gunrunner32
01-19-11, 21:20
I've been lurking around here for a bit and this will be my first post so I hope to make it worth it. I've got several builds under my belt, most of which I've kept around.
First up:
This one was my first, it started off as a S&W M&P15OR, 16" 1:9 CL bull barrel. I added a Midwest Ind. 2 peice rail, Midwest Ind. rail height flip up front sight post, Matech adjustable range rear sight, CAA buttstock, Magpul MIAD pistol grip, YHM QD bipod adapter, 6-9" Harris Bipod, Tangodown foregrip, Surefire Milennium flashlight, EOTech 512 with GG&G flip up covers and topped it off with a Vietnam Tigerstripe Duracoat paint job.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/ARCOMPLETE3.jpg
Second:
This is my second, I didn't end up keeping this one though. It was a Bushmaster with a 1:7 CL 14.5" barrel. I pinned a Phantom flash suppressor, put on a two peice free floating GG&G modular rail, M3 flashlight with IR filter, AN/PEQ-2, ACOG TA01 with a Doctor II red dot, a Trijicon reflex, YHM flip up front sight gas block and YHM rear sight and finished in a Multi-cam pattern Duracoat.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/IMG_1034.jpg
Third:
Another that I got rid of shortly after finishing it, I realized I don't need as many AR's as I thought. This one is a bit of a mutt, it's a Sun Devil lower stuffed with DPMS parts, Delton 14.5" 1:7 CL barrel with pinned YHM flash suppressor, a free floating YHM Diamond series rail, Midwest Ind. rail height gas block, Magpul front and rear flip up sights, DPMS chrome bolt, Badger latch charging handle, Tangodown foregrip, Magpul MIAD pistol grip, a couple matching mags topped off with a Flat Dark Earth Duracoat with custom graphics.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/PACKAGE.jpg
Fourth:
I'm still uncertain about keeping this one yet but it's around. This one is also a Sun Devil lower stuffed with DPMS parts, Midwest Ind. FSP rail system, Eotech 511, Troy front and rear flip up sights, J&T 14.5" CL 1:7 barrel with pinned brownells flash suppressor, M6X laser/light combo, CAA buttstock, Magpul MIAD pistol grip, Knights Armament foregrip and finished in a Combat Black Duracoat with an Arctic Shadow POW/MIA graphic Duracoat.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/IMG_1054.jpg
Fifth:
I built this one during the Obama scare so it was a little rough going. This one is completely a mutt, a DPMS lower, a mix of DPMS TiN parts and Tuggs match springs make up the internals, Power Custom oversized mag release, YHM oversized takedown pins, Magpul MIAD pistol grip, MP5 selector lever, Arredondo mag well, LMT SOPMOD buttstock, Noveske VLTOR MUR-1A upper with Sabre Defense 1:7 CL 14.5" barrel with pinned Brownells Tactical flash hider, Daniel Defense M4 free floating rail, Adams Arms piston retrofit, RRA Chrome BCG, Had a green laser (sold that off), Had a Surefire M952 Flashlight (Sold that off), both were replaced by a Surefire X300, Grippod or a Magpul AFG pending my mood, EOTech 552 with an EOTech 4x magnifier, It's the black one by the way finished in a Satin gloss Black Duracoat.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/IMG_1033.jpg
First up:
This one was my first, it started off as a S&W M&P15OR, 16" 1:9 CL bull barrel. I added a Midwest Ind. 2 peice rail, Midwest Ind. rail height flip up front sight post, Matech adjustable range rear sight, CAA buttstock, Magpul MIAD pistol grip, YHM QD bipod adapter, 6-9" Harris Bipod, Tangodown foregrip, Surefire Milennium flashlight, EOTech 512 with GG&G flip up covers and topped it off with a Vietnam Tigerstripe Duracoat paint job.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/ARCOMPLETE3.jpg
Second:
This is my second, I didn't end up keeping this one though. It was a Bushmaster with a 1:7 CL 14.5" barrel. I pinned a Phantom flash suppressor, put on a two peice free floating GG&G modular rail, M3 flashlight with IR filter, AN/PEQ-2, ACOG TA01 with a Doctor II red dot, a Trijicon reflex, YHM flip up front sight gas block and YHM rear sight and finished in a Multi-cam pattern Duracoat.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/IMG_1034.jpg
Third:
Another that I got rid of shortly after finishing it, I realized I don't need as many AR's as I thought. This one is a bit of a mutt, it's a Sun Devil lower stuffed with DPMS parts, Delton 14.5" 1:7 CL barrel with pinned YHM flash suppressor, a free floating YHM Diamond series rail, Midwest Ind. rail height gas block, Magpul front and rear flip up sights, DPMS chrome bolt, Badger latch charging handle, Tangodown foregrip, Magpul MIAD pistol grip, a couple matching mags topped off with a Flat Dark Earth Duracoat with custom graphics.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/PACKAGE.jpg
Fourth:
I'm still uncertain about keeping this one yet but it's around. This one is also a Sun Devil lower stuffed with DPMS parts, Midwest Ind. FSP rail system, Eotech 511, Troy front and rear flip up sights, J&T 14.5" CL 1:7 barrel with pinned brownells flash suppressor, M6X laser/light combo, CAA buttstock, Magpul MIAD pistol grip, Knights Armament foregrip and finished in a Combat Black Duracoat with an Arctic Shadow POW/MIA graphic Duracoat.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/IMG_1054.jpg
Fifth:
I built this one during the Obama scare so it was a little rough going. This one is completely a mutt, a DPMS lower, a mix of DPMS TiN parts and Tuggs match springs make up the internals, Power Custom oversized mag release, YHM oversized takedown pins, Magpul MIAD pistol grip, MP5 selector lever, Arredondo mag well, LMT SOPMOD buttstock, Noveske VLTOR MUR-1A upper with Sabre Defense 1:7 CL 14.5" barrel with pinned Brownells Tactical flash hider, Daniel Defense M4 free floating rail, Adams Arms piston retrofit, RRA Chrome BCG, Had a green laser (sold that off), Had a Surefire M952 Flashlight (Sold that off), both were replaced by a Surefire X300, Grippod or a Magpul AFG pending my mood, EOTech 552 with an EOTech 4x magnifier, It's the black one by the way finished in a Satin gloss Black Duracoat.
http://i623.photobucket.com/albums/tt314/gunrunner32/Duracoat/IMG_1033.jpg