mid-lengh rails

[ffhounddog]

I am looking for some mid-length Rails to go on the my Calvery Arms AR-15. I want to add my surefire weapons light and a vertical Grip on the bottom of the handguards. Any suggestions.


http://i25.photobucket.com/albums/c68/ffhounddog/ARGlockPhotos002.jpg

[rob_s]

If you already have a mid-length gas system, I'd go with Larue, and if you're looking to cover up the FSB/gasblock I'd go with Daniel Defense.

[ffhounddog]

I probally did not explain this well I do not want to replace the handguards I just want to add a bottom rail. Does larue and DD have those?

[rob_s]

Personally, I wouldn't attach a VFG to the bottom of the handguards, so I can't help you there.

[5POINT56]

Agreed. The rail that attaches to the bottom of standard hand guards is a half baked solution IMO. Below is a midlength AR of mine using a D.D. 9.0 Lite.

Nothing but praise for Daniel Defense....outstanding product.

http://i150.photobucket.com/albums/s107/5POINT56/NewPix074.jpg

[LOKNLOD]

If your goal is just a light and grip along the bottom, a 2-piece non-free float rail like the Midwest Industries MCTAR-18 or Surefire M81/85 is a viable option. Much less permanent than the DD or Larue rails, not to mention much cheaper, but also a much better solution than the bolt-on lower rail on standard handguards.

[MH64]

And if you are wanting something that free floats the barrel, then go with a Midwest MCTAR-21 or a Troy 9" rail.
These are the easiest to install of the free float rails.

[Rock-N-Ruin]

Here: http://www.troyind.com/shop/product_info.php?cPath=24&products_id=44

and here: http://www.midwestindustriesinc.com/ar_2_piece_forearm.htm This one is a little cheaper than the Troy model....


Like mentioned above, I think this is also a good idea....
here's a free float 2 piece rail.. I think you may want the 9" but ya get the idea...

[DamnYank!]

not to dispute these guys suggestions (i just ordered a Troy 9" free float for my middy) but if you are set on just adding a rail to the bottom of your existing guards for a vert grip or light you can get a composite or aluminum one from promag via MidwayUSA that bolts right up with no modifications and is easy to reverse/uninstall. they run like $12 or so.

[ffhounddog]

http://www.commandarms.com/product.asp?pID=145&cID=8

I am thinking of just getting this. Should work and if not I am just out a few bucks.