Ed L.
11-10-10, 00:01
SOLD.
This is for a Noveske N4 Basic upper, bolt carrier group, charging handle, handguards.
The upper has about 2000 rounds through it, but features a hammer forged, double thick chrome lined barrel, so the round count doesn't create as much wear as it would on a standard barrel.
Before cleaning it up for sale I fired several 5 shot groups from the bench at 50 yards using an Aimpoint T1 and 55 grain factory ammo and they ranged from 1.25"-1.5."
I am selling it for $400 shipped to the lower 48 states vs. the $860 list price for a new one without shipping.
Postal money order ships immediately; personal checks held 5 business days to insure clearance.
PM me or email me
Here are the specifics:
--14.5" Cold Hammer Forged 5.56mm Barrel with Vortex Flash Suppressor, pinned to bring it to a 16" overall length, so no NFA paperwork is needed.
--Made of Mil Spec M249 Machine Gun barrel steel, with heavy M249 Chrome Lining, (appx. 2 times as thick as an M4 or M16)
--Extended Feed Ramps
--Same weight as M4 barrel, 1 lb, 9 oz, but improved contour for maximum rigidity, no M203 notch
--MP HP tested with certification
--1 in 7" twist
--Mil Spec Phosphate finish
--Carbine length gas system
--1/2x28 threads
--Fixed front sight base, F marked
--Flip-up rear sight
--Flat-top upper receiver
--Standard M4 type handguards
--Shot peened and MP tested bolt
--Auto carrier with properly staked carrier key
--Forged charging handle
Below are some pictures:
http://i102.photobucket.com/albums/m115/edagain/rightside.jpg
http://i102.photobucket.com/albums/m115/edagain/leftside.jpg
http://i102.photobucket.com/albums/m115/edagain/feedramp.jpg
http://i102.photobucket.com/albums/m115/edagain/boltboltcarrier.jpg
close-up of some scuffing:
http://i102.photobucket.com/albums/m115/edagain/rightcloseup.jpg
This is for a Noveske N4 Basic upper, bolt carrier group, charging handle, handguards.
The upper has about 2000 rounds through it, but features a hammer forged, double thick chrome lined barrel, so the round count doesn't create as much wear as it would on a standard barrel.
Before cleaning it up for sale I fired several 5 shot groups from the bench at 50 yards using an Aimpoint T1 and 55 grain factory ammo and they ranged from 1.25"-1.5."
I am selling it for $400 shipped to the lower 48 states vs. the $860 list price for a new one without shipping.
Postal money order ships immediately; personal checks held 5 business days to insure clearance.
PM me or email me
Here are the specifics:
--14.5" Cold Hammer Forged 5.56mm Barrel with Vortex Flash Suppressor, pinned to bring it to a 16" overall length, so no NFA paperwork is needed.
--Made of Mil Spec M249 Machine Gun barrel steel, with heavy M249 Chrome Lining, (appx. 2 times as thick as an M4 or M16)
--Extended Feed Ramps
--Same weight as M4 barrel, 1 lb, 9 oz, but improved contour for maximum rigidity, no M203 notch
--MP HP tested with certification
--1 in 7" twist
--Mil Spec Phosphate finish
--Carbine length gas system
--1/2x28 threads
--Fixed front sight base, F marked
--Flip-up rear sight
--Flat-top upper receiver
--Standard M4 type handguards
--Shot peened and MP tested bolt
--Auto carrier with properly staked carrier key
--Forged charging handle
Below are some pictures:
http://i102.photobucket.com/albums/m115/edagain/rightside.jpg
http://i102.photobucket.com/albums/m115/edagain/leftside.jpg
http://i102.photobucket.com/albums/m115/edagain/feedramp.jpg
http://i102.photobucket.com/albums/m115/edagain/boltboltcarrier.jpg
close-up of some scuffing:
http://i102.photobucket.com/albums/m115/edagain/rightcloseup.jpg