wolf_walker
09-28-10, 21:41
New weapon, spikes middy upper, Tac Inno t15 lower, unknown LPK.
Functions fine, I observe the bolt catch when pushed either by hand or a mag is full up and is barely touching the locking lugs on the bolt. I pulled the bolt catch and checked the spring and buffer and it's correct and they do depress below the level of the receiver opening so they are not the problem, bolt catch moves freely, it just physically cannot move up far enough to make good contact with the bolt.
Out of spec bolt catch, yes?
Functions fine, I observe the bolt catch when pushed either by hand or a mag is full up and is barely touching the locking lugs on the bolt. I pulled the bolt catch and checked the spring and buffer and it's correct and they do depress below the level of the receiver opening so they are not the problem, bolt catch moves freely, it just physically cannot move up far enough to make good contact with the bolt.
Out of spec bolt catch, yes?