View Full Version : Precision Rifle - Semi-Auto PICTURE THREAD
Doc. Holiday
08-04-14, 17:23
Hey Wormy I'm actually looking at painting my gun using the same color scheme you did for the bottom (Desert one). What colors of paint did you use? Brand?
Wormydog1724
08-04-14, 17:56
Hey Wormy I'm actually looking at painting my gun using the same color scheme you did for the bottom (Desert one). What colors of paint did you use? Brand?
I usually use krylon camo colors, tan, brown and green.
That is rustoleum's camo colors. Tan and brown. There are two tans but I can't remember which one I used.
Krylon always does wonders... I'm just sayin'
http://i356.photobucket.com/albums/oo5/toppyjai/spikes3_zpsa7e17af7.jpg (http://s356.photobucket.com/user/toppyjai/media/spikes3_zpsa7e17af7.jpg.html)
Krylon always does wonders... I'm just sayin'
*snip*
I think that's the biggest rifle scope I've ever seen...
Looks like you've got something attached to the end of the scope, care to enlighten me on it? Thanks!
I think that's the biggest rifle scope I've ever seen...
Looks like you've got something attached to the end of the scope, care to enlighten me on it? Thanks!
Sunshade w/ flip cap.
MorphCross
08-09-14, 18:12
Krylon always does wonders... I'm just sayin'
*Snip*
Is the Sunshade in contact with the flip up front sight? If so does it force the objective upwards when mounting it?
Is the Sunshade in contact with the flip up front sight? If so does it force the objective upwards when mounting it?
Same thing I was thinking. And why even have sights on it as it doesn't look like a QD setup. YMMV
Same thing I was thinking. And why even have sights on it as it doesn't look like a QD setup. YMMV
you gentlemen are correct! as of last week, I took off the sights and used them on a new project that i'm working on. the scope is a vortex pst 6-24x50 with nightforce mounts, the glass is clean and clear. i'm planning to get a larue spr qd mount when the funds allow. sorry for the late reply, its been a busy week for me at work.
Lets throw a wrench in here:
https://imagizer.imageshack.us/v2/800x600q90/25/img1014t.jpg
Upper:
- MEGA Arms billet upper
- Rainier Arms UltraMatch 18" Stainless SPR barrel
- Geissele 15" SMR Mk2 rail
- Syrac Ordnance GenII adjustable gas block
- BCM BCG
- AAC muzzle brake
- Magpul MBUS Pro BUIS
- Vortex Viper PST 6-24x50 scope (Overkill, but the glass is excellent)
- American Defense Recon scope mount
- BCM Gunfighter charging handle (Large latch)
- Harris bi-pod on an American Defense QD mount
Lower:
- MEGA Arms Ambi billet lower
- Geissele Hi-Speed National Match trigger
- Battle Arms Development selector
- Magpul MOE Rifle stock
- Magpul K2 grip
- Sprinco 'Green' spring with standard rifle buffer
It's been sharing my M4-2000 with my SBR.
https://farm6.staticflickr.com/5600/15522365442_8d446e0ecf_h.jpg
100 Yard Grouping w/ Hornady 75gr BTHP handloads @ 2700fps (suppressed):
https://farm4.staticflickr.com/3950/15455271879_ea8d851c98_b.jpg
300 Yard grouping w/ Hornady 75gr BTHP handloads @ 2700fps (suppressed):
https://farm4.staticflickr.com/3952/15455271849_f671d50fbb_b.jpg
After trying out the Viper Vortex PST 2.5-10x32mm I'll be ordering one for myself this week. The irons will be moved to an SBR.
Specs:
Rainier Billet Upper Receiver
Centurion Arms 16.1" Recce barrel
Centurion Arms CMR 14"
TROSUSA 1/2-28 to 5/8-24 Thread Adapter
TBAC 30P-1
LMT BCG
WOA LPK
ALG ACT
BCM GUNFIGHTER Mod 3 Grip
VLTOR A5 extension tube
JP Silent Captured Spring
Magpul STR stock
http://i.imgur.com/mZtQL5w.jpg
http://i.imgur.com/7RqKjkB.jpg
FireandFlames
10-21-14, 19:57
http://i61.tinypic.com/2e1810x.jpg
My SASS.
http://tapatalk.imageshack.com/v2/14/10/21/8e93ce2e47d222d6cabcda2f17acf1b1.jpg
Sent from my iPhone using Tapatalk
Wears a ACS-L now, but this is my semi-auto precision rifle.
18" AR Performance 6.8x43
MI G2SS 15"
Geissele SSA
Viper PST 2.5-10x44
http://i1199.photobucket.com/albums/aa464/jmnielsen1/2014-07/2CB4047E-A720-4A67-892B-119CCE54A913_zpsx7zuh17o.jpg (http://s1199.photobucket.com/user/jmnielsen1/media/2014-07/2CB4047E-A720-4A67-892B-119CCE54A913_zpsx7zuh17o.jpg.html)
5 shot group of Speer 90 TNTs
http://i1199.photobucket.com/albums/aa464/jmnielsen1/null_zps1134c3ef.jpg (http://s1199.photobucket.com/user/jmnielsen1/media/null_zps1134c3ef.jpg.html)
And another 5 shot group of 110 HPBT
http://i1199.photobucket.com/albums/aa464/jmnielsen1/null_zps26227913.png (http://s1199.photobucket.com/user/jmnielsen1/media/null_zps26227913.png.html)
I've been participating in two 1.5 MOA M14 challenges on some other forums. One forum requires four 5-shot groups under 1.5 MOA on one clean sheet of paper, the other forum requires five 5-shot groups. I've managed to complete both challenges at both 100 and 200 yards with two different rifles. Here are mine...
One is an LRB with a medium weight Criterion barrel and a carbon graphite kevlar stock that I bedded myself.
The other is a standard M1A in a Blackfeather chassis. Both challenges were shot using a Bassett scope mount and the same Zeiss Conquest 3-9x50mm scope.
The LRB...
http://i1205.photobucket.com/albums/bb423/tonyben3/IMG_1045_zps060fc9c0.jpg (http://s1205.photobucket.com/user/tonyben3/media/IMG_1045_zps060fc9c0.jpg.html)
100yd groups averaging 1.159"...
http://i1205.photobucket.com/albums/bb423/tonyben3/IMG_1602_zps4fef6b43.jpg (http://s1205.photobucket.com/user/tonyben3/media/IMG_1602_zps4fef6b43.jpg.html)
The M1A with a 1MOA average group at 200yds...
http://i1205.photobucket.com/albums/bb423/tonyben3/IMG_1193_zpsc6fdafe2.jpg (http://s1205.photobucket.com/user/tonyben3/media/IMG_1193_zpsc6fdafe2.jpg.html)
http://i1205.photobucket.com/albums/bb423/tonyben3/IMG_1164_zps062a6105.jpg (http://s1205.photobucket.com/user/tonyben3/media/IMG_1164_zps062a6105.jpg.html)
I just got a Leupold Mk4 scope this week so I'm going to try the challenge at 300 yards in the next week or 2.
Enjoy!
Tony.
Lets throw a wrench in here:
https://imagizer.imageshack.us/v2/800x600q90/25/img1014t.jpg
You lucky son of a b.......
http://i854.photobucket.com/albums/ab104/ASH556/74EB3C32-EAF5-41AC-A471-6CE4769226C4.jpg (http://s854.photobucket.com/user/ASH556/media/74EB3C32-EAF5-41AC-A471-6CE4769226C4.jpg.html)
http://i.imgur.com/vQuobRY.jpg
Yama Arashi
11-26-14, 23:01
http://s3.postimg.org/qu4zksu6b/IMG_1389.jpg
Dirtyboy333
11-27-14, 00:00
Pretty much finished this build (can't decide on a muzzle device). Absolutely love it. It's borrowing my MWS's optic.
http://i1230.photobucket.com/albums/ee498/Dirtyboy333/C5E9C76E-6B08-40C1-A815-2726A4C42CAA_zpsmdbfgnhd.jpg (http://s1230.photobucket.com/user/Dirtyboy333/media/C5E9C76E-6B08-40C1-A815-2726A4C42CAA_zpsmdbfgnhd.jpg.html)
http://i1230.photobucket.com/albums/ee498/Dirtyboy333/74E4C504-6AB4-4AD7-A822-A6893DC37403_zpscij9rh9o.jpg (http://s1230.photobucket.com/user/Dirtyboy333/media/74E4C504-6AB4-4AD7-A822-A6893DC37403_zpscij9rh9o.jpg.html)
Thankfully some members convinced me to try the Rainier Ultramatch barrel (Shilen).
This is from the very first outing with handloads/match ammo. Loads selected at random.
Upper 5 groups shot with 24.0 Varget and 77 Nosler Custom Comps. Bottom 5 groups are some load except topped off with 77 Berger tactical OTM (I only bought these because they were all my local store had above 70 grains and I'm sure glad I did).
Note: I know not many will believe this but it's the honest truth and I would never be so pathetic as to lie over something so insignificant. But anyway, I was getting frustrated with my results with the Noslers and got careless and quickly aimed at the wrong bullseye on the bottom left group. I drew a circle where it would have been. If I would have known the Bergers were going to shoot so well and I would be posting them, I would have put a new target up for them or at least taken a pic of the target showing the 1 hole before shooting the Bergers. Because of that shot I shot the Bergers in reverse order taking my last 5 shots of the day into the .477" group.
http://i1230.photobucket.com/albums/ee498/Dirtyboy333/175F6316-2903-4E61-A019-C7D5F036CCF2_zpsf2hho8ds.jpg (http://s1230.photobucket.com/user/Dirtyboy333/media/175F6316-2903-4E61-A019-C7D5F036CCF2_zpsf2hho8ds.jpg.html)
This is by far the best I've ever shot with a semi-auto. Can't wait to tweak some loads.
http://i1230.photobucket.com/albums/ee498/Dirtyboy333/6E161EE9-5404-4D96-99B2-9436CBFA03D1_zpsbnct6pdu.jpg (http://s1230.photobucket.com/user/Dirtyboy333/media/6E161EE9-5404-4D96-99B2-9436CBFA03D1_zpsbnct6pdu.jpg.html)
Only had 33 rounds of cheap walmart ZQI down the tube before this outing. This barrel doesn't seem to be picky bc it shot those very well also.
Nice results DirtyBoy. My 18" intermediate UltraMatch shoot lights out for me too. Is this the SPR or intermediate barrel?
It looks like the Varget load is treating you as well as it treated me. Try some XBR instead of the Varget. It's MUCH easier to work with and gives me very similar results. It drops consistently like ball powder.
Dirtyboy333
11-27-14, 11:12
Onyx: thanks for the compliment. Yeah that 24.0 load I got from you and it's awesome but I couldn't find any SMKs. It's an SPR rifle length gas (which is on sale right now for $295!!!, I paid $360 and still think it's a steal). I'm definately all about trying some new powder because metering with Varget is a giant pain in the ass. My meter throws it so inconsistently. XBR will be what I buy next.
I know the Nosler custom comps are excellent bullets and have rave reviews but I have not had luck with them in my MWS and now this rifle. Idk why.
Onyx: thanks for the compliment. Yeah that 24.0 load I got from you and it's awesome but I couldn't find any SMKs. It's an SPR rifle length gas (which is on sale right now for $295!!!, I paid $360 and still think it's a steal). I'm definately all about trying some new powder because metering with Varget is a giant pain in the ass. My meter throws it so inconsistently. XBR will be what I buy next.
I know the Nosler custom comps are excellent bullets and have rave reviews but I have not had luck with them in my MWS and now this rifle. Idk why.
I really haven't had much luck with them either, but I know a lot of people have. I wish they would work since they are so cheap.
I just picked up one of the SPR barrels they had on sale. I have an extra barrel nut sitting in a box, so I have to build another upper. One small extra part always seems to magically turn into a new rifle/upper... It's crazy!
Dirtyboy333
11-28-14, 00:26
Haha I know feeling. An extra barrel nut and a good price on a barrel (one that you pretty much already have) was all that it took to get you started into another upper.
New Mark12Mod0 PRI upper, LMT lower with Giessele SSA-E. Now just need to decide on a bipod...
Dirtyboy333
12-05-14, 11:18
Nice!!! Is that G trigger chromed or NiB'd or something?
Dirtyboy333
12-06-14, 01:59
http://i1230.photobucket.com/albums/ee498/Dirtyboy333/4B8A9A5B-B388-4162-8FDD-6A633A2314E0_zpsobiytskz.jpg (http://s1230.photobucket.com/user/Dirtyboy333/media/4B8A9A5B-B388-4162-8FDD-6A633A2314E0_zpsobiytskz.jpg.html)
http://i1230.photobucket.com/albums/ee498/Dirtyboy333/D08ADAF9-6F76-4C7C-B776-8DD395D55555_zpsdfulplux.jpg (http://s1230.photobucket.com/user/Dirtyboy333/media/D08ADAF9-6F76-4C7C-B776-8DD395D55555_zpsdfulplux.jpg.html)
SOPMOD really sucks for prone and/or bench shooting but it works and I do love the cheekweld
Just got my optic in today. Vortex Viper PST 2.5-10x32 MRAD. Still a work in progress but at least I can shoot her now.
http://i297.photobucket.com/albums/mm229/killerchase2000/IMG_20141206_131637_zpsjjdmur5q.jpg
Do rimfires count too?
http://tapatalk.imageshack.com/v2/14/12/10/b840967bcb5c12829a60f756709dd994.jpg
Sent from my iPhone using Tapatalk
http://i40.photobucket.com/albums/e233/dpg2311/Mobile%20Uploads/20131219_184638_zps5kjiqrj0.jpg (http://s40.photobucket.com/user/dpg2311/media/Mobile%20Uploads/20131219_184638_zps5kjiqrj0.jpg.html)
http://i907.photobucket.com/albums/ac275/tyhockstaff/1fa192f7-d5e3-47c7-b0c9-979f345bf9d6_zpsa5fda11c.jpg (http://s907.photobucket.com/user/tyhockstaff/media/1fa192f7-d5e3-47c7-b0c9-979f345bf9d6_zpsa5fda11c.jpg.html)
Spikes Lower
ALG ACT Trigger/JP Yellow springs
WOA 20" Varmint Upper 1/7 twist
Leupold VX-2 Glass
http://i301.photobucket.com/albums/nn60/Seagrave77/Private/IMG_4143c_zps623784b8.jpg (http://s301.photobucket.com/user/Seagrave77/media/Private/IMG_4143c_zps623784b8.jpg.html)
http://i301.photobucket.com/albums/nn60/Seagrave77/Private/IMG_4159b_zpsd9e01b9f.jpg (http://s301.photobucket.com/user/Seagrave77/media/Private/IMG_4159b_zpsd9e01b9f.jpg.html)
MK12 ModH - Ops Inc 12th - IRH MKII Thermal
http://i47.photobucket.com/albums/f160/HDHNTER/MK12ModH-IRHMKII_zps830bd7a8.jpg
Seekins build. I forgot I needed a scope and bought a new dpms G2.
http://tapatalk.imageshack.com/v2/14/12/29/47497e4c4b1ec2a3fdf1403ae546151f.jpghttp://tapatalk.imageshack.com/v2/14/12/29/120967733559561771b133409d4dca8d.jpg
Sent from my iPhone using Tapatalk
Bill Alexander
12-30-14, 16:32
30745
338 Lapua semi auto test mule rifle. Steiner 5-25x56 in Seekins rings. This is one of the early mil dot scopes and works great. Thunder Beast Arms flash hider with conversion ring for TBAC 338 silencer.
Doc. Holiday
12-30-14, 16:50
Wow, that's karly Bill!
http://tapatalk.imageshack.com/v2/14/12/30/5740c08c2141438f2480ed234c05d71e.jpghttp://tapatalk.imageshack.com/v2/14/12/30/b61235a414c44d7a994a4f3dac4c79e0.jpg
16" SS Wilson mid length 223 Wylde. I wacked a prairie dog at 590yds with this setup and Fiochi Exacta 77SMK.
I can't wait to see what this does with a full house BH mk262 load and the new 77 TMKs.
http://i297.photobucket.com/albums/mm229/killerchase2000/CSC_0011_zps2dab9b83.jpg
Took some nicer pics of the rifle with the new camera.
Ok let's try this again....what exactly constitutes a "precision" rifle? IMO, slapping a scope on any AR does not make it precision!
A precision match barrel, magnified optics, and a nice 2-stage trigger.
A precision match barrel, magnified optics, and a nice 2-stage trigger.
Oh, oh. You fed the troll. :)
Sent from my iPhone using Tapatalk
SeriousStudent
01-03-15, 13:13
This is a picture-posting thread. If people want to create a thread about what constitutes a precision rifle, they need to do it outside this thread.
If you want to be a problem child and instigate fights in every thread you post in, then you need to find another forum.
http://tapatalk.imageshack.com/v2/15/01/05/6e6dfa33f36d8a33f2f873336314cab9.jpg
Sent from my iPhone using Tapatalk
http://i1372.photobucket.com/albums/ag348/GMTG_Tactical/GMTGTactical0550_zpse793a486.jpg (http://s1372.photobucket.com/user/GMTG_Tactical/media/GMTGTactical0550_zpse793a486.jpg.html)
Doc. Holiday
01-07-15, 20:56
Nice pictures Whiskey! Digging your action pics.
Nice pictures Whiskey! Digging your action pics.
Thanks Doc!
http://i1372.photobucket.com/albums/ag348/GMTG_Tactical/GMTGTactical00212_zpsafb972fc.jpg (http://s1372.photobucket.com/user/GMTG_Tactical/media/GMTGTactical00212_zpsafb972fc.jpg.html)
Wears a ACS-L now, but this is my semi-auto precision rifle.
18" AR Performance 6.8x43
MI G2SS 15"
Geissele SSA
Viper PST 2.5-10x44
http://i1199.photobucket.com/albums/aa464/jmnielsen1/2014-07/2CB4047E-A720-4A67-892B-119CCE54A913_zpsx7zuh17o.jpg (http://s1199.photobucket.com/user/jmnielsen1/media/2014-07/2CB4047E-A720-4A67-892B-119CCE54A913_zpsx7zuh17o.jpg.html)
5 shot group of Speer 90 TNTs
http://i1199.photobucket.com/albums/aa464/jmnielsen1/null_zps1134c3ef.jpg (http://s1199.photobucket.com/user/jmnielsen1/media/null_zps1134c3ef.jpg.html)
And another 5 shot group of 110 HPBT
http://i1199.photobucket.com/albums/aa464/jmnielsen1/null_zps26227913.png (http://s1199.photobucket.com/user/jmnielsen1/media/null_zps26227913.png.html)
What is this app?
Dirtyboy333
01-22-15, 19:46
I think it's called ballistic if it's the same one have. I love it
Yeah, it definitely looks like the ballistic app. It is awesome but it takes some getting used to. There are so many different input variables and stuff to figure out. It can be very overwhelming at first
Finally got to shoot my BCM this last week. Weather wasnt great but there was little wind. I was just sighting it in with Freedom Munitions 55grn ball but my buddy gave me half a box of Black Hills 77grn SMK that his Mk12 build doesnt like much. Well my rifle seems to like it a lot. Mind you Im still rocking a milspec trigger.
Edit: The picture is a bit small but is measures at .758 inches.
http://i297.photobucket.com/albums/mm229/killerchase2000/TgtGfx_zpszsgq4akf.jpg
Sweet, I have a PSL that we had to use a Moisin Nagant barrel as we could not find a original PSL barrel and the ones we did were out of the ball park. You have a very nice rifle, how does it shoot for you?
I bought a matched billet set and finally completed the custom build. Here it is.
Doc. Holiday
02-19-15, 09:01
I've seen their 300 win mag rifle video. Pretty impressive!
I've seen their 300 win mag rifle video. Pretty impressive!
You should see their neighbor companies SI-Defense and Miller Precision Arms. The got also a 300 Win Mag as well.
MK12 Mod-H yote stick
http://i47.photobucket.com/albums/f160/HDHNTER/ModHOps12thIRMKII_zps8dbe3350.jpg
http://i47.photobucket.com/albums/f160/HDHNTER/77grCBCThermal_zps83d575c1.jpg
With the MK4 MR/T it's .5 MOA capable but hard to pull off groups that tight w/ thermal.
http://i47.photobucket.com/albums/f160/HDHNTER/IMG_20141217_162400254_HDRMedium_zps3cb8dcf3.jpg
http://i47.photobucket.com/albums/f160/HDHNTER/CBC77gr_zpsa438e48e.jpg
el_chingoton13
02-19-15, 13:26
Bartlein Barreled Recce Carbine
http://i19.photobucket.com/albums/b188/el_chingoton13/764fb9ff-9951-4fba-bbf4-9a269add8416_zpsc45be2be.jpg
http://i19.photobucket.com/albums/b188/el_chingoton13/b5bcc519-8b9c-4c56-af4f-c8082220ec1e_zps212ad5ab.jpg
Best group so far with 69 grain GMM
http://i102.photobucket.com/albums/m119/HD1911/Mobile%20Uploads/163C179C-4350-452F-893D-440BE0A476A6_zpsukjo0k9x.jpg (http://s102.photobucket.com/user/HD1911/media/Mobile%20Uploads/163C179C-4350-452F-893D-440BE0A476A6_zpsukjo0k9x.jpg.html)
31849
Ok, I'm getting on this train :)
Received my HCS MK12 Mod 0 yesterday.
http://i907.photobucket.com/albums/ac275/tyhockstaff/IMG_2678_zpsnnno0cpz.jpg
http://i907.photobucket.com/albums/ac275/tyhockstaff/50b5a6f5-b84d-41cf-a5fc-e3cc64694830_zpsmx4dcjpf.jpg
http://i907.photobucket.com/albums/ac275/tyhockstaff/IMG_2685_zpsb4kd1ohv.jpg
http://i.imgur.com/hlXBFPs.jpg
waveslayer
02-28-15, 13:57
http://i907.photobucket.com/albums/ac275/tyhockstaff/IMG_2678_zpsnnno0cpz.jpg
http://i907.photobucket.com/albums/ac275/tyhockstaff/50b5a6f5-b84d-41cf-a5fc-e3cc64694830_zpsmx4dcjpf.jpg
http://i907.photobucket.com/albums/ac275/tyhockstaff/IMG_2685_zpsb4kd1ohv.jpg
At what distance are those groups?
waveslayer
02-28-15, 13:58
Rock River Arms R3 at 100 yards with 77SMK's. The squares are 1"
http://tapatalk.imageshack.com/v2/15/02/28/706fb66ede8b4f377cf2c61c1841e979.jpg
Updated pic. http://tapatalk.imageshack.com/v2/15/03/04/cc5e815f6962f2ff52d243746df26636.jpg
At what distance are those groups?
100 yds 55g (Wolf gold) .223: 1.036/1.536/1.526/1.026/1.027 avg:1.230=1.174 MOA
Best 5 shot group of the day with Wolf was .48 MOA
No bench, no bi pod, no rear squeeze.....all field drop prone off bag.
MK12 Mod-H yote stick
http://i47.photobucket.com/albums/f160/HDHNTER/ModHOps12thIRMKII_zps8dbe3350.jpg
http://i47.photobucket.com/albums/f160/HDHNTER/77grCBCThermal_zps83d575c1.jpg
With the MK4 MR/T it's .5 MOA capable but hard to pull off groups that tight w/ thermal.
http://i47.photobucket.com/albums/f160/HDHNTER/IMG_20141217_162400254_HDRMedium_zps3cb8dcf3.jpg
http://i47.photobucket.com/albums/f160/HDHNTER/CBC77gr_zpsa438e48e.jpg
What ammo are you shooting?
Similiar build, haven't had any 77gr OTM but w/ 69gr it's right at sub-moa to moa.
What ammo are you shooting?
Similiar build, haven't had any 77gr OTM but w/ 69gr it's right at sub-moa to moa.
CBC or IMI 77gr OTM for target shooting (group pics posted were shot with CBC but IMI prints just as well).
BH 77gr TMK for hunting.
@100 an SMK slipped right on through, jug didn't budge.... but the TMK load behaves much differently.
http://youtu.be/bykVqhkJtZ0
Still cleaning the oil that was shipped on the lower off but here are a few pictures of my PredatOBR in 762.
https://farm9.staticflickr.com/8674/16540644458_0df9fc5c5b_b.jpg (https://flic.kr/p/rcD8k9)SD8A1411-Edit.jpg (https://flic.kr/p/rcD8k9) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
https://farm9.staticflickr.com/8609/16727139062_de52323d24_b.jpg (https://flic.kr/p/ru7XFm)SD8A1424-Edit.jpg (https://flic.kr/p/ru7XFm) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
https://farm9.staticflickr.com/8573/16540794840_21c9cf11d7_b.jpg (https://flic.kr/p/rcDU2W)SD8A1413-Edit.jpg (https://flic.kr/p/rcDU2W) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
https://farm8.staticflickr.com/7623/16741246181_fd8f21e7be_b.jpg (https://flic.kr/p/rvngex)Mags-1188-Edit.jpg (https://flic.kr/p/rvngex) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
https://farm9.staticflickr.com/8755/16983429691_69a2f60650_b.jpg (https://www.flickr.com/photos/101418915@N07/16983429691/)
Untitled (https://www.flickr.com/photos/101418915@N07/16983429691/) by corycop25 (https://www.flickr.com/people/101418915@N07/), on Flickr
el_chingoton13
03-30-15, 20:34
Ooooooo let's see the whole thing!
Do you have to get a drivers license for that? Man, that some equipment right there!
Was that barrel factory dimpled or was it done by a third party? Looks like you could lose a lot of weight with that dimple design
Would love to know how you compare the two rifles? Meaning as far as overall best value for the money.
That thing looks deadly. How accurate is it compared to something like a LMT MWS or sr25?
Rifle is almost finished fellas....
Teasers for now.....
Lilja 18.5 223 Wylde 1/8 dimpled by Precision Firearms in WV.
https://farm8.staticflickr.com/7593/16364224573_d1a8e606b9_b.jpg (https://www.flickr.com/photos/101418915@N07/16364224573/)
Untitled (https://www.flickr.com/photos/101418915@N07/16364224573/) by corycop25 (https://www.flickr.com/people/101418915@N07/), on Flickr
This thing is crazy accurate. Using magtech 77gr OTM ammo was no problem shooting less than an inch with heavy wind today....
https://farm9.staticflickr.com/8737/16414749553_7f4a26a236_b.jpg (https://www.flickr.com/photos/101418915@N07/16414749553/)
Untitled (https://www.flickr.com/photos/101418915@N07/16414749553/) by corycop25 (https://www.flickr.com/people/101418915@N07/), on Flickr
https://farm8.staticflickr.com/7680/16827497777_3c37966fd0_b.jpg (https://www.flickr.com/photos/101418915@N07/16827497777/)
Untitled (https://www.flickr.com/photos/101418915@N07/16827497777/) by corycop25 (https://www.flickr.com/people/101418915@N07/), on Flickr
https://farm8.staticflickr.com/7643/16847104308_08637e16a7_b.jpg (https://www.flickr.com/photos/101418915@N07/16847104308/)
Untitled (https://www.flickr.com/photos/101418915@N07/16847104308/) by corycop25 (https://www.flickr.com/people/101418915@N07/), on Flickr
Finished a new rifle this weekend and just had time to zero and shoot a couple of groups at 100 yards before Easter dinner with the family.
https://farm8.staticflickr.com/7621/16866495097_2617770ce3_b.jpg (https://flic.kr/p/rGrcnB)2015-04-05 08.48.18 (https://flic.kr/p/rGrcnB) by cutamerc (https://www.flickr.com/people/118011648@N08/), on Flickr
I have 3 other DD barrels so I am familiar with their accuracy, but I was frankly astounded with the results from this chrome lined lightweight example. The first group was ~0.8", the second under 0.5" as seen below. Both with five rounds of BH mk262 and a humble Redfield Revolution 2-7x. Total weight of the rifle including optics as show is a meager 7.10 pounds.
My apologies for the ruler, I didn't have my calipers.
https://farm8.staticflickr.com/7722/16895367588_6dfeae4c3d_c.jpg (https://flic.kr/p/rJZbab)2015-04-04 18.55.23 (https://flic.kr/p/rJZbab) by cutamerc (https://www.flickr.com/people/118011648@N08/), on Flickr
I thoroughly enjoy the rifles in this thread, keep up the good work.
https://youtu.be/Cr6-x8XF3gs
legumeofterror
04-18-15, 22:14
http://i12.photobucket.com/albums/a248/LegumeOfTerror/IMG_0016_zpsptq2tehr.jpg (http://s12.photobucket.com/user/LegumeOfTerror/media/IMG_0016_zpsptq2tehr.jpg.html)
http://i82.photobucket.com/albums/j248/87228/e541fe24-f2f9-4326-bbf7-76a7d7d16a34_zpshnwbbrzk.jpg (http://s82.photobucket.com/user/87228/media/e541fe24-f2f9-4326-bbf7-76a7d7d16a34_zpshnwbbrzk.jpg.html)
I know what club Cory was at just by the benches. Nice rifle Cory.
Thanks Rob!
I think I'm going to join there. This long range stuff is starting to grow on me. I was there as a guest, it was my first visit. I normally shoot at Topton.
Its a great club. We were shooting on the 300yd range earlier in the week.
https://farm6.staticflickr.com/5344/17127193644_c2e835c9f0_b.jpg
https://farm9.staticflickr.com/8767/17127191444_7bacf26bf3_b.jpg
CrazyIrishman
05-16-15, 21:03
https://farm6.staticflickr.com/5344/17127193644_c2e835c9f0_b.jpg
https://farm9.staticflickr.com/8767/17127191444_7bacf26bf3_b.jpg
Mr. Colter I am seriously envious of this rig. What scope mount and barrel are you running on her?
Mr. Colter I am seriously envious of this rig. What scope mount and barrel are you running on her?
Thanks!
Here's the full specs:
Upper:
- MEGA Arms billet upper
- Rainier Arms UltraMatch 18" Stainless SPR barrel
- AAC M4-2000 Suppressor
- Geissele 15" SMR Mk2 rail
- Syrac Ordnance GenII adjustable gas block
- BCM BCG
- AAC muzzle brake
- Vortex Viper PST 6-24x50 scope
- American Defense Recon scope mount
- BCM Gunfighter charging handle (Large latch)
- Harris bi-pod on an American Defense QD mount w/ spiked feet
Lower:
- MEGA Arms Ambi billet lower
- Geissele Hi-Speed National Match trigger
- Battle Arms Development selector
- Forward Control Designs ABC/R bolt catch
- Battle Arms Development magazine release
- Magpul PRS stock
- Accu-Shot BT12-QK monopod
- Magpul K2+ grip
- BCM Rifle extension
- Sprinco 'Green' spring with standard rifle buffer
CrazyIrishman
05-16-15, 22:29
- Rainier Arms UltraMatch 18" Stainless SPR barrel
-Syrac Ordnance GenII adjustable gas block
-American Defense Recon scope mount
-American Defense QD mount
-Geissele Hi-Speed National Match trigger
-vltor a5 and springco green spring
All the above are sitting in my shop at the moment I can't wait till I get this 18 precision project together for (just punching holes in paper). I was contemplating the geissele rail today actually. Whats your take on the rail,syrac adj. gas block, and the 18in shilen? Also how much use you got out of them?
- Rainier Arms UltraMatch 18" Stainless SPR barrel
-Syrac Ordnance GenII adjustable gas block
-American Defense Recon scope mount
-American Defense QD mount
-Geissele Hi-Speed National Match trigger
-vltor a5 and springco green spring
All the above are sitting in my shop at the moment I can't wait till I get this 18 precision project together for (just punching holes in paper). I was contemplating the geissele rail today actually. Whats your take on the rail,syrac adj. gas block, and the 18in shilen? Also how much use you got out of them?
All the parts are top notch and come together to make a great shooting, and very solid rifle. The adjustable gas block isn't really needed with an 18" rifle-length gassed barrel, but it does give you the ability to gas it down to a point there is zero recoil either with the can or without it. I'm watching my shots impact at 300 because the gun just doesn't move. I love the Geissele rail. It's well machined and well thought out. It's very rigid, which was perfect for this build.
Here's a few groups using Hornady 75gr BTHP hand loads @ 2750fps:
100 yards
https://farm4.staticflickr.com/3950/15455271879_ea8d851c98_b.jpg
300 yards
https://farm4.staticflickr.com/3952/15455271849_f671d50fbb_b.jpg
The rifle is a flat out shooter and the only real limit as far as I can tell is me sitting behind it. You'll be more than happy with a similar setup.
Dirtyboy333
05-17-15, 08:41
I believe thecolter and onyx are who convinced me of the shilen and I'm most grateful because that barrel is amazing. Mine loves 73gr berger bthp. This is the last time I shot this gun and I posted it in another thread a while back. http://i1230.photobucket.com/albums/ee498/Dirtyboy333/20150303_191556_zpsaabiyse4.jpg (http://s1230.photobucket.com/user/Dirtyboy333/media/20150303_191556_zpsaabiyse4.jpg.html)
http://i1230.photobucket.com/albums/ee498/Dirtyboy333/20150301_134001_zpsk5kld1in.jpg (http://s1230.photobucket.com/user/Dirtyboy333/media/20150301_134001_zpsk5kld1in.jpg.html)
http://i1230.photobucket.com/albums/ee498/Dirtyboy333/4B8A9A5B-B388-4162-8FDD-6A633A2314E0_zpsobiytskz.jpg (http://s1230.photobucket.com/user/Dirtyboy333/media/4B8A9A5B-B388-4162-8FDD-6A633A2314E0_zpsobiytskz.jpg.html)
A little side note: when I shot this it was during an almost unprecedented cold spell here and when I finish shooting all those rounds, I was so cold I admittedly jumped in my truck and drove to the target to get it. Fast forward 6 weeks: I'm sitting at my house and 2 game wardens show up at my house like they're ready to raid my place. One young lady in training and another guy. Anyway instead of saying something to me the guy over at the pistol range video taped me driving. I always take care of the game land range and put targets in middle of backboard etc. Just this one day It cold combined with some laziness. So, this target ended up costing me big money. Not sure if it was worth it or not until II find out exactly how much.haha
CrazyIrishman
05-17-15, 18:40
That was the thread(18in precision rifle gas thread) I read also Dirty boy, and I knew it was Mr.onyx but I didn't realize Mr.Colter that spoke so highly of the shilen, as so many others seem to also, I must admit all three of you helped guide me that direction months ago.(thank you guys for such factual non-biased information that's why I've came to like this forum so much in recent years)I don't seem to see as many others speaking as highly of the Douglas even though its defiantly good enough for what it was designed for. I also saw where you posted that target in the moa Challenge Dirty boy, sorry to hear it cost you a chunk of change I hope they understand it was just a honest mistake. Thank You so much dirtyboy,Onxyz, and thecolter. All of yow have helped me more than you know.Now I've just got to get around to telling Pappabear, Markm, and Molon the same. The way all of you have presented data and info, in this hobby of ours... well lets just say its more professional than I've seen others present facts at their Jobs!
http://i47.photobucket.com/albums/f160/HDHNTER/HollandAEM2_zpspfrubuse.jpg
http://i47.photobucket.com/albums/f160/HDHNTER/Mk12ModHAEM2_zpsfpkjcwxl.jpg
Beautiful rifles here.... :)
https://c1.staticflickr.com/9/8818/17031676757_7d58a8977e_b.jpg (https://flic.kr/p/rX2N8g)IMG_4374 (https://flic.kr/p/rX2N8g) by splittiebus 66 (https://www.flickr.com/photos/96653819@N04/), on Flickr
As she sits now
POF lower
Stag LPK
3.5lb springs
Hand polished trigger
CAA adjustable grip
Standard buffer kit
"A2" stock for now....
Custom run Molan Labe upper made at the shop that made the POF lowers.
Nickel boron BCG
Mega 18" barrel
Adjustable low pro gas block
Fortis SWITCH 15" hand guard
Silencer co muzzle brake
Five 20rd magpul mags,
One lancer 5rd mag
Team waren mount with 45 offset
Dr reflex sight on the 45 mount
To do
Omega suppressor
Bi pod
Percision stock
More mags :-)
Good glass
Paint
...
6.5 creedmore upper
http://i44.photobucket.com/albums/f31/20ozjolt/ar%20in%20308/67600845d089c647dc507d98359426cc_zpsz939gtns.jpg
http://i44.photobucket.com/albums/f31/20ozjolt/ar%20in%20308/2f51bbfbc43ab030d22af6b664028777_zpshcz2ffbu.jpg
http://i44.photobucket.com/albums/f31/20ozjolt/ar%20in%20308/cc07df118ef1a55ea6b6ba3d7f7ffb8c_zps1hm9gfgo.jpg
machinegunphilip
07-04-15, 19:07
Vepr 7.62x54r with red star arms adjustable trigger :)
34006
https://c1.staticflickr.com/1/465/19414117282_ca608e4a57_c.jpg (https://flic.kr/p/vzyqG3)Untitled (https://flic.kr/p/vzyqG3) by Austin Scott (https://www.flickr.com/photos/kiowadriver/), on Flickr
My first precision build using my existing lower.
LOWER:
Anderson
Geiselle SSA-E
Magpul ACS-L
BCM mod3 grip
H3 buffer
Tactical Link battery assist lever
UPPER:
BCM4
Lija 24", 4 groove, 8 twist, rifle length gas, .093" gas hole
MI .936" low profile gas block, 3 setscrew fasteners
PWS 15" keymod free float rail
DD keymod bipod adapter
BCM bcg
BCM mod4 CH
Leupold MK2 IMS 1" scope mount
Leupold Mark AR 6-18X40mm
Harris bipod
This is going to be a bench and prone rifle single loading from a Bobsled.
Full weight about 11 lbs.
Clarence
My new Centurion Arms built RECCE.
- Centurion Arms complete Upper Reciever
- Lilja 16" RECCE Barrel
- Nightforce NXSc 2.5-10x24 Mil ZS optic
- KAC High Scope Mounts
- KAC FF RAS
- KAC Flip up front & rear sights
- KAC Harris Bipod mount
- Harris Bipod
- SOPMOD Stock
- Geissele Hi-Speed Designated Marksman Rifle (DMR) trigger
- SureFire FH556-212A Flash Hider and Suppressor Adapter 5.56
http://img.photobucket.com/albums/v74/va_dinger/IMG_0486_1.jpg~original (http://smg.photobucket.com/user/va_dinger/media/IMG_0486_1.jpg.html)
Lancer Dan
08-18-15, 07:16
Hi All,
My name is Dan and I am the tech support guy for Lancer Systems.
I recently joined m4carbine to enjoy the camaraderie and answer any tech questions that may pertain to Lancer's products.
I look forward to being part of this community.
We just finished this yesterday for me.
No more borrowing one of the company's rifles :D
Lancer Systems L30 LTR kit
Bartlein 24" barrel w/ 1-11.25 twist and target crown, chambered in 308 Win Match
SLR Gas Blcok
Rubber City Armory HP BCG
LMT DMR Stock
Geissele High Speed NM DMR Trigger
Sightron SIII 8-32X56 w/ 1/8 MOA turrets in EGW Low Rings and Vortex scope level
Sinclair Gen 2, F-Class bipod
Benchrest grip from our armorer's personal stash
This originally came with a full-length, 20MOA rail but we chopped one down to get the scope closer to the bore.
It's primarily set up for F/ TR.
34666
34665
34664
Hi All,
My name is Dan and I am the tech support guy for Lancer Systems.
I recently joined m4carbine to enjoy the camaraderie and answer any tech questions that may pertain to Lancer's products.
I look forward to being part of this community.
We just finished this yesterday for me.
No more borrowing one of the company's rifles :D
Lancer Systems L30 LTR kit
Bartlein 24" barrel w/ 1-11.25 twist and target crown, chambered in 308 Win Match
SLR Gas Blcok
Rubber City Armory HP BCG
LMT DMR Stock
Geissele High Speed NM DMR Trigger
Sightron SIII 8-32X56 w/ 1/8 MOA turrets in EGW Low Rings and Vortex scope level
Sinclair Gen 2, F-Class bipod
Benchrest grip from our armorer's personal stash
This originally came with a full-length, 20MOA rail but we chopped one down to get the scope closer to the bore.
It's primarily set up for F/ TR.
34666
34665
34664
Nice brutha and welcome
Doc. Holiday
08-18-15, 12:27
Hi All,
My name is Dan and I am the tech support guy for Lancer Systems.
I recently joined m4carbine to enjoy the camaraderie and answer any tech questions that may pertain to Lancer's products.
I look forward to being part of this community.
We just finished this yesterday for me.
No more borrowing one of the company's rifles :D
Lancer Systems L30 LTR kit
Bartlein 24" barrel w/ 1-11.25 twist and target crown, chambered in 308 Win Match
SLR Gas Blcok
Rubber City Armory HP BCG
LMT DMR Stock
Geissele High Speed NM DMR Trigger
Sightron SIII 8-32X56 w/ 1/8 MOA turrets in EGW Low Rings and Vortex scope level
Sinclair Gen 2, F-Class bipod
Benchrest grip from our armorer's personal stash
This originally came with a full-length, 20MOA rail but we chopped one down to get the scope closer to the bore.
It's primarily set up for F/ TR.
34666
34665
34664
Nice rig! Welcome to M4C!
Here's one I've been playing with recently. Some of it was out of the spare parts bin so there are a few items I wouldn't mind changing, but overall it accomplishes what I want. Shoots a consistent 1moa with 3/4moa groups pretty easily attainable. It likes a pretty firm hold so I added a loop of paracord to a shooting mat and that allows me to really load into the bipod. Not very practical for field use but I like to see what it can do in ideal conditions.
Mostly DD parts, Lothar Walther bbl, Bushnell FFP 3-12.
https://farm6.staticflickr.com/5780/20877890288_c980adc5b4_k.jpg
Long Range Trigger Monkey
09-08-15, 19:44
I just put the finishing touches on my updated recce/DMR. I tried out an 18" barrel but I found myself wanting to go back to a 16" mid-length, it just felt right. I also tried an offset red dot sight but ended up not liking it but I had already moved my Griffin Armament Fail Safe Sights to my 2-gun rifle so I picked up a set of Magpul offsets.
http://i917.photobucket.com/albums/ad20/ShootingVoodoo/IMG_55101_zpsr0k4k83h.jpg (http://s917.photobucket.com/user/ShootingVoodoo/media/IMG_55101_zpsr0k4k83h.jpg.html)
CMT forged upper
BCM Mod 4 CH
CMT FA BCG
Rainier Arms 16" match barrel
Damage Industries Flash Hider (Budget Surefire FH556)
BCM KMR-13
NF 2.5-10X24 mil/mil ZS in NF A191 mount
Magpul MBUS Pro Offset Sights
RRA forged lower
Geissele SSA-E
Magpul BAD lever
Sierra Precision SPR Grip w/ grip tape
Vltor E-Mod stock
Armageddon Gear Precision Rifle Sling
I just put the finishing touches on my updated recce/DMR. I tried out an 18" barrel but I found myself wanting to go back to a 16" mid-length, it just felt right. I also tried an offset red dot sight but ended up not liking it but I had already moved my Griffin Armament Fail Safe Sights to my 2-gun rifle so I picked up a set of Magpul offsets.
http://i917.photobucket.com/albums/ad20/ShootingVoodoo/IMG_55101_zpsr0k4k83h.jpg (http://s917.photobucket.com/user/ShootingVoodoo/media/IMG_55101_zpsr0k4k83h.jpg.html)
CMT forged upper
BCM Mod 4 CH
CMT FA BCG
Rainier Arms 16" match barrel
Damage Industries Flash Hider (Budget Surefire FH556)
BCM KMR-13
NF 2.5-10X24 mil/mil ZS in NF A191 mount
Magpul MBUS Pro Offset Sights
RRA forged lower
Geissele SSA-E
Magpul BAD lever
Sierra Precision SPR Grip w/ grip tape
Vltor E-Mod stock
Armageddon Gear Precision Rifle Sling
Nice set up! What kind of groups have you seen with the Rainier barrel? Im using the same barrel in my Recce build.
Long Range Trigger Monkey
09-09-15, 13:01
You shouldn't worry about the accuracy, one reason I chose the Rainier Arms barrel is their accuracy guarantee, if it doesn't shoot they'll take it back and additionally I bought it from Brownells so if I'm not happy with it, they'll take it back too. That being said, this barrel is living up to the guarantee, I'm getting consistent sub-MOA groups with factory match shooting 77 SMK's. The last regional DMR match that I shot in I nailed a 10" bonus plate at about 445 yards shooting from the sitting off a tie down strap and ended up placing first.
http://i1301.photobucket.com/albums/ag115/Dan_Petrecca_III/20150911_220950_zpsgqwey04g.jpg (http://s1301.photobucket.com/user/Dan_Petrecca_III/media/20150911_220950_zpsgqwey04g.jpg.html)
try this one:
Upper Assembly:
Krieger 20" HCM Hbar 1-7.7 twist barrel chambered in .223 Remington
SLR Rifleworks adjustable gas block
Rock river Arms 15.5 inch TRO Series FF hand guard
DPMS Lo-Pro Heavy Duty slick side upper receiver ('bout 30% thicker than a standard forged upper)
Rubber City Armory nitrided bolt carrier
Young Manufacturing National Match bolt
BCM Gunfighter ambi charging handle
Lower Assembly:
Sig Sauer M400 lower
Magpul PRS stock
Taccom ultra low mass buffer system
Wolff Gun springs action spring
Geissle National Match Hi Speed trigger
Ergo grip
Glass:
Millet LRS-1 5-25X
so far, i have only be able to shoot out to 100 yards. still doing some bullet/load development, but with 53 gr Sierra Matchkings and 55 gr Sierra BlitzKings, it's shooting consistent .50" or so 5 shot groups at 100. it also likes the 69gr and 77gr MatchKings. looking forward to trying those to shoot out to 500 or 600 yards.
Dirtyboy333
09-18-15, 20:09
Awesome!!! I want to get a kreiger one day. It looksvery promising
Awesome!!! I want to get a kreiger one day. It looksvery promising
I hope so. it will probably be able to shoot better than me anyways. ;)
daddyusmaximus
09-19-15, 17:28
You shouldn't worry about the accuracy, one reason I chose the Rainier Arms barrel is their accuracy guarantee, if it doesn't shoot they'll take it back and additionally I bought it from Brownells so if I'm not happy with it, they'll take it back too. That being said, this barrel is living up to the guarantee, I'm getting consistent sub-MOA groups with factory match shooting 77 SMK's. The last regional DMR match that I shot in I nailed a 10" bonus plate at about 445 yards shooting from the sitting off a tie down strap and ended up placing first.
Good to hear about Rainer. I'll be building up a CMMG lower I just got over the winter. Rainer is on my list of possibles.
try this one:
Upper Assembly:
Krieger 20" HCM Hbar 1-7.7 twist barrel chambered in .223 Remington
SLR Rifleworks adjustable gas block
Rock river Arms 15.5 inch TRO Series FF hand guard
DPMS Lo-Pro Heavy Duty slick side upper receiver ('bout 30% thicker than a standard forged upper)
Rubber City Armory nitrided bolt carrier
Young Manufacturing National Match bolt
BCM Gunfighter ambi charging handle
Lower Assembly:
Sig Sauer M400 lower
Magpul PRS stock
Taccom ultra low mass buffer system
Wolff Gun springs action spring
Geissle National Match Hi Speed trigger
Ergo grip
Glass:
Millet LRS-1 5-25X
so far, i have only be able to shoot out to 100 yards. still doing some bullet/load development, but with 53 gr Sierra Matchkings and 55 gr Sierra BlitzKings, it's shooting consistent .50" or so 5 shot groups at 100. it also likes the 69gr and 77gr MatchKings. looking forward to trying those to shoot out to 500 or 600 yards.
well, i gotta admit, this post is to brag a little. been trying different bullets and powders in the Krieger, and i think i finally hit on a winning combo, at least for 100 yards.
55 gr Berger HPBT match flat base bullets on top of 21.0 to 21.4 grains of Reloader 7. all 5 shots at 100 yards. groups were .29", .45", .61", .55". the last group without my induced flyer was 4 shots @ .170"! I guess AR's can shoot up there with the bolt guns. i am a happy camper. ;)
https://c1.staticflickr.com/1/465/19414117282_ca608e4a57_c.jpg (https://flic.kr/p/vzyqG3)Untitled (https://flic.kr/p/vzyqG3) by Austin Scott (https://www.flickr.com/photos/kiowadriver/), on Flickr
What brake is that?
Its a Surefire suppressor adapter/muzzle brake.
They don't make that one anymore do they? What is the overall length it adds to your barrel?
http://i.imgur.com/6qSblq1.jpg
pointblank4445
10-12-15, 21:51
http://i.imgur.com/WkMiDIo.jpg
Looks great Pointblank. You finally got the 1.1-8!
pointblank4445
10-13-15, 06:09
Looks great Pointblank. You finally got the 1.1-8!
It was announced Jan/Feb of 2010....I've been patient. Your collection is looking very fine these days as well.
daddyusmaximus
10-13-15, 10:01
Is that the Leopold? It's the only 1.1-8 I can find on the interwebs.
pointblank4445
10-13-15, 11:36
Is that the Leopold? It's the only 1.1-8 I can find on the interwebs.
Negative ghost rider, It's a Schmidt & Bender
http://40.media.tumblr.com/8485c6dce2ddc411b7107f63d395f46e/tumblr_nvxnx37j9T1td8lf5o1_540.jpg
daddyusmaximus
10-14-15, 11:07
Looked that scope up. Nice piece. Wanna trade for my Nikon 1.5x4.5x20 P-223? I'm thinking my tired old eyes need better glass.
http://i219.photobucket.com/albums/cc306/daddyusmaximus/Guns/RECCE20on20flag20angled_zpslkt6lszv.jpg (http://s219.photobucket.com/user/daddyusmaximus/media/Guns/RECCE20on20flag20angled_zpslkt6lszv.jpg.html)
A little 18" Noveske love.
http://i.imgur.com/DItG3oF.jpg
Received the crowning piece to my Recon rifle today. Just needs a atlas bipod and SSA-E to complete this build.
https://farm1.staticflickr.com/726/23173822161_18c61ce941_z.jpg (https://flic.kr/p/BiMTXX)
"atlas bipod and SSA-E"
Both are great choices.
coolcraigster
11-24-15, 20:08
36163
BRO upper lower
BRO SLIM 17.76" rail
Black Hole/ BRO 20" barrel
Syrac gas block
Magpul UBR stock
Geissele DMR trigger
Atlas PSR bipod
JP silent capture buffer
BRO NiB bolt
Larue grip
Alamo four star DLOC scope mount (awesome mount)
Leupold Mark 4 scope
Raptor ambi charging handle
Few other little nick nacks
Probly the most accurate rifle i have ever shot if i do my part.
coolcraigster
11-24-15, 20:09
Sorry the picture is so small.
BrigandTwoFour
12-08-15, 21:01
A fun little poodle shooter.
https://everydaymarksman.files.wordpress.com/2015/12/img_0517.jpg
Yep, more 18" Noveske.
http://i.imgur.com/2KB281c.jpg
My Colt MT6700 is my precision rifle, I replaced the barrel and trigger and a few other mods. I think it is great that we can modify a semiauto to bolt action groups. The target is just under 130 or 140yds, 10 shots, max range my range has for public use.
https://www.m4carbine.net/attachment.php?attachmentid=36550&d=1450404467
What ammo managed that group past 100 yards?
What ammo managed that group past 100 yards?
Prvi Partizan .223 Rem Match 69 Grain
Looked that scope up. Nice piece. Wanna trade for my Nikon 1.5x4.5x20 P-223? I'm thinking my tired old eyes need better glass.
http://i219.photobucket.com/albums/cc306/daddyusmaximus/Guns/RECCE20on20flag20angled_zpslkt6lszv.jpg (http://s219.photobucket.com/user/daddyusmaximus/media/Guns/RECCE20on20flag20angled_zpslkt6lszv.jpg.html)I just bought that same scope about a month ago but yet to zero it on my Colt Carbine 16". How does it preform?
I'm sure pointblank4445 isn't going to answer that question you asked
http://images.tapatalk-cdn.com/15/12/20/22d58f2b1f3cc47b49eba1e14793ff1d.jpg
Not a glamour shot but just finished this up, mainly for coyotes but also for cheaper long range practice than my .308
http://i1199.photobucket.com/albums/aa464/jmnielsen1/E501E8EE-4DC4-492A-AC1E-55B3BAEE064E_zps3mn0anhu.jpg (http://s1199.photobucket.com/user/jmnielsen1/media/E501E8EE-4DC4-492A-AC1E-55B3BAEE064E_zps3mn0anhu.jpg.html)
ARP melonited 18" 223 Wylde 1:8 5R rifle length barrel
Geissele MK4 SMR
Geissele SSA
Vortex 2.5-10x32 FFP with XLR reticle
ADM Recon mount
Have 5 guns to sight in Friday so wont get to shoot it a lot, but hoping to get a feel for it with some 69gr PRVI match.
https://farm6.staticflickr.com/5691/24008338151_a48c774c66_b.jpg
http://i124.photobucket.com/albums/p27/tpe187/IMG_0037_zps3vx8flqj.jpg (http://s124.photobucket.com/user/tpe187/media/IMG_0037_zps3vx8flqj.jpg.html)
KAC SR25 ACC with Leupold Mk6 3-18x with H59 reticle and Aimpoint T1 in offset mount. Bipod is KACs newest offering and exceeds the capability of the Atlas. Accuracy with 168 and 175gr FGMM is between .60 and 1" at 100m for five rounds. If you need a capability beyond 500m but still want to clear rooms, this is the answer!
MK12 MOD0 with 77gr Black Hills OTM at 900 yards.
Video of me shooting.
https://www.youtube.com/watch?v=Q3jD8qE83is
Video of the target.
https://www.youtube.com/watch?v=Hr_FSs4rrNk
http://i209.photobucket.com/albums/bb35/MikeMcCa/Pic3_zpscqqihhew.jpg (http://s209.photobucket.com/user/MikeMcCa/media/Pic3_zpscqqihhew.jpg.html)
My mk12 mod 1 clone. building it as close as possible to the usmc spec, minus scope mount and possibly scope...
Colt upper
colt m16 bcg
HCS douglas barrel
compass lake gas block
and i'm doing a nodak 80% a1 lower, a1 stock, a1 grip, ssa-E
http://i830.photobucket.com/albums/zz221/gamerpilot94/12669438_927488580640175_2212327110882919422_n.jpg (http://s830.photobucket.com/user/gamerpilot94/media/12669438_927488580640175_2212327110882919422_n.jpg.html)
http://i830.photobucket.com/albums/zz221/gamerpilot94/12669629_927488590640174_1953184997442663204_n.jpg (http://s830.photobucket.com/user/gamerpilot94/media/12669629_927488590640174_1953184997442663204_n.jpg.html)
Just finished my mk12, just waiting on my scope mount to come in.
Here's a stupid question(probably) but I'm gonna ask anyway. 300 yd range and farther....it would seem to me that spreads would be more windage than elevation. But on the great groups I see here the extreme spread seems to be more elevation? What variables would cause windage(other than wind. Duh) spreads and what variables would cause elevation spreads(other than velocity)?
Here's a stupid question(probably) but I'm gonna ask anyway. 300 yd range and farther....it would seem to me that spreads would be more windage than elevation. But on the great groups I see here the extreme spread seems to be more elevation? What variables would cause windage(other than wind. Duh) spreads and what variables would cause elevation spreads(other than velocity)?
Gun, loads, shooting position, etc... Details?
100 yards, 77gr OTM Magtech 29 degrees no wind.....
https://farm2.staticflickr.com/1503/25364622892_7f9be01195_k.jpg (https://flic.kr/p/EDojGm)Untitled (https://flic.kr/p/EDojGm) by Cory Fluck (https://www.flickr.com/photos/101418915@N07/), on Flickr
That's a nice little group, Cory
InfiniteGrim
03-08-16, 01:17
Recently replaced a LW-50 barrel with a 1/2 off LaRue. Also replaced the beat up DD handguard with a Geissele blem 15" MK4 MLOK. The rail was much lighter, but the LaRue barrel is much heavier than the LW-50.
Painted it afterwards, ran out of OD before I got to the scope. Now I cannot talk myself back into painting the scope!
https://farm6.staticflickr.com/5674/21062082840_7df164be60_h.jpg
Threw some ammo together with some primed virgin brass I had laying around... I've been itching to try out the Sierra TMK's I recently picked up... Seems like I need to get more in depth with 23.0-23.4gr range.
https://farm2.staticflickr.com/1614/25546339705_c132750dec_b.jpg
coolcraigster
03-08-16, 03:06
Sorry having problems with pics
coolcraigster
03-08-16, 03:23
http://uploads.tapatalk-cdn.com/20160308/1c84242d65652b462a4aa884a49e6ff4.jpghttp://uploads.tapatalk-cdn.com/20160308/e374db713621890b5f404ddb89959c79.jpghttp://uploads.tapatalk-cdn.com/20160308/58c96f5fc11bdfef7398c50e0639aa57.jpghere is my baby
Sent from my SAMSUNG-SM-G900A using Tapatalk
RobertTheTexan
04-03-16, 01:45
http://uploads.tapatalk-cdn.com/20160308/1c84242d65652b462a4aa884a49e6ff4.jpghttp://uploads.tapatalk-cdn.com/20160308/e374db713621890b5f404ddb89959c79.jpghttp://uploads.tapatalk-cdn.com/20160308/58c96f5fc11bdfef7398c50e0639aa57.jpghere is my baby
Sent from my SAMSUNG-SM-G900A using Tapatalk
That's a fine looking SPR Craig.looks outstanding!
I'm working on mine, slowly but surely. I've got everything except the barrel, rail, and optic. (Yes the 3 of some of the most expensive parts.). But I'll get there! Thanks for posting!!
coolcraigster
04-03-16, 02:30
That's a fine looking SPR Craig.looks outstanding!
I'm working on mine, slowly but surely. I've got everything except the barrel, rail, and optic. (Yes the 3 of some of the most expensive parts.). But I'll get there! Thanks for posting!!
Thank you. Yeah it took me a few months to get mine how i wanted it. Do you have a parts list for your rifle? What barrel are you going with?
My 30 Herrett AR.
http://i1052.photobucket.com/albums/s460/Peter_Schiestel/Guns/AR%2015/93663f04a8eefc6580746df58ed084b9_zpssdlclzqj.jpg
http://i1052.photobucket.com/albums/s460/Peter_Schiestel/Guns/AR%2015/b07b7823aa2bd757e109b89fd7fef026_zps5b7qdjgc.jpg
http://i1052.photobucket.com/albums/s460/Peter_Schiestel/Guns/Precision/b46c37a58db4dae2cba8e9797a63b520_zpsg1niitei.jpg
http://i1052.photobucket.com/albums/s460/Peter_Schiestel/Guns/AR%2015/5dac48147665d63213be71ee543a2d57_zpsw2pwvi23.jpg
3892638927
38928
Built my first one recently. Still waiting on the scope to come so I can try her out!
dantheman2
04-17-16, 18:51
Hi,
I'm new to owning an AR-15...shot plenty of M16's and Colt 9mm subs as a LEO. This is my first build which is only a couple of months old. I haven't started reloading for it yet but I can tell you that I can put 9 out of 10 shots within an inch with Federal Match 69 grainer's.
Please forgive the Star Wars Thordsen stock. I live in NY state and would rather shoot it than stash a traditionally built one to make a political point.
38997
38998
38999
Dan
Dirtyboy333
04-17-16, 20:33
Those are looking very nice! Dan, I have never seen a stock like that. Pretty intuitive considering the restrictions. What's the specs on that gun (barrel, bolt etc)?
RobertTheTexan
04-17-16, 21:00
Hi,
I'm new to owning an AR-15...shot plenty of M16's and Colt 9mm subs as a LEO. This is my first build which is only a couple of months old. I haven't started reloading for it yet but I can tell you that I can put 9 out of 10 shots within an inch with Federal Match 69 grainer's.
Please forgive the Star Wars Thordsen stock. I live in NY state and would rather shoot it than stash a traditionally built one to make a political point.
38997
38998
38999
Dan
That does look like it came out of Star Wars Dan! Lol
A good friend told me once, what is the purpose of building/buying a weapon you cannot train with. When the day comes that you need to use it, you're going to be more of a liability than an asset. I agreed then and now.
Oh btw I just picked up a Thordsen cheek weld pistol stock and I will be training with it also.
Does the stock take some getting used to?
dantheman2
04-17-16, 21:28
Those are looking very nice! Dan, I have never seen a stock like that. Pretty intuitive considering the restrictions. What's the specs on that gun (barrel, bolt etc)?
* Stag Lower
*Hipertouch 24 E trigger set at about 2.5 lbs
* Odin extended magazine release (Because the Thordsen stock places one's hand behind the action, changing the ergonomics)
*AXTS Ambi 45 deg safety (Ditto)
* Spike's Carbine Buffer Tube, T2 Buffer and SS Spring
* Thordsen FRS-15 stock
*Troy Triggerguard
The upper is from JSE Surplus
*Wilson Arms 18" Bull Barrel, 223 Wylde
*Aero Precision Upper Receiver
*YHM TJ Handguard
*Warne Skel Mount
*Bushnell Elite Tactical 2.5-16x42 Scope
* Standard Mil Spec Bolt
Don't have an exact weight...I figure about 10.5-11 lbs. I wouldn't want to be humping mountains with it.
Dan
dantheman2
04-17-16, 21:33
That does look like it came out of Star Wars Dan! Lol
A good friend told me once, what is the purpose of building/buying a weapon you cannot train with. When the day comes that you need to use it, you're going to be more of a liability than an asset. I agreed then and now.
Oh btw I just picked up a Thordsen cheek weld pistol stock and I will be training with it also.
Does the stock take some getting used to?
Actually the stock handles like a traditional sporting rifle. It's actually very comfortable. You do need an ambi safety though and an extended magazine release is nice as well because your hand is placed behind the action instead of underneath it, changing the ergonomics some. With these minor changes the rifle handles very well. Just space age looking.
Dan
http://i.imgur.com/vQuobRY.jpg
You have a nice rifle, sir.
RobertTheTexan
04-23-16, 07:43
Built my first one recently. Still waiting on the scope to come so I can try her out!
That's a very nice looking SPR labeef. What's the specs on it? Did you start with an SPR for varmints? What kind of bipod is that? Haven't seen any like that before.
One more thing - what kind of glass are you putting on it?
It's a fine looking AR. Good job!
That's a very nice looking SPR labeef. What's the specs on it? Did you start with an SPR for varmints? What kind of bipod is that? Haven't seen any like that before.
One more thing - what kind of glass are you putting on it?
It's a fine looking AR. Good job!
Thanks man! I really like it so far. Here's a few of the main components,
20" barrel from ballistic advantage
Geissele smr mk4 15"
Northtech upper and lower
Geissele trigger
Magpul prs
There's lots more and I can email you the spreadsheet of all the parts if ya want.
I built it for prairie dogs primarily. The bipod is from vltor and I really like it because it makes the rifle sit really low and steady.
I recently got a trijicon accupower 4-16 power on sale and have yet to mount it and try her out.
Labeef
RobertTheTexan
04-23-16, 14:22
Thanks man! I really like it so far. Here's a few of the main components,
20" barrel from ballistic advantage
Geissele smr mk4 15"
Northtech upper and lower
Geissele trigger
Magpul prs
There's lots more and I can email you the spreadsheet of all the parts if ya want.
I built it for prairie dogs primarily. The bipod is from vltor and I really like it because it makes the rifle sit really low and steady.
I recently got a trijicon accupower 4-16 power on sale and have yet to mount it and try her out.
Labeef
Prairie dogs? Makes perfect sense. I looked at your handle and saw "beef" saw the open ranch-like land in the background of your photo and guessed it was something to do with critters. My best man at my wedding (previous marriage) was from Montana and we used to shoot the prairie dogs on his wife's ranch. Holes are hell on cattle.
Well you have some solid parts on that AR. I'm a huge fan of ballistic advantage barrels. I have a 14.5 and am waiting for the 18" to get back in stock and I'll be picking up a 10.5 soon. They are great barrels.
For your first AR you did a fantastic job!
Prairie dogs? Makes perfect sense. I looked at your handle and saw "beef" saw the open ranch-like land in the background of your photo and guessed it was something to do with critters. My best man at my wedding (previous marriage) was from Montana and we used to shoot the prairie dogs on his wife's ranch. Holes are hell on cattle.
Well you have some solid parts on that AR. I'm a huge fan of ballistic advantage barrels. I have a 14.5 and am waiting for the 18" to get back in stock and I'll be picking up a 10.5 soon. They are great barrels.
For your first AR you did a fantastic job!
The beef part is a long story and goes back to my high school football nickname ha. But yes prairie dogs can be a huge problem for cattle.
Sent from my SM-G900V using Tapatalk
RobertTheTexan
04-23-16, 14:28
The beef part is a long story and goes back to my high school football nickname ha. But yes prairie dogs can be a huge problem for cattle.
Sent from my SM-G900V using Tapatalk
Well it was that or you were fond of French McDonalds. Just kidding LOL. Prairie dogs are an excellent training tool for your medium distance shots.
Here is my 18" Noveske. I recently added the Kahles K16i 1-6X24. I love this set-up.
http://i1174.photobucket.com/albums/r614/FN-2187/Noveske%202_zpsjyehetrx.jpg (http://s1174.photobucket.com/user/FN-2187/media/Noveske%202_zpsjyehetrx.jpg.html)
Another 30 Herrett from ARP.
http://i1052.photobucket.com/albums/s460/Peter_Schiestel/Guns/AR%2015/b9024d221bb39fe0fb9ee5627db1d282_zpsxutcg4vx.jpg
http://i1052.photobucket.com/albums/s460/Peter_Schiestel/Guns/AR%2015/00830b445158051dbf73a88abd936136_zps965e5ihw.jpg
mattpittinger
06-06-16, 21:02
https://vimeo.com/169635193
BPM SPR with Nikon 4-16 mildot on my SBR lower.
Sent from my iPhone using Tapatalk
mattpittinger
06-20-16, 09:37
http://uploads.tapatalk-cdn.com/20160620/9c842c1aed7ea4ae31e126dcebb80023.jpghttp://uploads.tapatalk-cdn.com/20160620/fa8185eff6b7bc52716f653c0b742888.jpghttp://uploads.tapatalk-cdn.com/20160620/d69bdd024b81c0f121c8d29415f09d73.jpg
My mid-range toys
Barnes machine SPR with Nikon 4-16
PWS MK216 with IOR 1.5-8
Sent from my iPhone using Tapatalk
mattpittinger
07-12-16, 11:30
http://uploads.tapatalk-cdn.com/20160712/8008993544cc05385baca62e717ac9e3.jpg
Sent from my iPhone using Tapatalk
http://uploads.tapatalk-cdn.com/20160724/b4888855bb691307e75ac27402012821.jpg
http://uploads.tapatalk-cdn.com/20160724/af9513bea20fddc738a85a85c713f3b3.jpg
Hit the desert this am. 880 yards and horrible shooting position. It was challenging but fun. Had to hold 1.75 to 4 mils of windage
Boba Fett v2
09-09-16, 14:46
http://uploads.tapatalk-cdn.com/20160907/0f8af8c38a2f57e8e3cc3afa834f7f5b.jpg
MWS DMR configuration currently wearing a S&B 4-16x42 PM II H37 secured in a 20 MOA Spuhr 4602, Saker 7.62, KAC offset BUIS, Harris 9-13 SLM w/ DLOC-S+SARG combo. Other minor upgrades include a KAC ambi CH, QD end plate, trigger guard, Magpul ACS, MOE+ grip and RSA. The factory 20" CL barrel has been ball milled and cut down to 16" and an adjustable gas key has been installed to help control the gas flow into the carrier. It also wears a coat of babyshit RAL-8000 Cerekote. I would also like to add a Geissele DMR trigger at some point and might consider an 18" SS barrel.
RobertTheTexan
09-12-16, 13:50
http://uploads.tapatalk-cdn.com/20160907/0f8af8c38a2f57e8e3cc3afa834f7f5b.jpg
MWS DMR configuration currently wearing a S&B 4-16x42 PM II H37 secured in a 20 MOA Spuhr 4602, Saker 7.62, KAC offset BUIS, Harris 9-13 SLM w/ DLOC-S+SARG combo. Other minor upgrades include a KAC ambi CH, QD end plate, trigger guard, Magpul ACS, MOE+ grip and RSA. The factory 20" CL barrel has been ball milled and cut down to 16" and an adjustable gas key has been installed to help control the gas flow into the carrier. It also wears a coat of babyshit RAL-8000 Cerekote. I would also like to add a Geissele DMR trigger at some point and might consider an 18" SS barrel.
Did you consider having the barrel cut down to 18" instead of 16" or is the 18" tied to the barrel also being stainless?
http://uploads.tapatalk-cdn.com/20160917/d71956ec97f6381ab792515a43788aa2.jpg
New and improved lightweight target. I didn't realize it looked like a teddy bear until after it was made lol.
http://uploads.tapatalk-cdn.com/20160917/fdc75655a47f5cf8c0a8c7b8b76fd0a0.jpg
Sent from my XT1565 using Tapatalk
thirteen/autumns
09-19-16, 12:47
http://uploads.tapatalk-cdn.com/20160917/d71956ec97f6381ab792515a43788aa2.jpg
Nice set up... Where approx. are you located in AZ?
http://i702.photobucket.com/albums/ww21/ryan_raffaele/SPR_zpscexhp0ix.jpg (http://s702.photobucket.com/user/ryan_raffaele/media/SPR_zpscexhp0ix.jpg.html)
Nice set up... Where approx. are you located in AZ?
http://i702.photobucket.com/albums/ww21/ryan_raffaele/SPR_zpscexhp0ix.jpg (http://s702.photobucket.com/user/ryan_raffaele/media/SPR_zpscexhp0ix.jpg.html)
Thank you. The picture was taken in the Sonoran desert national monument BLM land. I live in metro PHX area.
http://uploads.tapatalk-cdn.com/20160920/95c1e8466b45e6176ac75e41434b7c07.jpg
Sent from my XT1565 using Tapatalk
Boba Fett v2
09-19-16, 23:31
Did you consider having the barrel cut down to 18" instead of 16" or is the 18" tied to the barrel also being stainless?
No. The original plan was to cut down the barrel to 16" in order to get the shortest length possible without having to eFile and while retaining a rifle length gas system. I'm still undecided between running this as either a dedicated precision or battle rifle. If I ultimately decide to keep it in a run-and-gun configuration then the 16" configuration is optimal for that purpose. If I decide that I would rather keep this as a dedicated precision rig, then I'll consider going stainless with an 18" barrel. But first I've got to get back out to the range and continue to test it and see if I've resolved the gas issue discussed in the dedicated MWS thread.
RobertTheTexan
09-19-16, 23:53
But first I've got to get back out to the range and continue to test it and see if I've resolved the gas issue discussed in the dedicated MWS thread.
That makes perfect sense. Purpose drives everything.
I'll try to find that thread, I've deal with gas issues on a couple of my weapons, maybe I can help or at least learn something.
http://uploads.tapatalk-cdn.com/20161117/7fd112d12f50c56cc39ff275e69b5384.jpg
My take on a Rainier arms precision build.
Sent from my SM-G920V using Tapatalk
RobertTheTexan
12-07-16, 21:41
Back in April I posted on here, complimenting someones SPR and said I was waiting for my barrel, BCG and trigger. Well, I have those things now, I even have an optic. So I'm ready to post my pics. I'm working on setting up a range so I can get it out and do some work with it, so I owe a range report. It's exciting to have it finished, because when i built my first AR, a 16" DD barreled outfit, I didn't even have an intention of building an SPR (or another AR for that matter.)
Then I saw my friends SPR and knew right then I needed to build one. (SBR"s, Recce's all came in due time also.) So I had to include a pic of it - it is absolutely one of my favorite AR's period, there is just something about it that I like. (Noveske barrel, Noveske switchblock, USO glass, what is not to like??)
First of all, I am not a stylish photographer capture the nuances of light on a cold winter morn. I just take pictures with my iphone and hope for the best.
http://i683.photobucket.com/albums/vv200/robertestx/SPR/80E15A51-F894-4CEC-BA98-C0EC8275E043_zpsdxgnkgvq.jpg
http://i683.photobucket.com/albums/vv200/robertestx/SPR/3ED18CBA-C525-4EA9-AD58-5A01D2E6F57E_zpsrzdzasih.jpg
http://i683.photobucket.com/albums/vv200/robertestx/SPR/1FAA12D7-04D3-42D6-BAA6-8C77699295DD_zpshsziespf.jpg
I really thought this was a cool pic, bipod deployed in a weird position, but AR laid in nice and true.
http://i683.photobucket.com/albums/vv200/robertestx/SPR/35F5E181-FEBD-4873-A027-253B4E2DD6E2_zpsbs4lpwon.jpg
Yes, it's A LOT of scope for a 5.56, but I won't have a problem seeing things I want to shoot anyway. And I also may have a different home for that optic someday. Something with a little more reach.
http://i683.photobucket.com/albums/vv200/robertestx/SPR/FA34B8F9-9535-4E2B-AF97-02BCFCE8DC21_zps5xusetp4.jpg
My SPR has evolved a little during the build process. For example, I started out with a SWFA 10x42 Super Sniper scope. Not a bad scope, not bad glass, but I wanted more. The XTR II has zero Much more. Started out with a KAC 2 stage trigger. Wanted to give the LaRue a shot, besides I have other plans for the KAC 2 stage. As most know, the KAC is a good trigger once she gets broken in. THe MBT-2S is an outstanding trigger in every regard. clean, crisp, short take up. In short I like it. I like the price even more.
Here's a quick run down on parts. Let me know if you have any comments or questions.
Magpul PRS stock (Purchased from the forum with the FDE cheek riser already installed. It just kinda all fell together like that.)
Aero Precision upper and lower
DSG Arms Enhanced LPK (Removed enhanced bolt release for milspec due to bad lever
LaRue MBT-2S two stage trigger
KNS Gen 2 Mod 2 anti-rotate pins
AXTS 45/60 short throw selector switch
Magpul BAD Lever
Ballistic Advantage NiB BCG
LaRue QD LT-104 SPR Mount (Because I had one and I like LaRue mounts
Burris XTR II 5-25 x 50 scope (34mm tubes, and it is a tank) with Butler Creek caps.
G2B Mil-Dot reticl,
Front Focal Plane
Zero Stop
1/10 mil adjustment.
US Optics Swivel ACD (They gave this thing to me believe it or not.)
KAC 0-600 m rear BUIS, KAC Micro front BUIS
Ballistic Advantage 5.56 SPR barrel w/ OPS-12, Performance Series (I"m not running the OPS-12 collar and suppressor)
AAC 51T Muzzle Brake
LaRue Tactical 13.2 rail (Because it is my favorite rail (along with the C4)
Magpul AFG2
A Gazillion LaRue Index Clips
Raptor Charging handle
Hogue oversized grip with storage (for my scope batteries)
Last but definitely not least, BFG Vickers padded sling (because after humping this a while, I was thankful for the padding.
Peleton Tech. notched leg, 9-13" bipod, with pivot and pan. (TipTop)
What you don't see:
AAC 762-SDN-6 suppressor.
My can is still being held hostage by BATF and that is a whole nightmare story in and of itself. (Think gun store owner gets sick, goes into hospital, gun store shuts down. My NFA form 4 now has to be transferred to another LGS and yep, I get to start the process/paperwork ALL OVER FROM SCRATCH again. Heartbreaking. First that the gentleman is so sick, and then the 5 months I had already waited are down the flipping drain. Such is life. Well I got to experience the fingerprints and cool photo app that Silencer Shop has. Silencer Shop did say the ATF had told them they would expedite my application, but I really have no idea what that means.. I hope it means something.
That's it.
I built a chest rig for my SPR, I've got some pics and am thinking about writing a post about it over in Tactical Gear. It's a nice set up.
Thanks for looking.
Someone more experienced than I will confirm, but I am fairly certain that your current lgs absolutely HAS to complete the form 4 transfer, ie the ATF will not give him a choice in the matter, closed store or not.
Sent from my SM-G900P using Tapatalk
RobertTheTexan
12-08-16, 08:32
Someone more experienced than I will confirm, but I am fairly certain that your current lgs absolutely HAS to complete the form 4 transfer, ie the ATF will not give him a choice in the matter, closed store or not.
Sent from my SM-G900P using Tapatalk
And if the owner is in a hospital incapacitated? I do not believe he is in the hospital with a minor complications, I think he really really sick. Who would open the store and hand over my can? This is my first suppressor so maybe anyone can do that, but it doesn't sound right. What if he's not physically able to function? If he passes? Who manages the NFA items?
I will say that there was some speculation there were other more regulatory issues, but I'm going off what Heather at The Silencer Shop told me firsthand. Not sure what she'd gain by lying to me or BATF lying to them about the situation . I'd rather not promote a rumor until I know the facts which all I know is what I've been told.
Sent from my iPhone using Tapatalk
And if the owner is in a hospital incapacitated? I do not believe he is in the hospital with a minor complications, I think he really really sick. Who would open the store and hand over my can? This is my first suppressor so maybe anyone can do that, but it doesn't sound right. What if he's not physically able to function? If he passes? Who manages the NFA items?
I will say that there was some speculation there were other more regulatory issues, but I'm going off what Heather at The Silencer Shop told me firsthand. Not sure what she'd gain by lying to me or BATF lying to them about the situation . I'd rather not promote a rumor until I know the facts which all I know is what I've been told.
Sent from my iPhone using Tapatalk
From what I have come to understand, someone who is associated with the shop (ie a wife or co-owner) will have to finish all pending form 3's and 4's, even if said shop has closed. Again, I could be wrong, and have completely misread what I saw.
Sent from my SM-G900P using Tapatalk
How loud is that brake? My Griffin m4sd brake made me lose my hearing for a week. Your build looks real nice 👍
Sent from my XT1650 using Tapatalk
RobertTheTexan
12-08-16, 11:21
How loud is that brake? My Griffin m4sd brake made me lose my hearing for a week. Your build looks real nice [emoji106]
Sent from my XT1650 using Tapatalk
Thanks labeef. The AAC Brake is loud and obnoxious. Lol but I didn't want to install something like a Battle Comp just to remove it when I get my can. Of course that was originally supposed to be in Jan (give or take)
The AAC Brake being a little easier on the suppressor than their 51T FH is the main reason I went with brakes er their FH or their hybrid. But yeah, it's loud. I have one on my SBR as well and It's not a "neighbor-friendly" muzzle device. Lol
Sent from my iPhone using Tapatalk
I understand your logic completely. Waiting for hpa of 2015 to get passed or a surplus of $$ to buy a can. I foresee waiting a long time though..
Sent from my XT1650 using Tapatalk
mattpittinger
12-12-16, 21:34
http://uploads.tapatalk-cdn.com/20161213/27d2c6e040dece9773f960315e9efd5d.jpg
300 Blackout 8".
Not a long range precision rifle, but under 200yds, I can put them under and inch, and it's quiet as a 22LR
Sent from my iPhone using Tapatalk
I finished this build a couple months ago and have been shooting it quite a bit. It has been a lot of fun.
http://i58.photobucket.com/albums/g258/SevenSam7/Pic%201_zps4txxq2or.jpg (http://s58.photobucket.com/user/SevenSam7/media/Pic%201_zps4txxq2or.jpg.html)
mattpittinger
12-30-16, 22:26
http://uploads.tapatalk-cdn.com/20161231/9fbb508e02f81d1dbf8440b59aefeb08.jpg
18" 300 Win Mag Nemo Recon
5-25 ATACR Nightforce
https://vimeo.com/197575708
Sent from my iPhone using Tapatalk
InfiniteGrim
12-31-16, 00:33
Edit.
first day ever to shoot past 200 yards... nailed the 12" gong @ 909 yards with the first 2 rounds down range...
I am sure that was a good feeling. Nice shooting.
InfiniteGrim
12-31-16, 18:55
I am sure that was a good feeling. Nice shooting.
Sadly couldn't get our friend on the plate
hotrodder636
02-12-17, 18:58
Nice looking. Curious as to your choice on the grip for the Aero M5, any particular reason on it?
https://uploads.tapatalk-cdn.com/20170212/3628632480e78a5e595b7f4361358e0c.jpg
Springfield m1a scout squad with a vltor stock
My vortex crossfire ii comes next week
And here is the aero precision m5 with 18" stainless barrel and Geissele dmr trigger and vortex viper 2.5-10 x 32 ffp scope
https://uploads.tapatalk-cdn.com/20170212/b9d5f21bb86477603cd3b182873fc6b4.jpg
Sent from my iPhone using Tapatalk
FireandFlames
03-14-17, 19:44
http://i66.tinypic.com/2r3z987.jpg
Grey ghost specter heavy with vortex viper pst 4-16x50 ffp in adm recon 20moa mount, lone star aci/level, surefire socom brake, pri gasbuster ch, geissele high speed dmr trigger, and surefire 7.62 socom mini in Bergspitze custom cover. It's essentially a factory built mega maten, one of the best deals in precision gas guns imho. Shoots less than a minute with everything I feed it and 168gr fgmm comes in right around 3/4 moa. I wasn't going to go spend 5 grand on a kac rifle that I essentially have access to at work, maybe one day. This thing shoots and shoots well.
Nice looking. Curious as to your choice on the grip for the Aero M5, any particular reason on it?
Sorry for the late response or my response got deleted by a special person. So anyways the a2 grip is there because my moe k grip hadn't arrived yet
Sent from my iPhone using Tapatalk
10/22 full KIDD (minus receiver) build
http://i1039.photobucket.com/albums/a477/nfd538/Mobile%20Uploads/2952ED1F-C914-4DD3-96C0-531FF6FE3345_zpstiv1dtfi.jpg (http://s1039.photobucket.com/user/nfd538/media/Mobile%20Uploads/2952ED1F-C914-4DD3-96C0-531FF6FE3345_zpstiv1dtfi.jpg.html)
Knight's Armament Company (KAC) SR-25 EMC
- Knight's Armament 34mm Scope Mount
- Leupold Optics Mark 8 1.1-8x24mm CQBSS H27D
- BT10-LW17 V8 Atlas Bipod
- Magpul ACS-L Stock
- Magpul MIAD GEN 1.1 Grip
http://i640.photobucket.com/albums/uu125/986S/AA1A49F4-4BA1-4372-8BF6-3470CE8184E3_zpsiyryw69a.jpg (http://s640.photobucket.com/user/986S/media/AA1A49F4-4BA1-4372-8BF6-3470CE8184E3_zpsiyryw69a.jpg.html)
Switchblade666
03-30-17, 00:23
-Colt 6920
-Midwest Industries 15" 7 M-Lok rail free float handguard
-Magpul CTR Mil-Spec stock W/LaRue Tactical RISR
-Magpul MOE grip
-Magpul MBUS front and rear sights
-Magpul Angled Foregrip
-Burris P.E.P.R. Scope mount
-Vortex Strike Eagle 1-6x24 Illuminated scope
-RRA Two Stage Match Trigger Kit
44705
44706
44707
JRA M21 DMR:
Wolfe Modified Medium Weight Barrel
NM modifications, including glass bedding, by Charles Maloney
Sadlak NM Op Rod spring guide
NM piston
SWFA SS 3-15X
not shown is the Vortex flash hider recently installed
4511145112
RobertTheTexan
04-18-17, 20:49
-Colt 6920
-Midwest Industries 15" 7 M-Lok rail free float handguard
-Magpul CTR Mil-Spec stock W/LaRue Tactical RISR
-Magpul MOE grip
-Magpul MBUS front and rear sights
-Magpul Angled Foregrip
-Burris P.E.P.R. Scope mount
-Vortex Strike Eagle 1-6x24 Illuminated scope
-RRA Two Stage Match Trigger Kit
44705
44706
44707
How's that LaRue RISR working out for you? Any issues with charging handle action when you are holding sight picture and clearing malfunction (or training) actioning the CH?
Sent from my iPhone using Tapatalk
-PSA Upper/Lower
-B5 SOPMOD
-Geissele SSA-E
-Geissele Mk4 13"
-Rainier Arms Raptor CH
-Rainier Arms Rock Creek 16" SS Barrel
-Geissele Super Precision Hyper Extended Scope Mount
-Nightforce 2.5-10x32 w/MIL-R Reticle
-Dead Air Keymount FH
-SiCo Hybrid w/Dead Air KeyMo Module
https://c1.staticflickr.com/3/2809/33330892804_4eef7b7124_h.jpg (https://flic.kr/p/SMkxcA)
https://c1.staticflickr.com/3/2906/33788473810_60a5622891_h.jpg (https://flic.kr/p/TtLL6h)
Also starting a Grendel build right now.
https://c1.staticflickr.com/3/2827/33362214363_d65d8f0d1a_h.jpg (https://flic.kr/p/SQ751t)
Switchblade666
04-21-17, 03:29
I love it. I got it because I wanted a decent cheek riser on my CTR stock, but also be able to have my stock only extended to the first position and be able to charge. I've found no issue whatsoever with it. It was stiff the first day, but loosened up perfectly as LaRue said it would. It doesn't slow down clearing a stovepipe or any other malfunction. It really doesn't get in the way at all.
http://cloud.tapatalk.com/s/58fd9a5eea969/TRIM_20170423_232330.mp4
Shot this a few months ago. IIRC was around 850 yards. 77gr tmk handloads. My friend was shooting. First time out with the new "lightweight" steel plate. I'm bummed I didn't get out again before the heat.
Bayoublaster
04-24-17, 17:54
https://c1.staticflickr.com/3/2809/33330892804_4eef7b7124_h.jpg (https://flic.kr/p/SMkxcA)
I'm jealous of that workbench.
I'm jealous of that workbench.
Only $299 at Lowe's. https://www.lowes.com/pd/Kobalt-45-in-W-x-36-in-H-3-Drawer-Wood-Work-Bench/50109238
Here's a pic of the full bench, with some more parts for my precision 6.5G build just to keep it on topic. Fluted Lilja 319 and the rest of the parts are on their way.
https://c1.staticflickr.com/3/2832/34094746352_43520ec34a_h.jpg (https://flic.kr/p/TWQufm)
grizzlyblake
04-24-17, 19:56
Knight's Armament Company (KAC) SR-25 EMC
- Knight's Armament 34mm Scope Mount
- Leupold Optics Mark 8 1.1-8x24mm CQBSS H27D
- BT10-LW17 V8 Atlas Bipod
- Magpul ACS-L Stock
- Magpul MIAD GEN 1.1 Grip
http://i640.photobucket.com/albums/uu125/986S/AA1A49F4-4BA1-4372-8BF6-3470CE8184E3_zpsiyryw69a.jpg (http://s640.photobucket.com/user/986S/media/AA1A49F4-4BA1-4372-8BF6-3470CE8184E3_zpsiyryw69a.jpg.html)
This weapon is gorgeous in its utility. Good show. Total weight?
I don't think I've posted here. Newest build. Things are only hand tight. Receivers came back yesterday and I wanted to see how it looked together.
Grabbed a gunshow Harris knock off yesterday too. We'll see how it works until I splurge on a nicer one. Want to upgrade the trigger first.
EDIT: Just posted this elsewhere and figured I'd update.
LOWER
CMT UHP15A
A2 stock, buffer, ect.
MOE grip
Forward Controls ABCr & EMR
Strike Ind. take down pins
CMMG Ambi safety
Trigger - Last thing to decide on
UPPER
CMT UPUR
CMT Mod 2 15" rail
CMT NiB BCG
Forward Controls LDFA
BCM Mod 3 CH
Weaver Tactical 2-10 Mil Dot
LaRue SPR mount
Ballistic Advantage Premium Stainless 18" SPR
CMT CRC brake
Arisaka Finger Stop
Odin gas block (not recomended)
(?)brand Harris style bipod
Rainier gas tube and other small springs, parts, ect.
KM3 Solutions LLC custom cerakote
https://c1.staticflickr.com/5/4180/34006909590_8d30b91406_b.jpg (https://flic.kr/p/TP5irq)
CMT KM3 SPR (https://flic.kr/p/TP5irq) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Got this one to where I'm done tweaking (for now). Getting ready to push it out farther, but it's consistently sub half minute @ 100 in the 168gr variety. I'm working up a video for my YT channel, going in depth and detailing the performance of a bunch of different factory match loads.
Daniel Defense DD5v2
Leupold Mk6 3-18 / Tremor2 Illuminated Reticle
Spuhr ISMS Mount
Geissele SSA-E Trigger
PRS Gen3 Stock
Atlas PSR Bipod (BT46-LW17)
http://greystatetactical.com/pics/web_02.png
Doc. Holiday
05-03-17, 07:58
Very cool. Let us know when you post your video!
New 6.5G build I finally got put together last night.
Lower:
- PSA Blem stripped lower (Cerakoted Troy Coyote Tan)
- WOA LPK
- Seekins Trigger Guard
- Geissele SSA-E
- ALG Buffer Tube
- B5 SOPMOD
- PWS H2 Buffer and JP Spring
- BAD BADASS Ambi Safety
Upper:
- Aero stripper upper (Cerakoted Troy Coyote Tan)
- Lilja 319 Fluted barrel (Cerakoted Graphite Black)
- Geissele Mk4 15" Handguard in DDC
- DD Clamp On LPGB
- Dead Air Keymount FH
- Geissele Super CH
- Bootleg Adjustable Bolt Carrier
- Maxim Firearms bolt
Accessories:
- Geissele SP 34mm SR25 Scope mount in DDC
- Vortex Razor HDII 3-18x w/ Mil reticle/adjustments
- Atlas BP on ADM QD mount
https://c1.staticflickr.com/5/4160/33612394744_b5c5fe82e2_b.jpg (https://flic.kr/p/TddiVj)
Doc. Holiday
05-04-17, 16:07
Nice rifle! Make sure to give us an update on how she groups!
Complete Sons of Liberty Gun Works (SOLGW) gun, 18" match barrel, Geissele SD-E trigger, Bushnell elite 4-16 LRTS, Deadair Sandman S.
45462
BadgerPeak
05-07-17, 21:54
Night time Recce. 16" N4 barrel has put down a lot of coyotes.
45505
Daniel Defense DDM4V11 PRO
Vortex Viper 6.5 x 20 -44mm
Burris Mount
Magpul 45 deg offset PRO BUIS
Geissele SSA-E Trigger
PRS Gen2 Stock
Harris Bipod
https://farm5.staticflickr.com/4011/35503421701_a898fca670_h.jpg (https://flic.kr/p/W6jjmn)IMG_8408 (https://flic.kr/p/W6jjmn) by hd_rolling (https://www.flickr.com/photos/22585324@N07/), on Flickr
RobertTheTexan
05-07-17, 23:08
Daniel Defense DDM4V11 PRO
Vortex Viper 6.5 x 20 -44mm
Burris Mount
Magpul 45 deg offset PRO BUIS
Geissele SSA-E Trigger
PRS Gen2 Stock
Harris Bipod
http://i718.photobucket.com/albums/ww187/hdrolling/IMG_8402_zpstibtlppk.jpg
http://i718.photobucket.com/albums/ww187/hdrolling/IMG_8372_zps3xieubcs.jpg
Somebody's little family is getting bigger and bigger! Nicely done HD.
Sent from my iPhone using Tapatalk
Fatorangecat
05-14-17, 09:08
Colt 6920 lower and lpk
Geissele SSA-E
Magpul trigger guard
BAD CASS
Norgon
Vltor A5 RE/buffer
Magpul furniture
Vltor MUR1A
Colt BCG
WOA 18" SPR barrel
SLR Sentry 7
Smith Vortex
Geissele MK 8
BCM ambi CH
Harris bipod
Arisaka Defense QDs, rail, bipod adaptor, fingerstop
Nightforce NXS 2.5-10x42 MILR
Sphur 3026
Magpul FDE Cerakote by Custom Gun Coatings
http://i611.photobucket.com/albums/tt197/fatorangecat_2009/AR3.jpg (http://s611.photobucket.com/user/fatorangecat_2009/media/AR3.jpg.html)
Noveske 20 Medium Varmint
BCM4 Upper Receiver
PRI 14" Tube
LMT A2 Lower
Geissele SSA-E
45604
SMOS Arms Builder's set with 15" rail, 18" Rainier Arms Ultramatch barrel in 223 wylde 1/8 in intermediate gas, Young Manufacturing National Match BCG, Geissele SSA-E trigger, Geissele buffer setup, Vortex Viper PST 2.5-10x32ffp in MOAhttps://uploads.tapatalk-cdn.com/20170521/e846bbb00c37fd69bd45b3f2f9c7ed9e.jpghttps://uploads.tapatalk-cdn.com/20170521/ea747c3cc580b8bfb115efa0dd940ac2.jpghttps://uploads.tapatalk-cdn.com/20170521/444472d656f42ca04209b7f9dd75c321.jpg
Sent from my SM-G900P using Tapatalk
Colt 6920 lower and lpk
Geissele SSA-E
Magpul trigger guard
BAD CASS
Norgon
Vltor A5 RE/buffer
Magpul furniture
Vltor MUR1A
Colt BCG
WOA 18" SPR barrel
SLR Sentry 7
Smith Vortex
Geissele MK 8
BCM ambi CH
Harris bipod
Arisaka Defense QDs, rail, bipod adaptor, fingerstop
Nightforce NXS 2.5-10x42 MILR
Sphur 3026
Magpul FDE Cerakote by Custom Gun Coatings
http://i611.photobucket.com/albums/tt197/fatorangecat_2009/AR3.jpg (http://s611.photobucket.com/user/fatorangecat_2009/media/AR3.jpg.html)
Nice. Is that a 13" Geissele?
https://c1.staticflickr.com/5/4283/34573729743_c71d2827bc_c.jpg (https://flic.kr/p/UFapjF)
CMT SPR (https://flic.kr/p/UFapjF) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
mattpittinger
06-26-17, 19:05
https://uploads.tapatalk-cdn.com/20170627/03d442a4d8ae0dcfd4f4b477ca4b033b.jpg
PRI MK12 Mod 0 with MK4 3.5-10 M2 turrents
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/20170627/03d442a4d8ae0dcfd4f4b477ca4b033b.jpg
PRI MK12 Mod 0 with MK4 3.5-10 M2 turrents
Sent from my iPhone using Tapatalk
Sick
Sent from my SM-G930V using Tapatalk
RobertTheTexan
06-26-17, 20:02
https://uploads.tapatalk-cdn.com/20170627/03d442a4d8ae0dcfd4f4b477ca4b033b.jpg
PRI MK12 Mod 0 with MK4 3.5-10 M2 turrents
Sent from my iPhone using Tapatalk
Matt...
That is a beaut my friend a real beaut!
Sent from my iPhone using Tapatalk
mattpittinger
06-26-17, 21:10
Matt...
That is a beaut my friend a real beaut!
Sent from my iPhone using Tapatalk
Thanks, shoots just as good as it looks
Sent from my iPad using Tapatalk
Fatorangecat
06-27-17, 13:35
Yes sir it is 13"
SilentRecon
06-27-17, 14:30
https://uploads.tapatalk-cdn.com/20170627/99922ad79897d3f49d22a68009b07aa2.jpg
Scar 17 SBR
waveslayer
06-27-17, 22:52
DT SRS 6.5x47 Lapuahttps://uploads.tapatalk-cdn.com/20170628/b16b5f1089117f325a7f6c211d994e85.jpg
my wife thinks I only have 3 guns
SilentRecon
06-29-17, 12:06
DT SRS 6.5x47 Lapuahttps://uploads.tapatalk-cdn.com/20170628/b16b5f1089117f325a7f6c211d994e85.jpg
my wife thinks I only have 3 guns
Very nice. Love that trigger on the DT platform too. Crisp
Doc. Holiday
06-29-17, 12:19
DT SRS 6.5x47 Lapuahttps://uploads.tapatalk-cdn.com/20170628/b16b5f1089117f325a7f6c211d994e85.jpg
my wife thinks I only have 3 guns
Love the DT SRS platform although this should be in the bolt action pic thread instead of the semi-auto pic thread. ;)
EHilderbrand
07-05-17, 12:58
https://farm5.staticflickr.com/4089/35695436896_4f27a662a6_b.jpg
mattpittinger
07-07-17, 14:42
https://uploads.tapatalk-cdn.com/20170707/c644935f5f7b024ecbb15a4658578ab1.jpg
Sent from my iPhone using Tapatalk
I replaced the backslash in my kitchen....... and I made some changes to my Noveske SPR. :)
Just added some MagPul Offset sights that are not pictured.
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/001084496318/media/33129296122/large/1501175576/enhance
Doc. Holiday
07-27-17, 12:43
I replaced the backslash in my kitchen....... and I made some changes to my Noveske SPR. :)
Just added some MagPul Offset sights that are not pictured.
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/001084496318/media/33129296122/large/1501175576/enhance
Nice work on the backsplash! ;-) Great looking rifle!
I replaced the backslash in my kitchen....... and I made some changes to my Noveske SPR. :)
Just added some MagPul Offset sights that are not pictured.
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/001084496318/media/33129296122/large/1501175576/enhanceYow. Very nice
Sent from my SM-G930V using Tapatalk
Nice work on the backsplash! ;-) Great looking rifle!
Thanks. I look at it as a work of art......... and I am not referring to the backslash.... :lol:
Thanks. I look at it as a work of art......... and I am not referring to the backslash.... :lol:
Beautiful bang-stick docsherm.
Can you provide build-specs (or link if you've already posted)?
Thanks.
-Rainman
Beautiful bang-stick docsherm.
Can you provide build-specs (or link if you've already posted)?
Thanks.
-Rainman
I updated the original post here with the details:
https://www.m4carbine.net/showthread.php?172464-MK-12-MOD-quot-DOC-quot
I updated the original post here with the details:
https://www.m4carbine.net/showthread.php?172464-MK-12-MOD-quot-DOC-quot
Thank you sir!
-Rainman
Thank you sir!
-Rainman
No problem. Let me know if you have any questions.
Knight's Armament Company (KAC) SR-25 EMC
- Knight's Armament 34mm Scope Mount
- Leupold Optics Mark 8 1.1-8x24mm CQBSS H27D
- BT10-LW17 V8 Atlas Bipod
- Magpul ACS-L Stock
- Magpul MIAD GEN 1.1 Grip
http://i640.photobucket.com/albums/uu125/986S/AA1A49F4-4BA1-4372-8BF6-3470CE8184E3_zpsiyryw69a.jpg (http://s640.photobucket.com/user/986S/media/AA1A49F4-4BA1-4372-8BF6-3470CE8184E3_zpsiyryw69a.jpg.html)
The second to last piece of the puzzle arrived at my dealer this past week. I ordered the 762 QDC CQB can from Silencer Shop the first week of June. They submitted my F4 paperwork and it officially went pending 7/17.
https://farm5.staticflickr.com/4298/36123270162_7eb3bebb76_o.jpg (https://flic.kr/p/X36cGN)
2002 SR-25 LWM
http://i47.photobucket.com/albums/f160/HDHNTER/SR25%20LWM_zpsget87wn0.jpg
She's getting up there in years but still shoots lights out.
5x CBC 168gr @ 100yds
http://i47.photobucket.com/albums/f160/HDHNTER/MWSnap438_zpsivolf4xs.jpg
http://i.imgur.com/nYVFAjI.jpg
http://i.imgur.com/zirGPgu.jpg
Super nice P2000.
I have the same scope on two rifles. It's my all time favorite mid range optic bar none. I use the same US Optic level and Nightforce rings/unimount too.
Super nice P2000.
I have the same scope on two rifles. It's my all time favorite mid range optic bar none. I use the same US Optic level and Nightforce rings/unimount too.Thanks. I'm happy with the set up and have lots of fun shooting at steel in the desert.
Sent from my XT1565 using Tapatalk
matthewpittinger
10-05-17, 15:37
https://uploads.tapatalk-cdn.com/20171005/f183c3f6460fc9d1650c8d06ca191f3c.jpg
Sent from my iPhone using Tapatalk
20" 6.5 Grendel
https://farm5.staticflickr.com/4480/37272137860_125ce49f0f_h.jpg (https://flic.kr/p/YMBs3y)oogf (https://flic.kr/p/YMBs3y) by hd_rolling (https://www.flickr.com/photos/22585324@N07/), on Flickr
https://farm5.staticflickr.com/4475/37272138010_559b825055_h.jpg (https://flic.kr/p/YMBs69)IMG_9037 (https://flic.kr/p/YMBs69) by hd_rolling (https://www.flickr.com/photos/22585324@N07/), on Flickr
https://farm5.staticflickr.com/4467/37272137740_446f441e01_b.jpg (https://flic.kr/p/YMBs1u)IMG_9042 (https://flic.kr/p/YMBs1u) by hd_rolling (https://www.flickr.com/photos/22585324@N07/), on Flickr
https://farm5.staticflickr.com/4464/37272137320_6c719cfc59_h.jpg (https://flic.kr/p/YMBrTf)IMG_9036 (https://flic.kr/p/YMBrTf) by hd_rolling (https://www.flickr.com/photos/22585324@N07/), on Flickr
This has been my SPR for years. And probably the most reliable rifle I've ever owned. 18" Noveske Rogue Hunter w/Geissele SSA trigger.
https://i.imgur.com/eBTdXgj.jpg?1
https://i.imgur.com/1TMbSH1.jpg?1
The-Ant1-Liberal
12-18-17, 16:16
Mk11 Mod0 wearing a muffler and a Leupold 3.5/10X a top...
https://i.imgur.com/AkEQXab.jpg
First 3 rounds using M80 Ball @ 100 yards...I have some M118LR that needs to be "tested".
https://i.imgur.com/Kx4HH0P.jpg
OrdnanceLocker
12-22-17, 20:28
49373
shooterpunk
12-27-17, 22:14
https://farm5.staticflickr.com/4728/39314282992_f77b4c6516_k.jpg (https://flic.kr/p/22U4YDo)20171227_191551 (https://flic.kr/p/22U4YDo) by Lee Jacobs (https://www.flickr.com/photos/141926019@N07/), on Flickr
I just got the 18" Odin Works barrel for Christmas. Havent shot it yet, but I'm digging the look of it.
Once I get to shoot it I’ll have better photos. But I was stoked to mount the optic today, so I snagged a quick photo.
MSR-10 Long Range 6.5CM with a Bushnell DMRII 3.5-21 sitting on a Warne Mount. Looking forward to testing out its accuracy potential.
https://uploads.tapatalk-cdn.com/20180105/f02a8c63ad99fbcccd3f87ccc6f7e338.jpg
Getting pumped ready to shoot this thing in the desert again. It has been too long.
https://i.imgur.com/Xk9Tp1C.jpg
https://i.imgur.com/QpqiU7T.jpg
Getting pumped ready to shoot this thing in the desert again. It has been too long.
Nice rifle. And very cool photos!
Nice rifle. And very cool photos!
Thanks
https://i.imgur.com/38Hc9L0.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.