View Full Version : Good Stock Package?
I am thinking about buying this package. Is this a good quality set-up?
http://www.vltor.com/emod_gallery.htm#combo-black
thanks
can the quality of vltor really be questioned?
A simple one word answer:
YES
I had a similar Vltor on my previous AR. You can't go wrong with one.
pacrimguru
04-22-10, 03:01
i love VLTOR products, especially the EMOD stock. fyi, there's a new stock coming out soon called the IMOD. i suggest taking a look at it before you lock yourself in to either.
While not my personal favorite, the quality is as good as it gets.
crazymoose
04-22-10, 19:22
My favorite stock.
zero issues with my emod. great stock for the $$.
VMI_Marine
04-24-10, 01:42
If you haven't read this article (http://www.03designgroup.com/technotes/ar15-buttstock-considerations), I highly recommend it. Also, might want to do some research and see if your AR already has a milspec buffer tube before you plop down the extra $70 for the combo kit. The EMOD is the only after market stock I've used, so I can't really compare it to others, but I've taken mine on two Iraq deployments and loved it.
Ridge_Runner_5
04-24-10, 17:53
can the quality of vltor really be questioned?
Well they did sue Magpul for stealing the stock design they stole from LMT:rolleyes:
ive got the tan one and love it
I've always known vltor is the shit as far as quality, but I want to buy the package for my build. And I wanted to make sure the components not particularly the stock itself, which I like is for sure "mil-spec" or better? Sorry for the confusion of the question.
Bottom line: I like the stock. Should I buy just the stock alone because there are better receiver kits? Or will this one be just as good as any other kit?
thx
VMI_Marine
04-25-10, 03:02
So if I read this right, you're wondering if you should get the combo kit with the Vltor receiver extension? Depends on if you want a 4, 5, or 6-position receiver extension, I suppose. Vltor's extension is a 5-position, although if that's what you want I think I'd buy it separately and get an upgraded buffer and action spring. There are better deals on the parts kit anyway, check BCM for one.
I have one of the kits, just got it delivered this week from Rainier.
Its sitting on table next to me :p
quality is top shelf, as expected.
Do you have a specific question I can answer ?
Just got my Imod from SKD, and I'm impressed. No play or wobble on my extension. Feels almost as tight as a CTR with the friction lock on. The cheek weld feels great, and it really balances out my BCM lightweight middy well.
GTG...Vltor makes good stuff.
I have one of the kits, just got it delivered this week from Rainier.
Its sitting on table next to me :p
quality is top shelf, as expected.
Do you have a specific question I can answer ?
Not really, just wanted to make sure the "parts" were mil spec and all that. I just wanted to buy a kit vs buying all the separate parts that go into it. Thanks
PrivateCitizen
05-06-10, 21:19
The new IMOD is nice also.
I got mine from SKD last Saturday. Mounted it up on a BCM tube kit. Very pleased.
I replaced an ACS I found too clunky.
Bravo is closing out the Modstock at half off.
http://www.bravocompanyusa.com/AR15-Parts-s/88.htm
Can anyone explain why the IMOD is less expensive than the EMOD? Don't get me wrong, I'm not complaining, but I am just curious.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.