View Full Version : BCM BFH uppers
For those of you that have one with a free float tube what kind of accuracy (groups) are you getting at 100 yards
just a scout
11-11-10, 19:52
With good 62 gr ammo, 1/2 to 3/4 MOA.
Thanks, 1/2 to 3/4" is better than I was expecting so that is good news.
eternal24k
11-11-10, 21:25
With good 62 gr ammo, 1/2 to 3/4 MOA.
wow,
that is very good.
What are you using for ammo?
VelveteenMole
11-11-10, 22:24
wow,
that is very good.
What are you using for ammo?
And are those 3 or 5 shot groups?
jklaughrey
11-11-10, 22:32
14.5 inch with 1.5 BC, 3/4 MOA or better consistent out of 50 round cycle at 100m using TAP 75, SSA 77gr, going to try some 62/64 gr next week for groups.
VelveteenMole
11-11-10, 23:48
14.5 inch with 1.5 BC, 3/4 MOA or better consistent out of 50 round cycle at 100m using TAP 75, SSA 77gr, going to try some 62/64 gr next week for groups.
Not that I'm expecting a huge difference, but I'd be curious how much 10 shot groups would run.
Regardless, that's outstanding for a chromed barrel. Free-floated I assume?
jklaughrey
11-11-10, 23:54
Free floated DD lite 12 rail.
But sadly it is for my Dad. I built for him, he paid for parts after I convinced him to sell those Bushcrappers.
Not a very scientific test but I set up a target at 200 yards and shot with just a red dot and kept the shots within about 6" group off a bench using cheap Fiocchi 55 grain fmj's
this is a 16" BFH upper with DD Omega 9's.
Buy with confidence!
Belmont31R
11-14-10, 01:03
With good 62 gr ammo, 1/2 to 3/4 MOA.
What are those 3 round groups?
Belmont31R
11-14-10, 01:03
14.5 inch with 1.5 BC, 3/4 MOA or better consistent out of 50 round cycle at 100m using TAP 75, SSA 77gr, going to try some 62/64 gr next week for groups.
What round count on those groups?
What round count on those groups?
He posted "5 Shots" in the title of that post
Belmont31R
11-14-10, 01:34
He posted "5 Shots" in the title of that post
Oh. I still don't believe it unless cherry picking groups.
Post up some 10 shot groups shot with various types of ammo.
Robb Jensen
11-14-10, 09:18
BCM 14.5" BFH midlength with a Nightforce 12-42x scope mounted in a Bobro mount I get 5 shot groups with BH Mk262 Mod 1 in the 1/2-3/4 MOA at 100yds the biggest variable being me.
jklaughrey
11-14-10, 10:50
NF is excellent glass, and they are a short 45 minute drive from me. Need to pick up one of their scopes. Still using my Leupold Mark4 4.5x14x40
You should expect the BCM HF + FF to be sub MOA so buy with confidence. Don't let anyone convince you otherwise. You will still want to test different ammo like with any other rifle for best match.
I have a BFH upper with the Troy Vtac rail on the way from Bravo company and a Leupold mark IV 1.5 x 5 M2 and mount on the way from Larue. This will also be used as a walking around type predator rifle so I am hopeing for MOA or better with good ammo.
I have a BFH upper with the Troy Vtac rail on the way from Bravo company and a Leupold mark IV 1.5 x 5 M2 and mount on the way from Larue. This will also be used as a walking around type predator rifle so I am hopeing for MOA or better with good ammo.
That sounds realistic. I would not expect a .5 or less moa barrel.
just a scout
11-14-10, 19:27
Mine was with 62 gr. Green Tips, I think LC. Off the bench and a rest, not off hand. I wish I was that good. EOTECH XPS-2.0 with 3x mag. Avg 3 rnd group about 3/4" I'll post a pic when I go shooting again.
Mine was with 62 gr. Green Tips, I think LC. Off the bench and a rest, not off hand. I wish I was that good. EOTECH XPS-2.0 with 3x mag. Avg 3 rnd group about 3/4" I'll post a pic when I go shooting again.
Do you have an accuracy update?
just a scout
02-01-11, 05:07
Sorry, haven't been able to get to the range since.:agree:
How much of a decrease in accuracy can be expected using drop in hand guards?
How about Bravo's non forged barrels? Standard? Anyone with stories about those? Im doing a set up with a 12.5.
pb
Makintrax73
02-01-11, 16:11
How about Bravo's non forged barrels? Standard? Anyone with stories about those? Im doing a set up with a 12.5.
pb
16" mid LW - snap in guards. Seems to run about +/- 4MOA 5 shot groups from a rest with a 2MOA primary arms RDS - with generic 55fmj a la Federal bulk or PMC.
Haven't done any real serious testing with good ammo. Need to scope it to really tell, but I can't imagine it being worse than 2MOA with good ammo and a scope.
How about Bravo's non forged barrels? Standard? Anyone with stories about those? Im doing a set up with a 12.5.
pb
I have one 20" BCM with a CL barrel thats good for 2" groups @100 over 10 rounds with various weight SMK handloads and standard non-ff handguards.
With my M193 clone with Hornady 55 FMJs it's more like a 3"-3.5" gun over 20 round groups @100.
Both of these are caveated by the fact I can't shoot and better than .75" with any consistency over 10 rounds, period. I could say I had a "sub-MOA" gun if I cherry picked a 5-round group or two with either type of ammo, but in reality it's not a statistically significant result.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.