms Mid-Length barrel (custom countour under the handguards by www.adcofirearms.com .... countoured to .690").
Magpul MIAD pistol grip, CavArms C6 M4 profile (no taper) handguards, Colt M4 side sling mount, LaRue Tactical BUIS and Aimpoint mount, Aimpoint ML2, Vltor Carbine Stock, and Blue Force Gear Vicker's Sling:
http://www.coloradoshooting.org/usmc03%20sml1s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml2s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml3s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml4s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml5s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml6s.jpg.jpg
http://i6.photobucket.com/albums/y232/Alpha-Romeo3/Hunting/colt6721operatormid-PS2.jpg
My Colt AR6721 with Operator mid-length, mid-weight contour, 1/7, chrome lined, M4 feedramps, Rock Creek barrel (Denny's Guns/ Global Tactical Supply), Phoenix FS, LaRue 9.0, TD panels & VFG, KNS pins, Colt M16 BCG with Wolff extractor spring, Stag Arms ambi selector, Norgon ambi mag catch, Magpul MIAD grip & enhanced trigger guard, Vltor club foot modstock group, D&H mag with Magpul & Wolff components, Aimpoint M2 with KAC straight high QR mount, KAC 300m BUIS, Surefire M961C tac light, Specter Gear CAR mag pouch and Blue Force Gear IDF style two point sling.
http://i6.photobucket.com/albums/y232/Alpha-Romeo3/Hunting/Colt6721Operator-TroyBUIS-1-MD.jpg
http://i6.photobucket.com/albums/y232/Alpha-Romeo3/Hunting/Colt6721Operator-TroyBUIS-2-MD.jpg
http://i6.photobucket.com/albums/y232/Alpha-Romeo3/Hunting/COLTAR6721-TROYFDEBUIS-UP-MD.jpg
Updated with FDE Troy BUIS
Cyclic240B
09-01-06, 00:22
http://theconnzzzz.net/middy_8-10-2006_0002.jpg
http://theconnzzzz.net/middy_8-10-2006_0013.jpg
http://theconnzzzz.net/middy_8-10-2006_0006.jpg
http://theconnzzzz.net/middy_8-10-2006_0011.jpg
Took some updated pics a couple weeks ago. The weather was just right. Shows the true color of the green much better than my last set of pics:
Bushmaster Mid-Length:
-Complete Bushmaster (minus the barrel)
-Armalite Chrome Lined Mid-Length barrel (gov't profile)
-LaRue 9.0 rail system
-Tango Down rail pannels
-Tango Down vertical foregrip
-Trijicon TA11 ACOG
-LaRue ACOG Mount
-Troy Industries Dual Apeture BUIS
-Tango Down Battle Grip pistol grip
-KNS non-rotating hammer / trigger pin set
-Magpul M93B stock
-Magpul Enhanced Trigger Guard
-Blue Force Gear Vickers (VCAS) Sling (moved the sling swivel just forward of the delta ring after the pics were taken)
http://www.coloradoshooting.org/usmc03%20bmod1s.jpg
http://www.coloradoshooting.org/usmc03%20bmod2s.jpg
http://www.coloradoshooting.org/usmc03%20bmod3s.jpg
http://www.coloradoshooting.org/usmc03%20bmod4s.jpg
http://www.coloradoshooting.org/usmc03%20bmod5s.jpg
http://www.coloradoshooting.org/usmc03%20bmod6s.jpg
Took some new pics under better lighting conditions:
-Stag Arms complete upper and lower
-Sabre Defense chrome lined govt profile mid-length barrel
LaRue 9.0 rail
-LaRue Surefire light mount
-Larue Aimpoint Mount
-LaRue BUIS
-Tango Down foliage green rail pannels, verticle foregrip, and Battle grip
-Vltor foliage green carbine stock
-Blue Force Gear foliage Green Vickers sling
-Surefire Scout Light
-Aimpoint ML2
-Magpul enhanced trigger guard and Ranger plate
http://www.coloradoshooting.org/usmc03%20new%20fg1s.jpg
http://www.coloradoshooting.org/usmc03%20new%20fg2s.jpg
http://www.coloradoshooting.org/usmc03%20new%20fg3s.jpg
http://www.coloradoshooting.org/usmc03%20new%20fg4s.jpg
Stag Arms Coyote Mid-Length:
-Complete Stag Arms (minus the barrel)
-Rock River Arms Chrome Lined Mid-Length barrel custom countoured to .690" under the handguards
-LaRue 9.0 rail system
-Tango Down rail pannels
-Tango Down vertical foregrip
-Trijicon TA11 ACOG
-LaRue ACOG Mount
-Troy Industries Dual Apeture BUIS
-Tango Down Battle Grip pistol grip
-KNS non-rotating hammer / trigger pin set
-Magpul M93B stock
-Magpul Enhanced Trigger Guard
http://www.coloradoshooting.org/usmc03%20stagc1s.jpg
http://www.coloradoshooting.org/usmc03%20stagc2s.jpg
http://www.coloradoshooting.org/usmc03%20stagc3s.jpg
http://www.coloradoshooting.org/usmc03%20stagc4s.jpg
Anyone want to add to this?
Bread is People
08-09-09, 12:34
I'd like to see some setups with the sabre 14.5" midlength barrel, if anyone has got one.
theJanitor
08-09-09, 14:00
Noveske 13.7 midlength with KX3
http://i60.photobucket.com/albums/h30/grandprixboy/AR15/forsale021.jpg
Outlander Systems
08-11-09, 17:17
Is Noveske still making the Infidel barrel? Is it available by itself, or is it only available on a complete upper?
Rock-N-Ruin
08-28-09, 11:50
A little different background
http://i12.photobucket.com/albums/a233/Rock-N-Ruin/middy2.jpg
http://i278.photobucket.com/albums/kk99/USMC03_photos/Pat%20Rogers%202009/DPP_0002.jpg
http://i278.photobucket.com/albums/kk99/USMC03_photos/Monthly%20Rifle%20Matches/DPP_0036-1.jpg
http://i278.photobucket.com/albums/kk99/USMC03_photos/Monthly%20Rifle%20Matches/IMG_2106_1.jpg
http://www.azbattlerifles.com/images/krylon2.jpg
http://www.545ar.com/TR24.jpg
http://i497.photobucket.com/albums/rr335/redyak3/First%20BR%20Build/002-3.jpg
FromMyColdDeadHand
08-29-09, 12:36
http://images2c.snapfish.com/232323232%7Ffp536%3A5%3Enu%3D3358%3E668%3E385%3EWSNRCG%3D33365%3A7368336nu0mrj
This is my rifle, there are fifty like it but this one is mine.
Noveske MPLA Recce Rifle
Swapped out black for FDE furniture (took me awhile to find a allen wrench long enough to take off the MAID Grip).
Tango Down VFG
Harris Bipod with Larue Mount (Just have it on for zeroing and taking some pics)
Aimpoint T-1 with Larue Mount
VLTOR QD Offset Light Mount with 6P LED Surefire Light
Mine
DDM4 with 12" lite rail
DD middy barrel and gasblock
various 3rd party bits
http://www.pbase.com/shadco/image/115385559.jpg
http://www.pbase.com/shadco/image/115385561.jpg
http://www.pbase.com/shadco/image/115435502.jpg
bnanaphone
09-01-09, 13:27
Shad,
How do you like the FSC brake on your middie? I just put one on mine but have yet to shoot it. Just looking for the faster recovery time......and it looks better than the stock FH.
kaiservontexas
09-01-09, 15:37
http://i725.photobucket.com/albums/ww256/crusaderwyn/Projekt%20AR/DSC01689.jpg
Fire_Medic
09-01-09, 20:21
No where near as fancy as the others in this thread but it's a start. This is my Full BCM Mid - Length build:
BCM Middy upper
Tan Handguards
BCM Charging Handle
BCM F/A BCG
Troy Rear flip up BUIS with BCM logo
BCM complete lower
Magpul Miad FDE
Viltor EMOD FDE
BFG VCAS Sling FDE (not pictured)
30 Round Black PMAGS w/ FDE Ranger Floor Plates
http://i325.photobucket.com/albums/k366/ffgabe/BCMFDE2.jpg
http://i278.photobucket.com/albums/kk99/USMC03_photos/Pat%20Rogers%202009/DPP_0002.jpg
I know this a AR thread, but what brand of hoodie is that your wearing?
PrivateCitizen
09-06-09, 03:17
I know this a AR thread, but what brand of hoodie is that your wearing?
Might be a TAD
TAD Pathfinder Hoodie (http://www.tadgear.com/shop.php?id=594)
http://i33.photobucket.com/albums/d97/kjd2121/_D203418.jpg
http://i33.photobucket.com/albums/d97/kjd2121/_D203421.jpg
http://i33.photobucket.com/albums/d97/kjd2121/_D203424.jpg
Just finished mine today!
BCM Mid-length Upper
Daniel Defense Lite 9.0
Magpul XTM Panels
AAC Blackout Flash Hider
Bobro Shorty Vertical Grip
Aimpoint H-1 W/ ADM Mount
Burris AR Tripler W/ Larue Pivot Mount
Magpul Rear BUIS
Fenix TK12 R2 W/Larue Mount
Young MFG National Match Bolt Carrier
MEGA Billet Lower
Magpul B.A.D.
KNS Anti-rotation pins Gen 2
MIAD Grip
Magpul ASAP SLing Point
VLTOR E-Mod Stock
http://lh6.ggpht.com/_nhPHd8sDdls/SqiBGf9cGdI/AAAAAAAAOR8/L2ZAs5DYo5s/s800/DSC_3546.JPG
http://lh6.ggpht.com/_nhPHd8sDdls/SqiBGwWiwnI/AAAAAAAAOSI/Eun2juvda3k/s800/DSC_3550.JPG
Cincinnatus
09-10-09, 08:31
Just finished mine today!
BCM Mid-length Upper
Daniel Defense Lite 9.0
Magpul XTM Panels
AAC Blackout Flash Hider
Bobro Shorty Vertical Grip
Aimpoint H-1 W/ ADM Mount
Burris AR Tripler W/ Larue Pivot Mount
Magpul Rear BUIS
Fenix TK12 R2 W/Larue Mount
Young MFG National Match Bolt Carrier
MEGA Billet Lower
Magpul B.A.D.
KNS Anti-rotation pins Gen 2
MIAD Grip
Magpul ASAP SLing Point
VLTOR E-Mod Stock
Looks good! Where did you get that Burris Ar Tripler? Haven't heard they had one before. Is it water and shock proof? How's the eye-relief?
Looks good! Where did you get that Burris Ar Tripler? Haven't heard they had one before. Is it water and shock proof? How's the eye-relief?
You can get it from optics planet and a few dozen other retailers. I picked mine up locally because I wanted to see it.
The packaging claims that it is waterproof, shockproof and fog resistant. The truth of these claims is unknown to me, as I do not see any specific ratings.
The eye relief seems to be 1-2 inches, which is okay, but could be much better. I looked at an Aimpoint 3x in the store and it appeared to have better glass and an eye relief of 2-3 inches. At 2.5X the price, it had better though.
The AR Tripler does have a nice feature of elevation and windage adjustment knobs. If your red dot is lower or higher than the AR Tripler, the knobs allow you to adjust your red dot to the center of the field of view.
The knobs also make the overall shape kind of odd. The Aimpoint 3x has the advantage as far as ergonomics, as it would fit your hand better when moving it out of the way.
It think the AR Tripler was a good value. Would I rather have the Aimpoint 3x? If price were no object, then yes. If it were $100 more, then yes. If it were $300 more (Which it is), then I cannot personally justify the difference in cost when it does the exact same thing. YMMV
SPARTAN HOPLITE ARMS
09-10-09, 12:35
The weather was just right for taking pics last weekend, so I took some better quality pics of most of my guns. Enjoy:
Complete Stag Arms gun with Rock River Arms Mid-Length barrel (custom countour under the handguards by www.adcofirearms.com .... countoured to .690").
Magpul MIAD pistol grip, CavArms C6 M4 profile (no taper) handguards, Colt M4 side sling mount, LaRue Tactical BUIS and Aimpoint mount, Aimpoint ML2, Vltor Carbine Stock, and Blue Force Gear Vicker's Sling:
http://www.coloradoshooting.org/usmc03%20sml1s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml2s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml3s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml4s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml5s.jpg.jpg
http://www.coloradoshooting.org/usmc03%20sml6s.jpg.jpg
Forgive me for interjecting, but what are those little bars on either side of the lower receiver covering the pin holes? I'm thinking they're anti-rotation pins but I wasn't sure. Who makes that model and what does it help with? :confused:
Turbo Supra
09-10-09, 13:05
Mega M4 upper receiver
Mega billet charging handle
Young NM M16 chrome BCG
CMMG 14.5" 1/7 midlength barrel
YHM Phantom 5C1, pinned
MI 9.0" free-float handguards
Mega lower receiver
CMT parts kit
CMT ambi safety
Oberland Arms trigger guard
Vltor Modstock
Vltor extension, carbine buffer
TangoDown BattleGrip
TA31RCO-M4 ACOG (for sale)
LaRue LT100 mount
GG&G rear BUIS
Surefire G2
Vltor Scout mount
KAC vertical grip
Magpul rail ladders
http://www.imageviper.com/displayimage/132107/0/arstand.jpg
http://www.imageviper.com/displayimage/107938/0/oberland2.JPG
http://www.imageviper.com/displayimage/140360/0/mega_2.jpg
Cincinnatus
09-11-09, 10:51
Here are some pics of the BCM Middy assembled.
http://i586.photobucket.com/albums/ss301/winfield813/DSCF7045.jpg
http://i586.photobucket.com/albums/ss301/winfield813/DSCF7046.jpg
http://i586.photobucket.com/albums/ss301/winfield813/DSCF7047.jpg
http://i586.photobucket.com/albums/ss301/winfield813/DSCF7048.jpg
I have since put a Troy MRF-9 rail on it and highly recommend this rail system to all. The worksmanship is outstanding. It is very easy to install--you don't have to remove the barrel nut, FH, or front sight assembly, and it is rock solid when complete. I will try to post pics of the rail system installed soon. Thanks, Grant!
Cincinnatus
09-11-09, 12:54
http://i725.photobucket.com/albums/ww256/crusaderwyn/Projekt%20AR/DSC01689.jpg
Great tapestry/rug! Where did you get it? Afghanistan? Iraq?
Cincinnatus
09-11-09, 13:00
The Magpul UBR stock seems to be the most popular stock on this thread. Anyone know who has them in stock?
I think it would be great to have a stock with the cheekweld in the same place everytime--on a standard carbine stock, I always end up with my cheek on the receiver extension instead of the stock when the stock is fully extended. The LMT SOPMOD seems to be better about this than a regular carbine, but the UBR looks great!
PrivateCitizen
09-11-09, 15:47
Forgive me for interjecting, but what are those little bars on either side of the lower receiver covering the pin holes? I'm thinking they're anti-rotation pins but I wasn't sure. Who makes that model and what does it help with? :confused:
They are (or look like) first gen KNS anti-rotation pins.
They do just that, keep the pins from sliding out.
Is it a 'problem' if you don't have them? Probably not. But it can prevent one from occurring. $29 piece of mind.
On that, USMC03, how are you liking the LaRue BUIS with your M3? Considering it myself or a Daniel A1.5.
On that, USMC03, how are you liking the LaRue BUIS with your M3? Considering it myself or a Daniel A1.5.
That picture was taken in early 2006, I sold that carbine a couple years ago. I have been running T1's / Comp M4's for the last 18 months or so.
That being said, I never had a problem running a LaRue BUIS with a Aimpoint ML2, ML3, Micro T1, or Comp M4 / M4S
http://i278.photobucket.com/albums/kk99/USMC03_photos/03%20Design%20Group-BCM/DPP_0013copy.jpg
LaRue BUIS with a Aimpoint Micro T1 (it's a mid-length ;) ):
http://i278.photobucket.com/albums/kk99/USMC03_photos/03%20Design%20Group-BCM/DPP_0032copy-1.jpg
gruntinhusaybah
09-15-09, 00:38
are those UDE PMAGS? and to stay on topic a BCM BFH middy on a DD lower:
http://i15.photobucket.com/albums/a355/lecherojr/sckool004.jpg
cmmg middy barrel, VTAC, territorial gunsmiths lower, Surefire muzle brake
http://i15.photobucket.com/albums/a355/lecherojr/Picture022.jpg
That picture was taken in early 2006, I sold that carbine a couple years ago. I have been running T1's / Comp M4's for the last 18 months or so.
That being said, I never had a problem running a LaRue BUIS with a Aimpoint ML2, ML3, Micro T1, or Comp M4 / M4S
http://i278.photobucket.com/albums/kk99/USMC03_photos/03%20Design%20Group-BCM/DPP_0013copy.jpg
What multicam rig is that? I like the split front w/ hydration pack. Thanks.
What multicam rig is that? I like the split front w/ hydration pack. Thanks.
The rig posted above is the 03 MSF Chest Harness. It will be coming out very soon from www.bravocompanyusa.com and www.bravocompanymfg.com
A review will be posted in the Tactical Gear section in the next week or two.
Info on the 03 MSF Chest Harness is at: http://www.bravocompanymfg.com/SearchResults.asp?Cat=24 and should be up on the Bravo Company USA website in the New Products section shortly.
http://i278.photobucket.com/albums/kk99/USMC03_photos/03%20Design%20Group-BCM/DPP_0005copy.jpg
longrange18
09-25-09, 16:15
LaRue BUIS with a Aimpoint Micro T1 (it's a mid-length ;) ):
http://i278.photobucket.com/albums/kk99/USMC03_photos/03%20Design%20Group-BCM/DPP_0032copy-1.jpg
How does this rifle balance out with the Vltor carbine stock?
Fire_Medic
09-27-09, 19:01
My BCM middy coming along........
http://i325.photobucket.com/albums/k366/ffgabe/BCM.jpg
kaiservontexas
09-27-09, 20:33
Great tapestry/rug! Where did you get it? Afghanistan? Iraq?
A friend, my back kept me out of the .mil. :(
SPARTAN HOPLITE ARMS
09-28-09, 12:20
The rig posted above is the 03 MSF Chest Harness. It will be coming out very soon from www.bravocompanyusa.com and www.bravocompanymfg.com
A review will be posted in the Tactical Gear section in the next week or two.
Info on the 03 MSF Chest Harness is at: http://www.bravocompanymfg.com/SearchResults.asp?Cat=24 and should be up on the Bravo Company USA website in the New Products section shortly.
http://i278.photobucket.com/albums/kk99/USMC03_photos/03%20Design%20Group-BCM/DPP_0005copy.jpg
Can the harness be removed from that rig? I.E. does it have fastex type buckles on the front where the harness attaches to the chest panels or is it sewn in?
bnanaphone
09-29-09, 12:21
My BCM, Magpul, Larue rifle
BCM mid-length upper
BCM lower
MIAD grip
ACS stock
MBUS
ASAP + MS2
Larue 12" FF rail
FSC556
Bobro cantilever, lower 1/3
Aimpoint ML3
spamsammich
09-29-09, 13:07
My latest creation, built off a Afghan barrel and N4 lower. I really am done for a while, I swear!
http://web.me.com/supermarkus/iWeb/Site/Noveske%20Afghan%20build_files/IMG_1942.jpg
My latest creation, built off a Afghan barrel and N4 lower. I really am done for a while, I swear!
http://web.me.com/supermarkus/iWeb/Site/Noveske%20Afghan%20build_files/IMG_1942.jpg
How can you be done?......still needs a light:D
spamsammich
09-29-09, 15:43
Got one, just not pictured. Also wears a po'boy and larue mount some days.
Sorry for the delayed response....Been kind of busy :cool:
How does this rifle balance out with the Vltor carbine stock?
The EMOD balances well with the mid-length
Can the harness be removed from that rig? I.E. does it have fastex type buckles on the front where the harness attaches to the chest panels or is it sewn in?
Yes the yoke can be removed from the body of the harness. The yoke attaches to the body via an A strap set up, that is adjustable (can can be removed) via a tri-glide buckle. Look closely in the pic and you can see what I'm refering to.
PrivateCitizen
09-30-09, 16:34
http://web.me.com/supermarkus/iWeb/Site/Noveske%20Afghan%20build_files/IMG_1942.jpg
DD Lite 10.0?
spamsammich
09-30-09, 17:07
DD Lite 10.0?
bingo.
SPARTAN HOPLITE ARMS
10-11-09, 20:08
[QUOTE=USMC03;464056]Sorry for the delayed response....Been kind of busy :cool:
The EMOD balances well with the mid-length
Yes the yoke can be removed from the body of the harness. The yoke attaches to the body via an A strap set up, that is adjustable (can can be removed) via a tri-glide buckle. Look closely in the pic and you can see what I'm refering to.[/QUOTE
Not a bad setup then. I would prefer if it had QD buckles but it's a pretty good setup for courses and includes hydration as well. I'm torn between this and the ATS M4 harness..I'd plan to add some pouches for pistol mags but I'd have to spend money on a hydration pack for the ATS. It'll probably come out close to the same price but the BCM looks nicer and I like the split front.
BCM Middy on Colt 6920 lower
http://img.photobucket.com/albums/v646/symr00/DSCI0011.jpg?t=1257708603
http://i886.photobucket.com/albums/ac61/gstuffnow/AR15DDSPRL.jpg
http://i886.photobucket.com/albums/ac61/gstuffnow/AR15DDSPRR.jpg
From my 'build' thread:
http://img109.imageshack.us/img109/64/img1508.jpg
longrange18
05-19-10, 15:30
Thought I would bring this thread back to life.
http://img375.imageshack.us/img375/1219/ar003.jpg
BCM mid-length upper
Cav Arms C8 hand-guards(for now; will get MOE once released)
DD 1.5 Rear sight
MOE stock
Magpul ASAP
Stag Lower w/Stag LPK
MOE grip
and plenty of PMAG's and ammo
Simple but effective non the less.
Thought I would bring this thread back to life.
Good idea!
16" Mid
http://bellsouthpwp.net/e/d/edwin907/_A216535.jpg
14.5" SBR Mid
http://bellsouthpwp.net/e/d/edwin907/_1317113.jpg
http://farm5.static.flickr.com/4033/4585210124_9db1b846c2_b.jpg
longrange18
05-20-10, 04:07
Good idea!
16" Mid
http://bellsouthpwp.net/e/d/edwin907/_A216535.jpg
14.5" SBR Mid
http://bellsouthpwp.net/e/d/edwin907/_1317113.jpg
http://farm5.static.flickr.com/4033/4585210124_9db1b846c2_b.jpg
OUCH! You guys cut me deep with that follow up. My gun looks like a shrimp. Awesome blasters. I can decipher the outsides; what are you guys hiding under the rails?
http://i278.photobucket.com/albums/kk99/USMC03_photos/Bravo%20Company%20Mid-Length/IMG_0158001_.jpg
OUCH! You guys cut me deep with that follow up. My gun looks like a shrimp. Awesome blasters. I can decipher the outsides; what are you guys hiding under the rails?
My Recce is a Daniel Defense complete upper, this was built by DD before they were making barrels or rifles and has a 16" mid-length Lothar Walther LW50 barrel, with a Wylde chamber. Sub MOA accuracy and nice and light due to the contour. Probably my favourite.
Cameron
http://farm5.static.flickr.com/4059/4585211700_50d5885572_b.jpg
Cameron has such beautiful rifles, purposeful as a razor's edge! Form definitely follows function.
My 16" has a terrific Krieger mid length SS 1/7 barrel (JTAC, few yaers ago) machined for the OPS 12th. It has zero POI shift hot/cold, clean/dirty, suppressed/or not. Accuracy rivals my Krieger 18" SPR Mod0's barrel, but is a lightweight contour and is my favorite rifle. Fairly tight chamber I suspect, but never a failure with MK262, 5.56 75gr T2, BHBB 75gr, Q3131A or Win/LC/IMI M855. Took about 120 rounds, but it surprised me when it went from a MOA shooter to a 1/2 MOA shooter at that point.
The 14.5" is a WOA SS "Recon Scout" 1/7 twist mid-length, CLE machined from a Wilson match blank. Heavy at the chamber, then fluted under the handguards it is very handy and has excellent accuracy with a variety of ammo, equalling my old Noveske heavy Afgan with 75/77gr ammo, and outshooting it with 55/62gr military loads. The downside is POI shift when mounting the SpecWar2 suppressor, but the shift is consistent and repeatable, directly down to 6 o'clock.
http://lh3.ggpht.com/_bQdMkpXilRw/Sx81p6PcHpI/AAAAAAAADZU/amT8PDQfDF4/FINISHED_AR_2.jpg
http://lh4.ggpht.com/_bQdMkpXilRw/Sx81rRdD4DI/AAAAAAAADZk/XGl80RgZMhk/FINISHED_AR_6.jpg
http://lh3.ggpht.com/_bQdMkpXilRw/S3oBnmcmHII/AAAAAAAAEAI/gTLydmr-98U/22%20and%20Big%20Brother_resize.JPG
With the 22 dedicated Upper below
tr1kstanc3
05-21-10, 23:21
http://farm5.static.flickr.com/4003/4508897744_84c963c1d4_b.jpg
longrange18
05-22-10, 03:50
http://farm5.static.flickr.com/4003/4508897744_84c963c1d4_b.jpg
What optic is that?
http://i46.tinypic.com/ru1zih.jpg
Mega billet upper and lower
DD CHF 16" middie
YHM lopro block
Osprey mid-length piston
MI rifle length piston ready FF rail
MOE grip
milspec CTR
DD LPK
ambi selector and mag release
YHM suppressor ready phantom FH
Troy HK BUIS
XTM and ladders
ACOG 3.5 X 35 TA11F
TacMedic556
05-22-10, 22:34
Yeah, sorry about that. I posted pretty hastily on that one. Was excited to show off the build.
Dos Cylindros
05-23-10, 11:55
COLT LE6920 WITH:
Smith Vortex Flash Hider
Tango Down grip
Magpul M.O.E For-end
Magpul Enhanced Trigger Guard
Magpul Mags
VLTOR Club Stock
VLTOR Gunfighter Charging handle
KNS Pins
Aimpoint M3 On LaRue Mount
Larue QD sling swivel (rear)
Daniel Defense QD sling swivel on Rail plate (front).
Troy Di-optic rear BUIS
Sprinco "Blue" Recoil/buffer Spring. (Kept the H1 Buffer In).
Sprinco Extractor Spring
Vickers Blue Force Tactical Sling (not shown).
Recently ordered a Nickel Boron BCG coated by Fail Zero for Spikes Tactical. It is a true M16 BCG. The one from the Colt will be my "spare".
Great pics above. All of you...NICE BUILDS!
Nice, but not a middy.
BCM BFH upper with Troy Drop-in, Free-float, FDE rails on a Double star lower with RRA LPK. Needs optics.
http://i37.photobucket.com/albums/e98/isa268/IMG_0121web.jpg
Mega Gator Lower
RRA National Match LPK
KNS Anti Rotational Pins
Magpul B.A.D. Lever
Magpul M.I.A.D grip
Magpul MOE Trigger guard
Magpul AFG
Daniel Defense 12" Rail
CMMG 16" Govt profile Barrel
YHM Phanton Flash Hider
BCM Bolt & Carrier group
PRI Gas Buster
Troy FDE Battle sites
Aimpoint ML3 w/ LaRue LT-129 mount
Gear Sector G2 Light Mount
Surefire G2 LED
Gear Sector Gen 2 ASP sling
Magpul XTM and ladder rail covers
http://i159.photobucket.com/albums/t124/tzoid08/NewFurniture007.jpg
http://i159.photobucket.com/albums/t124/tzoid08/NewFurniture005.jpg
http://i159.photobucket.com/albums/t124/tzoid08/NewFurniture006.jpg
http://photos.imageevent.com/smglee/ca/huge/P1040449.JPG
Centurion Arms mid length hammer forged barrel, 16.1inches, 1:7 twist, double chrome lined with M4 feed ramps.
snakedoctor
05-23-10, 22:49
http://photos.imageevent.com/smglee/ca/huge/P1040449.JPG
Centurion Arms mid length hammer forged barrel, 16.1inches, 1:7 twist, double chrome lined with M4 feed ramps.
what saftey and mag release is that?
Mega Gator Lower
RRA National Match LPK
KNS Anti Rotational Pins
Magpul B.A.D. Lever
Magpul M.I.A.D grip
Magpul MOE Trigger guard
Tango Down short VFG
Daniel Defense 12" Rail
CMMG 16" Govt profile Barrel
YHM Phanton Flash Hider
BCM Bolt & Carrier group
PRI Gas Buster
Troy FDE Battle sites
Aimpoint ML3 w/ LaRue LT-129 mount
Gear Sector G2 Light Mount
Surefire G2 LED
Gear Sector Gen 2 ASP sling
Magpul XTM and ladder rail covers
Does this setup/mount allow for Co-witness on center or lower third?
Doing work...
http://i276.photobucket.com/albums/kk3/testudo13/PICT0014.jpg
Bravo Company 16" middy
LaRue rails
TD stubby vert-grip (no longer using a vert-grip)
Aimpoint T-1
Magpul MOE grip
Vltor stock
Pmag
VTac sling
Does this setup/mount allow for Co-witness on center or lower third?
Perfect Co-witness Center........
~~~ USMC03 - which larue handguard is that, is it a larue? i'm sorry but what length is that please? it looks amazing!
http://i278.photobucket.com/albums/kk99/USMC03_photos/Bravo%20Company%20Mid-Length/IMG_0158001_.jpg
longrange18
05-24-10, 18:02
~~~ USMC03 - which larue handguard is that, is it a larue? i'm sorry but what length is that please? it looks amazing!
It's a Larue Tactical 12.0 rail.
It's a Larue Tactical 12.0 rail.
thank you longrange18
tr1kstanc3
05-25-10, 15:55
What optic is that?
Weaver Classic Extreme.
Cameron has such beautiful rifles, purposeful as a razor's edge! Form definitely follows function.
I appreciate the compliment, but I'm trying to play catch up to your extensive premium arsenal!!!
Cameron
http://img.photobucket.com/albums/v512/underlourd/DSC_5824.jpg
BCM 16" Mid-Length Upper
S&W Stripped Lower w/ Stag LPK
BCM M16 BCG
BCM Gunfighter Mod 4
Car Buffer
Tactical Springs Buffer Spring
Magpul MOE Stock
Magpul Enhanced Trigger Guard
Magpul MOE Grip
Magpul MBUS
Magpul PMAG
Lucid HD7 w/ 2x Magnifier
Jeff Franz
05-25-10, 19:30
http://i557.photobucket.com/albums/ss15/jaf0206/063-1.jpg
http://i557.photobucket.com/albums/ss15/jaf0206/079.jpg
http://fototime.com/615E688002D9FF7/standard.jpg
http://fototime.com/50E226B00D22767/standard.jpg
http://fototime.com/7B2F32EDAEBA571/standard.jpg
http://fototime.com/FB5673ED90E8D6D/standard.jpg
http://fototime.com/5743C87DBB6870C/standard.jpg
ETA just finished this middy 14.5" sabre etc.
http://fototime.com/B008CF528A6A521/standard.jpg
KISS middy, BCM 14.5 on a DD lower.
http://i1005.photobucket.com/albums/af174/marco1144/AR/DSCN0392.jpg
Fire_Medic
06-01-10, 17:21
In a rebuilding phase, got the UBR and a T1 in today. Now just waiting for the new upper:
http://i325.photobucket.com/albums/k366/ffgabe/IMG_1915.jpg
Pretty basic compared to you guys!
Brick
http://www.hunt101.com/data/500/DSC03143.JPG
http://www.hunt101.com/data/500/DSC03149.JPG
NavyDavy55
06-05-10, 06:30
A BCM middy on a Aero Precision lower.
N4 Light Recce upper built onto a Noveske cosmetic 2nd lower.
http://farm5.static.flickr.com/4023/4336134773_7a59fd8fa6_b.jpg
RRA midlength, cerekoted after 10k rounds
EoTech 557 w/ 3x mag (hate the a.r.m.s. mount)
Surefire G2Z w/LaRue mount
CAA vert grip
Magpul CTR stock
GG&G BUIS
MI single pt sling adapter
http://i868.photobucket.com/albums/ab244/flashgrdn22/gun%20stuff/DSC00479.jpg
Built a Mid-Length SPR using an LRB Lower and Timney 4LB trigger. Bought an 18" Ultra-Match Upper from Rainier. Troy BUIS were added after these pics. Scope is a Leupold 6.5x20 Target model in a LaRue QD mount.
http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/AR-15/IMG_0944RainierSPRUltraMatch-Large.jpg
http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/AR-15/IMG_0952RagansSPRWithScope.jpg
My newest, picked up today. The previous owner had it built but never fired it.
Upper
•16” Sabre Defence 1:7 Government Profile Barrel
• Mid-length gas system
• Bravo Company Bolt and Carrier
• Daniel Defence Upper Receiver
• Daniel Defence 12.0 FSPM M4 Rail
• Gas Buster Charging Handle
• Vltor Flash Hider
• Troy Rear BUIS
• Trijicon TA33R-8 ACOG
Lower
• Stag Lower
• Stag Lower Parts Kit
• Magpul MIAD Grip
• Magpul Trigger Guard
• KNS Anti Spin Trigger and Hammer Pins
• Magpul UBR Stock
http://i16.photobucket.com/albums/b17/Master-G/AR_7_June-d.jpg
http://i16.photobucket.com/albums/b17/Master-G/AR_7_June-c.jpg
Belmont31R
06-07-10, 22:23
http://i274.photobucket.com/albums/jj245/BM31R/6113a077.jpg
http://i39.tinypic.com/6sditv.jpg
dancinzen@hotmail.com
06-08-10, 19:02
cant wait to get my bcm 14.5 middy! all your pics are making my mouth water!
My 6.8 Mega MTS-300 middy:
http://i497.photobucket.com/albums/rr335/redyak3/First%20BR%20Build/black%20rifle2/007-3.jpg
BCM 16" SS410 Mid-Length w/ LaRue 12.0:
http://i278.photobucket.com/albums/kk99/USMC03_photos/Monthly%20Rifle%20Matches/IMG_4724001_copy.jpg
http://i278.photobucket.com/albums/kk99/USMC03_photos/Monthly%20Rifle%20Matches/IMG_4742001_copy.jpg
http://i278.photobucket.com/albums/kk99/USMC03_photos/Monthly%20Rifle%20Matches/IMG_4769001_copy.jpg
longrange18
07-07-10, 03:14
BCM 16" SS410 Mid-Length w/ LaRue 12.0:
http://i278.photobucket.com/albums/kk99/USMC03_photos/Monthly%20Rifle%20Matches/IMG_4724001_copy.jpg
That sir, is beautiful. Who did the coating on the lower?
devilsdeeds
07-07-10, 07:20
I believe that's BCM's Dark Earth anodized T&E lower.
BCM 16" Midlength Lightweight Upper on a Bushmaster Lower.
Daniel Defense BUIS
Aimpoint ML2 w/Laure Mount
Surefire M600C mounted to a MI FSB rail
Older style Gear Sector 2pt sling
Colt front side sling mount pirated off a 6400C
MOE stock
http://img19.imageshack.us/img19/4101/picture113gi.jpg
tr1kstanc3
07-08-10, 18:22
BCM 16" Midlength Lightweight Upper on a Bushmaster Lower.
Daniel Defense BUIS
Aimpoint ML2 w/Laure Mount
Surefire M600C mounted to a MI FSB rail
Older style Gear Sector 2pt sling
Colt front side sling mount pirated off a 6400C
MOE stock
http://img19.imageshack.us/img19/4101/picture113gi.jpg
Nice, simple, and clean. Good job.
Nice, simple, and clean. Good job.
:cool: Thanks, exactly what I was going for.
ADCO Cruiser upper.
http://farm2.static.flickr.com/1036/4732255906_a501d3c4aa_b.jpg
SpeedRacer
07-12-10, 23:43
BCM Lightweight Midlength Upper
BCM BCG
BCM Gunfighter Mod4
Phantom 5C2 FH
Aimpoint T-1/Larue QD
Troy Battlesight
Daniel Defense Lower/Parts Kit
Geissele SSA Trigger
Magpul CTR Butt/Moe PG
http://www.thecurt.com/bcm_2.jpg
http://www.thecurt.com/bcm_1.jpg
BCM BFH 16" midlength barrel :D
http://i2.photobucket.com/albums/y41/boltcatch/carb5.jpg?t=1279182108
Cincinnatus
07-15-10, 12:25
BCM BFH 16" midlength barrel :D
http://i2.photobucket.com/albums/y41/boltcatch/carb5.jpg?t=1279182108
How much have you shot it with the mount along side the muzzle device like that? Any effect on the light? Have you tried firing it like that with the light on?
No problem with it. There isn't a direct line between the brake port and the lens of the light, and I've never had anything beyond cosmetic damage from muzzle blast hitting a pistol or rifle light. It's also not nearly as close as it looks in the picture. I've stripped and repainted it a few times but I don't recall ever seeing damage to the anodizing.
I almost always shoot with a can anyways, and the light spends just as much time, if not more, on my shotgun.
The light is mounted back on the left hand side of the rail, and it's a LaRue Battlelight, so it's not going anywhere unless I want it to.
Cincinnatus
07-15-10, 18:34
No problem with it. There isn't a direct line between the brake port and the lens of the light, and I've never had anything beyond cosmetic damage from muzzle blast hitting a pistol or rifle light. It's also not nearly as close as it looks in the picture. I've stripped and repainted it a few times but I don't recall ever seeing damage to the anodizing.
I almost always shoot with a can anyways, and the light spends just as much time, if not more, on my shotgun.
The light is mounted back on the left hand side of the rail, and it's a LaRue Battlelight, so it's not going anywhere unless I want it to.
Good to go!
First upper build.
DD 14.5 gov cfh mid
BCM upper receiver
LaRue Lo-pro block
Permed a2x
6920 lower
http://a.imageshack.us/img198/4927/img4188y.jpg (http://img198.imageshack.us/i/img4188y.jpg/) Uploaded with ImageShack.us (http://imageshack.us)
the_accuser
07-27-10, 12:16
LMT MRP with dimpled 16" midlength barrel.
http://i41.photobucket.com/albums/e251/the_accuser/b2.jpg
Another 16" midlength MRP barrel but setup for use with Ops silencers.
http://i41.photobucket.com/albums/e251/the_accuser/mrpops143.jpg
My newest, picked up today. The previous owner had it built but never fired it.
Upper
•16” Sabre Defence 1:7 Government Profile Barrel
• Mid-length gas system
• Bravo Company Bolt and Carrier
• Daniel Defence Upper Receiver
• Daniel Defence 12.0 FSPM M4 Rail
• Gas Buster Charging Handle
• Vltor Flash Hider
• Troy Rear BUIS
• Trijicon TA33R-8 ACOG
http://i16.photobucket.com/albums/b17/Master-G/AR_7_June-d.jpg
did you have to modify the Daniel Defence 12.0 FSPM M4 Rail to get it to fit the Middy system?
CMMG 16" middy...
http://i891.photobucket.com/albums/ac111/cmayo3/CMMG%20Review/IMG_6408.jpg
http://i891.photobucket.com/albums/ac111/cmayo3/CMMG%20Review/IMG_6296.jpg
http://i891.photobucket.com/albums/ac111/cmayo3/CMMG%20Review/IMG_6276.jpg
CMMG 14.5" middy...
http://i891.photobucket.com/albums/ac111/cmayo3/CMMG%2022lr%20Review/IMG_6361.jpg
http://i34.photobucket.com/albums/d124/mayoren/chris%20album/IMG_6112.jpg
http://i34.photobucket.com/albums/d124/mayoren/chris%20album/DSCN9989.jpg
http://i34.photobucket.com/albums/d124/mayoren/chris%20album/DSCN0045.jpg
SIMPLYDYNAMIC
07-27-10, 16:56
http://i278.photobucket.com/albums/kk99/USMC03_photos/Magpul%20Dynamics%20Carbine%20April%
FromMyColdDeadHand
07-27-10, 19:14
Travis' gun is so awesome it blinded my browser.
parishioner
07-27-10, 19:17
http://i602.photobucket.com/albums/tt101/jordandalleman/VTAC201.jpg
http://i602.photobucket.com/albums/tt101/jordandalleman/VTAC204.jpg
ge_traveler
07-29-10, 19:56
Big brown truck arrived today with my BCM 16" SS410 upper. Good timing as I also received my Cav Arms handguards too. This thing is sweet, can't wait for my lower to get here. Also got the BCG and Troy BUIS.
http://i394.photobucket.com/albums/pp24/ge_traveler/Upper.jpg
http://i394.photobucket.com/albums/pp24/ge_traveler/UpperReceiverBCG.jpg
http://i394.photobucket.com/albums/pp24/ge_traveler/UpperTroyBattle.jpg
http://i602.photobucket.com/albums/tt101/jordandalleman/VTAC201.jpg
http://i602.photobucket.com/albums/tt101/jordandalleman/VTAC204.jpg
16inch and 11inch VTAC? My middy might end up very similar to that one.
BCM 14.5" Upper
Stag Lower
Assorted Magpul Goodies
Troy Rear Sight
http://i48.photobucket.com/albums/f205/GaryXD/dcp_2771.jpg
parishioner
07-29-10, 21:37
16inch and 11inch VTAC? My middy might end up very similar to that one.
Yes sirrrr.
here's my newest build. its my KISS mid-length.
16" BCM middy
Magpul OD goodies
Aimpoint H-1 on a DD mount
http://i842.photobucket.com/albums/zz348/abebeau/Lightweight/DSCN0457.jpg
http://i103.photobucket.com/albums/m127/johnson_n/IMG_1962.jpg
My BCM middy with the wife's SCAR:
http://i1026.photobucket.com/albums/y322/_MacGyver-/EditA.jpg
LMT stripped upper
LMT 2-Stage lower with SOPMOD
BCM cold hammer forged 16" mid barrel assy
BCM FA BCG
Standard CH
RRA side barrel mount sling adapter
LaRue BUIS
Gear Sector 6P flashlight mount
Gear Sector SPRE-R Blackout Sling mount
Gear Sector GS-2P black sling
Surefire 6P LED
Midwest Industries rail adapter
Cav Arms C6 hadguard
BAD-A.S.S. Ambi selector
Magpul MIAD
http://i19.photobucket.com/albums/b164/cmace22/LMT-BCM002.jpg
http://i19.photobucket.com/albums/b164/cmace22/LMT-BCM003.jpg
http://i87.photobucket.com/albums/k158/mrbieler/BCMmiddy1.jpg
16.2" mid. with DD12" lite.
before Magpul Fever...
http://i762.photobucket.com/albums/xx265/smithprotection/iphonemiscpics042.jpg
http://i762.photobucket.com/albums/xx265/smithprotection/iphonemiscpics043.jpg
After Magpul got its grasp on my money clip...again....
http://i762.photobucket.com/albums/xx265/smithprotection/1264828340.jpg
http://i825.photobucket.com/albums/zz179/556mp/IMG_0972.jpg
-Centurion Light Weight 16"
-FSC556
-Troy MRF 13.8 (Soon to be TRX 11")
-BCM Bolt
-Semi Bolt Carrier
-Troy Flip Sights
-EoTech 512
-TangoDown VFG
Nugentforoffice
08-06-10, 22:44
12345
http://i704.photobucket.com/albums/ww44/buell38/DSC07057.jpg
16" BCM middy with MI SS15 free float
DocHolliday01
09-23-10, 06:41
16in Mid-length Sabre Defence
13.2 Larue Rail
http://img707.imageshack.us/img707/1442/img1752mr.jpg
BCM 14.5" mid-length
http://farm5.static.flickr.com/4137/4897586333_61d31c5517_b.jpg
Daniel Defense 16" mid-length with 12" DD Lite Rail
Bravo Company 14.5" mid-length with 12" DD Lite Rail
http://farm5.static.flickr.com/4136/4881558010_8b753f72b1_b.jpg
BCM 14.5" lightweight midlength upper reciever group.
2 lbs. 9 oz.
http://farm5.static.flickr.com/4145/5000159278_216fc1a32d_b.jpg
http://farm5.static.flickr.com/4130/4999553551_a7288a730b_b.jpg
http://farm5.static.flickr.com/4085/5005806221_8785a89660_b.jpg
http://farm5.static.flickr.com/4087/5006409408_b01fe2c42e_b.jpg
http://farm5.static.flickr.com/4112/5005798159_639d370187_b.jpg
http://farm5.static.flickr.com/4124/5005796371_2c38159e85_b.jpg
http://i704.photobucket.com/albums/ww44/buell38/DSC07382.jpg
daddyusmaximus
08-21-15, 21:29
Old thread revival. That's ok, lots of old parts on this thing.
http://i219.photobucket.com/albums/cc306/daddyusmaximus/Guns/SPR%20on%20flag_zpswk5xqzl5.jpg (http://s219.photobucket.com/user/daddyusmaximus/media/Guns/SPR%20on%20flag_zpswk5xqzl5.jpg.html)
Spikes Tactical 16” 5.56 Lothar-Walther stainless fluted barrel.
M4 feed ramps, 1/8 twist, mid length gas system.
Low profile gas block, Stainless gas tube.
Smith Enterprise Vortex flash suppressor.
Troy Alpha rail.
Young Manufacturing Chrome M16 National Match BCG
Badger Ordnance charging handle.
Nikon 1.5x4.5x20 P-223 scope in a Burris P.E.P.R. cantilever QD mount.
Troy front folding battle sight,
MaTec USGI backup iron sight.
Versa-Pod Model 2 Bipod
Spikes Tactical forged lower
DPMS LPG
Magpul Enhanced trigger guard
Hogue Overmolded rubber pistol grip
JP Enterprises trigger, hammer, and springs
Mil spec buffer tube
Troy Industries end plate sling mount
Enidine AR-restor hydraulic recoil buffer
Tactical Springs “RED” extra power buffer spring
VLTOR Clubfoot Modstock carbine stock
BCM middy.
http://i563.photobucket.com/albums/ss72/Biggy8/IMG_2784.jpg (http://s563.photobucket.com/user/Biggy8/media/IMG_2784.jpg.html)
BCM middy.
http://i563.photobucket.com/albums/ss72/Biggy8/Picture%20715.jpg (http://s563.photobucket.com/user/Biggy8/media/Picture%20715.jpg.html)
Nice KISS.
Did you swap out the triangular handguard cap?
Noveske middy, with the stamp half on the upper and half on the lower.
It has the following upgrades:
Geissele SDE Trigger
LaRue Stock
LaRue Grip
Noveske Irons
Magpul XTM Hand Stop
AAC 51T FH
LaRue LT104
Trijicon Accupoint TR20
It's for sale which I'm bummed about but it should cover my MR556
http://i345.photobucket.com/albums/p390/Thenightwatchman88watchman88/20f646c86077c2dff0761aac772217ff_zpsbrpptnw9.jpg
http://i345.photobucket.com/albums/p390/Thenightwatchman88watchman88/b5471cea039540331390931952779c19_zpssefo4lnq.jpg
http://i345.photobucket.com/albums/p390/Thenightwatchman88watchman88/a9709ea5ef3a68e2872c99f94ec02b6e_zpsk6hulaf2.jpg
http://i345.photobucket.com/albums/p390/Thenightwatchman88watchman88/fb3cacd6749bb1d308f1393b1c79286d_zps1zucow5f.jpg
http://i345.photobucket.com/albums/p390/Thenightwatchman88watchman88/465f92a7568277e0127399dbbf4c685b_zpsyaywwgyf.jpg
http://i345.photobucket.com/albums/p390/Thenightwatchman88watchman88/67fa47d789903ca95f6859b555df1b1d_zpstpa0vi4o.jpg
S&W M&P15 Mid MOE w/ Aimpoint PRO & Hogue stock
http://i.imgur.com/5wI59Uq.jpg
Livefreeordie92
08-22-15, 22:28
http://i1320.photobucket.com/albums/u536/livefreeordie92/Mobile%20Uploads/image_zpsvf9rdhnp.jpg (http://s1320.photobucket.com/user/livefreeordie92/media/Mobile%20Uploads/image_zpsvf9rdhnp.jpg.html)
14.5" BCM middy with an Omega 9.0, HSP WML, Comp M4.
Nice KISS.
Did you swap out the triangular handguard cap?
Yes, It took me around 2 hours to install these handguards on this BCM upper. I pulled the front sight base off, cut off the bayonet lug and sling mount ( optional ), filed & dremeled it smooth , cold blued then high heat black painted the bare metal areas, installed the round end cap I somehow had from years ago, then reinstalled the front sight base with the gas tube still attached. I did not have
a whole lot of trouble installing the handguards, but they do fit real tight. I filed just a little bit off the inside, inside rear corners of the bottom handguard where the corners hit the delta ring and it seemed to help some getting it to snap together. I did not use a handguard installation tool or have any help installing these, but you may. Absolutely no movement in the handguard , I like the shrouded front sight base and they feel real nice in the hand, to me.
Renegade04
08-23-15, 19:33
Here are my Mid-lengths.
16" Mid-length Dissy
http://i100.photobucket.com/albums/m8/jamesrea_2006/jamesrea%202012/017_zps1cb7fe44.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/jamesrea%202012/017_zps1cb7fe44.jpg.html)
14.5" Mid-length
http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/001_zps39cde8ea.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/001_zps39cde8ea.jpg.html)
16" Mid-lengths
http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/005_zpsa0ac15f6.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/005_zpsa0ac15f6.jpg.html)
http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/008_zps8qkiafft.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/008_zps8qkiafft.jpg.html)
BlueCollar_SD
09-10-15, 18:41
BCM 16" lightweight middy upper on a spikes lower.
http://i1377.photobucket.com/albums/ah46/BlueCollar_SD/20150725_112959-1_zpsyzymipqq.jpg
3494134942
Left is a 16" mid length. Right is a 14.5" mid length.
Aero P upper
Omni lower
BCM charge handle
BCM buffer tube single point QD lock ring
B.A.D. Lever
DPMS AR15 BCG
DD 6.8 SPC bolt
IMI pistol grip
ATI forend
IMI forend grip
Mission First tact buttstock
ARP helical fluted 3O Herrett 16" mid length barrel
Vortex 2x7 Crossfire Scope
Burris QD scope mount
Allah_Snackbah
09-11-15, 13:15
http://i95.photobucket.com/albums/l133/riceslayer302/IMG_20150820_162242_zpsutr4uwmr.jpg (http://s95.photobucket.com/user/riceslayer302/media/IMG_20150820_162242_zpsutr4uwmr.jpg.html)
usmcchet9296
09-15-15, 23:42
https://farm1.staticflickr.com/594/21417957262_93dc13d431_c.jpg (https://flic.kr/p/yCCCvd)Lightweight AR15 (https://flic.kr/p/yCCCvd) by John Hermesmeyer (https://www.flickr.com/photos/jhermesmeyer/), on Flickr
xbmxracerx
09-18-15, 13:03
Mine on the left and Nate Murr's on the right
http://i17.photobucket.com/albums/b66/emufreak1/3F16FA18-D97D-4E3D-A598-FC393E4AE64A_zpsedrf65c5.jpg (http://s17.photobucket.com/user/emufreak1/media/3F16FA18-D97D-4E3D-A598-FC393E4AE64A_zpsedrf65c5.jpg.html)
https://farm8.staticflickr.com/7575/15933620841_d46f5ed8c6_b.jpg (https://flic.kr/p/qgZYmH)Spike's 14.5" LW Middy Honey Badger Build (https://flic.kr/p/qgZYmH) by Sean Dobbins (https://www.flickr.com/photos/ssracer77/), on Flickr
BlueCollar_SD
09-19-15, 14:27
An HBAR middy upper i threw together and slapped on an old Bushmaster lower. For being made up of mostly old spare parts, I like it. I'll need to actually buy some BUIS for it eventually.
http://i1377.photobucket.com/albums/ah46/BlueCollar_SD/20150919_141909-1_zpseglqm5ye.jpg
daddyusmaximus
09-19-15, 16:19
https://farm8.staticflickr.com/7575/15933620841_d46f5ed8c6_b.jpg (https://flic.kr/p/qgZYmH)Spike's 14.5" LW Middy Honey Badger Build (https://flic.kr/p/qgZYmH) by Sean Dobbins (https://www.flickr.com/photos/ssracer77/), on Flickr
Nice. Is that a Dynacomp brake? How does that work?
Nice. Is that a Dynacomp brake? How does that work?
It is, came on the complete upper. It works pretty good, but it has since been replace with an AAC mount. It's sitting in a parts bucket now.
Mine on the left and Nate Murr's on the right
http://i17.photobucket.com/albums/b66/emufreak1/3F16FA18-D97D-4E3D-A598-FC393E4AE64A_zpsedrf65c5.jpg (http://s17.photobucket.com/user/emufreak1/media/3F16FA18-D97D-4E3D-A598-FC393E4AE64A_zpsedrf65c5.jpg.html)
Where did Nate get that paint job. Is that a diy job?
Mine on the left and Nate Murr's on the right
http://i17.photobucket.com/albums/b66/emufreak1/3F16FA18-D97D-4E3D-A598-FC393E4AE64A_zpsedrf65c5.jpg (http://s17.photobucket.com/user/emufreak1/media/3F16FA18-D97D-4E3D-A598-FC393E4AE64A_zpsedrf65c5.jpg.html)
Nice couple!
daddyusmaximus
10-14-15, 10:55
My RECCE/SPR hybrid is pretty much my go to gun for everything other than home defense. My SBR does that job.
http://i219.photobucket.com/albums/cc306/daddyusmaximus/Guns/RECCE%20on%20flag%20angled_zpslkt6lszv.jpg (http://s219.photobucket.com/user/daddyusmaximus/media/Guns/RECCE%20on%20flag%20angled_zpslkt6lszv.jpg.html)
Moose-Knuckle
10-14-15, 14:54
DDM4V5LW
https://farm1.staticflickr.com/274/18571125364_dff57e0f2c_k.jpg
BCM BFH KISS
https://farm1.staticflickr.com/688/20882076635_cd4fdf81fc_k.jpg
Started life as;
https://c1.staticflickr.com/9/8777/17634598713_57285f9584_c.jpg (https://c1.staticflickr.com/9/8777/17634598713_8aa039cf78_o.jpg)
Has evolved into;
https://c1.staticflickr.com/1/666/20480475330_a4c2e63fab_c.jpg (https://c1.staticflickr.com/1/666/20480475330_1c2d0155c6_o.jpg)
Not surprisingly, I want another fixed FSB mid-length.... grass is always greener, and all that.
daddyusmaximus
10-15-15, 09:05
Not surprisingly, I want another fixed FSB mid-length.... grass is always greener, and all that.
Of course you do. Can't fix a bayonet without the FSB. If only someone would invent a real, useable rail mounted bayonet...
Of course you do. Can't fix a bayonet without the FSB. If only someone would invent a real, useable rail mounted bayonet...
Give it time, I'm sure someone will make a keymod bayo lol.
That said, I do prefer the little tiny 62gr remote bayonets that this thing spits out!
Replaced original black furniture (S&W M&P15 Mid MOE) with FDE (including a MOE K2 grip) and swapped MOE adjustable stock for fixed. I'm liking it so far.
http://i.imgur.com/zuOooQC.jpg
click boom
10-19-15, 19:48
http://i58.tinypic.com/2l91j7r.jpg
Dist. Expert 26
10-20-15, 11:14
My 14.5" setup. The only thing not in the picture is the Inforce WML in a Haley Thorntail mount.
http://i1025.photobucket.com/albums/y316/Alexmx126/20141213_1450010_1.jpg (http://s1025.photobucket.com/user/Alexmx126/media/20141213_1450010_1.jpg.html)
Here is my first build. A mid-length.
35611
Started life as;
https://c1.staticflickr.com/9/8777/17634598713_57285f9584_c.jpg (https://c1.staticflickr.com/9/8777/17634598713_8aa039cf78_o.jpg)
Has evolved into;
https://c1.staticflickr.com/1/666/20480475330_a4c2e63fab_c.jpg (https://c1.staticflickr.com/1/666/20480475330_1c2d0155c6_o.jpg)
Not surprisingly, I want another fixed FSB mid-length.... grass is always greener, and all that.
Yes you do, yes you do.
http://i1281.photobucket.com/albums/a501/Caeser001/Mobile%20Uploads/IMG_20151027_195124562_HDR_zpsyragei5b.jpg (http://s1281.photobucket.com/user/Caeser001/media/Mobile%20Uploads/IMG_20151027_195124562_HDR_zpsyragei5b.jpg.html)
Fresh out of the box.
http://i1281.photobucket.com/albums/a501/Caeser001/Mobile%20Uploads/IMG_20151027_193421478_zps0c9e23du.jpg (http://s1281.photobucket.com/user/Caeser001/media/Mobile%20Uploads/IMG_20151027_193421478_zps0c9e23du.jpg.html)
Will probably get a mossie midnight mount, surefire x300v, and offset lasermax uni ir. Still on the fence about an optic. Maybe a TA33. Would be a nice, stupid lightweight fighting/shtf rifle with night time and mid range capability.
Yes you do, yes you do.
http://i1281.photobucket.com/albums/a501/Caeser001/Mobile%20Uploads/IMG_20151027_195124562_HDR_zpsyragei5b.jpg (http://s1281.photobucket.com/user/Caeser001/media/Mobile%20Uploads/IMG_20151027_195124562_HDR_zpsyragei5b.jpg.html)
Fresh out of the box.
http://i1281.photobucket.com/albums/a501/Caeser001/Mobile%20Uploads/IMG_20151027_193421478_zps0c9e23du.jpg (http://s1281.photobucket.com/user/Caeser001/media/Mobile%20Uploads/IMG_20151027_193421478_zps0c9e23du.jpg.html)
Will probably get a mossie midnight mount, surefire x300v, and offset lasermax uni ir. Still on the fence about an optic. Maybe a TA33. Would be a nice, stupid lightweight fighting/shtf rifle with night time and mid range capability.
Sounds like it's going to be a sweet setup!
I used a rifle similar to yours (lightweight, fixed FSB, KMR9) not too long ago, and it handled stupid nice.
Allah_Snackbah
10-31-15, 04:30
http://i95.photobucket.com/albums/l133/riceslayer302/IMG_20150519_194959_zpsudtfrzp0.jpg (http://s95.photobucket.com/user/riceslayer302/media/IMG_20150519_194959_zpsudtfrzp0.jpg.html)
Precision rig
http://i281.photobucket.com/albums/kk201/henschman/guns/468EC0A7-20B7-45B2-9ECC-BF73B63BC324_zps2tnoexmj.jpg
6.8 hunting rig
http://i281.photobucket.com/albums/kk201/henschman/guns/43F7B40F-9F09-4348-8CF8-366C7E3DF4BF_zpsjcolotmt.jpg
Home defense and all around fighting rifle
http://i281.photobucket.com/albums/kk201/henschman/guns/imagejpg2_zps138ed8f8.jpg
[QUOTE=henschman;2203872]Precision rig
http://i281.photobucket.com/albums/kk201/henschman/guns/468EC0A7-20B7-45B2-9ECC-BF73B63BC324_zps2tnoexmj.jpg
about the barrel and rail, how long are they ????
Nothing fancy, BCM upper, BCM gunfighter stock, BCM RE, spikes tactical lower, and LPK, LaRue APEG, and BFG VCAS sling
http://i1377.photobucket.com/albums/ah77/zackmarrs/Mobile%20Uploads/20151109_161731_zpslplbhxdd.jpg (http://s1377.photobucket.com/user/zackmarrs/media/Mobile%20Uploads/20151109_161731_zpslplbhxdd.jpg.html)
survivorman
11-16-15, 06:28
Hi guys been thinking of a midlength lately, own all carbines here I know its been discussed like crazy but is the recoil significantly less with midlengths? Sorry if its been posted in other pages, thinking about a build for my young son
Hi guys been thinking of a midlength lately, own all carbines here I know its been discussed like crazy but is the recoil significantly less with midlengths? Sorry if its been posted in other pages, thinking about a build for my young son
Yes, it has less recoil, not a huge difference, but it is there.
It is to the 16" barrel as the rifle length gas system is to a 20" barrel
xbmxracerx
11-23-15, 10:23
http://i17.photobucket.com/albums/b66/emufreak1/AD9CC676-0276-474A-9A34-F282821A6062_zpsyl0twlha.jpg (http://s17.photobucket.com/user/emufreak1/media/AD9CC676-0276-474A-9A34-F282821A6062_zpsyl0twlha.jpg.html)
http://i17.photobucket.com/albums/b66/emufreak1/2486A299-BDB6-4608-8802-DDFE79B18AF2_zpsizz2qkdj.jpg (http://s17.photobucket.com/user/emufreak1/media/2486A299-BDB6-4608-8802-DDFE79B18AF2_zpsizz2qkdj.jpg.html)
daddyusmaximus
11-23-15, 10:45
Just right...
36168
Pleased to see I'm not the only one rocking the FSBs.
http://i397.photobucket.com/albums/pp59/zmonki/M4%20Rifles/BCM145_7966.jpg (http://s397.photobucket.com/user/zmonki/media/M4%20Rifles/BCM145_7966.jpg.html)
Thumperboy
12-01-15, 14:25
is $1100 a good deal for a BCM BFH 14.5 inch in FDE? comes with KMR rail and troy back up irons.
is $1100 a good deal for a BCM BFH 14.5 inch in FDE? comes with KMR rail and troy back up irons.
Complete rifle? Good deal.
Nightstalker865
12-01-15, 19:32
My BCM 14.5" middy. Runs smooth as silk and does everything I ask.
http://images.tapatalk-cdn.com/15/12/01/206cc87f006673023a59d19c6a4518d7.jpg
Sent from my iPhone using Tapatalk
Thumperboy
12-01-15, 19:37
yes complete rifle with troy back ups
BCM 16" LW Middy. B5 Systems Handguard is the smallest diameter of any 2 piece I have seen.
http://pic20.picturetrail.com/VOL1321/4777050/24667382/411540156.jpg
http://pic20.picturetrail.com/VOL1321/4777050/24667382/411540157.jpg
My Very First BCM upper. 16" middy ELW and 15" KMR.
http://pic20.picturetrail.com/VOL1321/4777050/24318160/410692349.jpg
BCM bfh lw 14.5" with 13" kmr rail, atlas bipod, leupold 2.5-8x36 with m2 turrents (TS30 A2 for 77 gr.), vcas sling. This is my new predator hunting weapon. It's lightweight, accurate and I love this scope. Sight it at whatever range you want, zero the turret caps and then simply dial to your target distance. I don't know how it could get easier.
http://i69.photobucket.com/albums/i75/thebestofindica/Guns/20151206_134939.jpg
GUNSLINGER733
12-06-15, 20:59
36391
36392
msnyder0609
01-06-16, 11:20
Here's my (built) BCM middy on a Spikes lower. BCM 14.5" pinned with a Strikes Industries King Comp. 12" Fortis Rev II
369043690536906
JBarbaresi
01-08-16, 11:15
Just recently switched from this Centurion Arms 16" upper
http://i609.photobucket.com/albums/tt176/jbarbaresi/Guns/2015-12-24%2012.34.41_zpsmnlimppt.png (http://s609.photobucket.com/user/jbarbaresi/media/Guns/2015-12-24%2012.34.41_zpsmnlimppt.png.html)
to this BCM 14.5" KMR-A upper.
http://i609.photobucket.com/albums/tt176/jbarbaresi/Guns/DSC_0324-1-01_zpsdcxcdh3c.jpeg (http://s609.photobucket.com/user/jbarbaresi/media/Guns/DSC_0324-1-01_zpsdcxcdh3c.jpeg.html)
Allah_Snackbah
01-13-16, 14:05
my girls
http://i95.photobucket.com/albums/l133/riceslayer302/IMG_20160102_224244_zpsjubrfgrk.jpg (http://s95.photobucket.com/user/riceslayer302/media/IMG_20160102_224244_zpsjubrfgrk.jpg.html)
http://i95.photobucket.com/albums/l133/riceslayer302/IMG_20150917_211718_zpsxznjs1fa.jpg (http://s95.photobucket.com/user/riceslayer302/media/IMG_20150917_211718_zpsxznjs1fa.jpg.html)
mutedblade
01-16-16, 12:24
My Very First BCM upper. 16" middy ELW and 15" KMR.
http://pic20.picturetrail.com/VOL1321/4777050/24318160/410692349.jpg
Do you have a weight with BCG and charging handle?
ken livingston
01-19-16, 21:36
http://i70.photobucket.com/albums/i105/jason978/IMG_2432_zpsg36fobol.jpg (http://s70.photobucket.com/user/jason978/media/IMG_2432_zpsg36fobol.jpg.html)
12.5 mid length 6.8
http://uploads.tapatalk-cdn.com/20160120/2050d96a77973f675514df62ea1318f9.jpg
Sent from my iPhone using Tapatalk
RobertTheTexan
01-20-16, 10:46
http://img.photobucket.com/albums/v193/EvilKev/Weapons/IMG_0861.jpg
and the uppers new home (until I armbend KAC for a lower ;) )
and get one of Magpuls new stocks
http://img.photobucket.com/albums/v193/EvilKev/Courses/ContractorDriving427.jpg
VERY, VERY nice! I really like the scope - what grip is that?
mutedblade
01-29-16, 08:51
Do you have a weight with BCG and charging handle?
Just got mine from FedEx. Weighed in at 3lb 12.2 oz add the sling attachment and it's 3lb 12.4 oz. Not too shabby!
JBarbaresi
02-01-16, 09:32
http://i609.photobucket.com/albums/tt176/jbarbaresi/Guns/DSC_3634-01_zps5og76nm6.jpeg (http://s609.photobucket.com/user/jbarbaresi/media/Guns/DSC_3634-01_zps5og76nm6.jpeg.html)
http://i609.photobucket.com/albums/tt176/jbarbaresi/Guns/20160129_165651-02_zpsy6lqh0er.jpeg (http://s609.photobucket.com/user/jbarbaresi/media/Guns/20160129_165651-02_zpsy6lqh0er.jpeg.html)
http://i69.photobucket.com/albums/i75/thebestofindica/20160103_213923.jpg
http://uploads.tapatalk-cdn.com/20160202/9a19014199619bc8d1165efa3a14d856.jpg
Sent from my iPhone using Tapatalk
http://i69.photobucket.com/albums/i75/thebestofindica/20160103_213923.jpg
Gorgeous rifle!
Super Dave
03-02-16, 10:12
DELETE
Pyromelana
03-22-16, 13:31
https://imgur.com/AHHDIZy
One of our mids.
Pyromelana
03-22-16, 13:40
Another = Troy Delta FSP cutout handguard (16oz)
https://imgur.com/RyE6Ku0
And another midlength = Midwest Industries drop in handguard.
https://imgur.com/trUIqkp
Pyromelana
03-22-16, 15:04
Beautiful! !!
http://img.photobucket.com/albums/v193/EvilKev/Weapons/IMG_0861.jpg
and the uppers new home (until I armbend KAC for a lower ;) )
and get one of Magpuls new stocks
http://img.photobucket.com/albums/v193/EvilKev/Courses/ContractorDriving427.jpg
http://i304.photobucket.com/albums/nn193/M3likeguns/Mobile%20Uploads/3EDC7264-D663-49D2-A723-D6BF0D86671B.png_zpsspekvf6a.jpeg (http://s304.photobucket.com/user/M3likeguns/media/Mobile%20Uploads/3EDC7264-D663-49D2-A723-D6BF0D86671B.png_zpsspekvf6a.jpeg.html)
JBarbaresi
04-03-16, 07:00
http://i304.photobucket.com/albums/nn193/M3likeguns/Mobile%20Uploads/3EDC7264-D663-49D2-A723-D6BF0D86671B.png_zpsspekvf6a.jpeg (http://s304.photobucket.com/user/M3likeguns/media/Mobile%20Uploads/3EDC7264-D663-49D2-A723-D6BF0D86671B.png_zpsspekvf6a.jpeg.html)
What's up man, saw this pic on IG. Sick.
http://i609.photobucket.com/albums/tt176/jbarbaresi/Guns/IMG_20160327_123139_zpscixbgjnp.jpg (http://s609.photobucket.com/user/jbarbaresi/media/Guns/IMG_20160327_123139_zpscixbgjnp.jpg.html)
http://uploads.tapatalk-cdn.com/20160403/74adc493a323195bbc64c319577c626f.jpg
Same rifle new pic.
Sent from my LG-LS995 using Tapatalk
What's up man, saw this pic on IG. Sick.
http://i609.photobucket.com/albums/tt176/jbarbaresi/Guns/IMG_20160327_123139_zpscixbgjnp.jpg (http://s609.photobucket.com/user/jbarbaresi/media/Guns/IMG_20160327_123139_zpscixbgjnp.jpg.html)
Thank you dude! Not much of a forum person but figured id add to the awesome thread. Your stick is nice as well, love those T1's *thumbs up*
JBarbaresi
04-03-16, 11:16
:laugh:
Thank you dude! Not much of a forum person but figured id add to the awesome thread. Your stick is nice as well, love those T1's *thumbs up*
H1 but don't plan on taking it scuba diving any time soon so it's all good :D
My Ar project finally nearing completion. 18" Middy heavy barrel 1:8 Wylde
http://i834.photobucket.com/albums/zz267/LowThudd/20160415_120000_zpsb603grje.jpg (http://s834.photobucket.com/user/LowThudd/media/20160415_120000_zpsb603grje.jpg.html)
http://i834.photobucket.com/albums/zz267/LowThudd/20160415_120010_zpsfcvsoquf.jpg (http://s834.photobucket.com/user/LowThudd/media/20160415_120010_zpsfcvsoquf.jpg.html)
http://i834.photobucket.com/albums/zz267/LowThudd/20160415_120038_zpszbcnkez9.jpg (http://s834.photobucket.com/user/LowThudd/media/20160415_120038_zpszbcnkez9.jpg.html)
My latest project.
http://i21.photobucket.com/albums/b283/S682/FullSizeRender%204-001.jpg
xbmxracerx
04-27-16, 14:57
http://i17.photobucket.com/albums/b66/emufreak1/8D792F4D-5583-47D0-85C2-24BC3C321A9F_zpsljtvfmlc.jpg (http://s17.photobucket.com/user/emufreak1/media/8D792F4D-5583-47D0-85C2-24BC3C321A9F_zpsljtvfmlc.jpg.html)
http://i17.photobucket.com/albums/b66/emufreak1/B80A1E1D-6164-4CB7-A29C-ED6AE0F781CA_zpsh9vceibo.jpg (http://s17.photobucket.com/user/emufreak1/media/B80A1E1D-6164-4CB7-A29C-ED6AE0F781CA_zpsh9vceibo.jpg.html)
http://uploads.tapatalk-cdn.com/20160427/36e24c18d7b865e0f82c2f66e40fa64f.jpg
Sent from my iPhone using Tapatalk
39226
Aero build. Sorry for the small pic. Gotta figure out how to get them bigger from my phone
RobertTheTexan
04-30-16, 06:14
http://i17.photobucket.com/albums/b66/emufreak1/B80A1E1D-6164-4CB7-A29C-ED6AE0F781CA_zpsh9vceibo.jpg (http://s17.photobucket.com/user/emufreak1/media/8D792F4D-5583-47D0-85C2-24BC3C321A9F_zpsljtvfmlc.jpg.html)
what rail are you running with the Noveske lower?
xbmxracerx
04-30-16, 16:01
what rail are you running with the Noveske lower?
That's a Daniel Defense OmegaX rail 12" and the lower is a Daniel Defense....That is a Magpul sticker received years ago from them.
I bought a DDM4v3 5 years ago and when I built the v5 upper, I wanted to keep it the same model year and style (the rail has since been discontinued by DD)
http://i17.photobucket.com/albums/b66/emufreak1/AD9CC676-0276-474A-9A34-F282821A6062_zpsyl0twlha.jpg (http://s17.photobucket.com/user/emufreak1/media/AD9CC676-0276-474A-9A34-F282821A6062_zpsyl0twlha.jpg.html)
RobertTheTexan
04-30-16, 16:17
Very nice. I like that rail.
http://i304.photobucket.com/albums/nn193/M3likeguns/CFF638A7-2885-4491-A519-5D310905C89F_zpsujrb3vvn.png (http://s304.photobucket.com/user/M3likeguns/media/CFF638A7-2885-4491-A519-5D310905C89F_zpsujrb3vvn.png.html)
My 12 yr old daughter's carbine from Palmetto.
http://img.photobucket.com/albums/v669/nf9648/02/IMG_1381_zpsuffbxh1e.jpg
https://c6.staticflickr.com/9/8619/16154918141_4308ee91bb_o.jpg (https://flic.kr/p/qBybkp)Midlength-6712text (https://flic.kr/p/qBybkp) by Dan Passaro (https://www.flickr.com/photos/danpass/), on Flickr
My contribution
http://i238.photobucket.com/albums/ff295/Texaspoff/Javelin1%204_zpsw95c7ig5.jpg
TXPO
My BAD BAD Mid Length GAS Rifle
http://i69.photobucket.com/albums/i51/bgreerVTX/BAD%20BAD%20edit.jpg (http://s69.photobucket.com/user/bgreerVTX/media/BAD%20BAD%20edit.jpg.html)
http://i69.photobucket.com/albums/i51/bgreerVTX/Mobile%20Uploads/image_173.jpeg (http://s69.photobucket.com/user/bgreerVTX/media/Mobile%20Uploads/image_173.jpeg.html)
http://i69.photobucket.com/albums/i51/bgreerVTX/Mobile%20Uploads/image_174.jpeg (http://s69.photobucket.com/user/bgreerVTX/media/Mobile%20Uploads/image_174.jpeg.html)
http://i69.photobucket.com/albums/i51/bgreerVTX/Mobile%20Uploads/image_175.jpeg (http://s69.photobucket.com/user/bgreerVTX/media/Mobile%20Uploads/image_175.jpeg.html)
Here is my midlength that I have posted before. I have made a few changes/upgrades. It now has an Aimpoint CompM4s and an Elzetta mini-CQB light. I took off the laser.
39890
MountainRaven
06-14-16, 23:44
Cross-post from the retro picture thread.
http://i11.photobucket.com/albums/a198/Jagdraben/IMG_1168%20copy_zpsoqed5dej.jpg
http://uploads.tapatalk-cdn.com/20160626/31cdf05939b289c90391e0bfd3db721f.jpghttp://uploads.tapatalk-cdn.com/20160626/d334dbbdcf4f5ac7fd58c949d17cde42.jpg
Picked up this DDM4V11 SLW from LGS yesterday. I have to say, I'm in love
Sent from my iPhone using Tapatalk
http://uploads.tapatalk-cdn.com/20160626/31cdf05939b289c90391e0bfd3db721f.jpghttp://uploads.tapatalk-cdn.com/20160626/d334dbbdcf4f5ac7fd58c949d17cde42.jpg
Picked up this DDM4V11 SLW from LGS yesterday. I have to say, I'm in love
Sent from my iPhone using Tapatalk
Nice shop!
Sent from my iPhone using Tapatalk
Nice shop!
Sent from my iPhone using Tapatalk
I wish it were mine. Lol. At my full disposal, but It's my grandfathers. Heated and air conditioned, bathroom, fridge a 9000 lbs lift and a full loft I sleep in often.
Sent from my iPhone using Tapatalk
backpacker
06-26-16, 18:50
https://c2.staticflickr.com/2/1716/24448754539_9dd34e506c_b.jpg
backpacker
06-26-16, 18:50
https://c1.staticflickr.com/1/697/22594879494_028eed3838_b.jpg
Here's mine. Factory bcm lower. Bcm upper, kmr 15, saber 16" middy barrel, yhm gas block, ao precision bcg. Planning on a straight up a2 flash suppressor. I'm happy with it so far. All I'm planning right now are daniel defense fixed sights , a2.
http://uploads.tapatalk-cdn.com/20160708/35f8e73ac34a0e8bf2ed4409b05f98e1.jpg
One of my middy's... BCM BFH LW upper with fixed FSP, MI M-Lok drop-in rail, Matech BUIS, Meprolight Tru-Dot RDS, Magpul STR and B.A.D. lever.
40364
40605
My 14.5 Noveske build
BCM KMR-A BFH 16"
http://i13.photobucket.com/albums/a266/LOBO2/BCM%2016%20inch%20KMR%20Alpha/2756ba77-2ad3-43fc-b908-fb77ca122467_zpsjx7nbjte.jpg
Renegade04
07-25-16, 17:21
With a 16" LaRue Tactical PredatAR barrel
http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202015/ARs/LaRue%20Tactical%20Build/0034_zpsjrqhphjv.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202015/ARs/LaRue%20Tactical%20Build/0034_zpsjrqhphjv.jpg.html)
With a 18" LaRue Tactical Stealth barrel
http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202015/ARs/BAD%20build/023_zps3lhf4lbq.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202015/ARs/BAD%20build/023_zps3lhf4lbq.jpg.html)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.