lionhart
01-23-11, 15:48
http://imagehost.vendio.com/a/11242007/aview/dbmglogo.jpg
Absolutely the best and lightest mount on the market today!
For those who followed my threads on the AK light/accessory mounts, they are available now! Through a friend I met Dennis Brush, the owner of DBMG. My intent all along was to have the best available light mount for my AK's. In the past I tried all the available mounts, and none met with my satisfaction. I passed my ideas on, and they are now a product of DBMG! Some of the details include;
*Each mount is manufactured from 7075 billet
*MIL-A-8625 Type III Class 2 hard coat anodized finish
*Works with the ULTIMAK railed gas tube
*Accepts the original cleaning rod
*Internal stainless steel alignment pins
*Ability to remove the lower handguard with mount in place
*Designed to fit the majority of AK rifles
*Weighs in at less than 4 ounces
*Made in the USA
Two sizes of mounts are available.
LH1S is the standard mount and fit's the majority of AK's with a barrel diameter no greater than .625
LH20 is an oversized mount that was designed to fit larger barrels as found on Chinese, Yugoslavian and milled rifles. This model will fit a barrel diameter no greater than .680
If your unsure what size you need, please measure the barrel, or contact me via IM.
Possibilities are endless with three rails to mount different sling attachments, lights, lasers, and even a bipod if so desired.
Limited number available.
They are available here; https://dbmg-llc.3dcartstores.com/AK-Tri-Rail_p_32.html
Thanks for looking!!
http://imagehost.vendio.com/a/11242007/aview/akmount007__600x399_.jpg
Absolutely the best and lightest mount on the market today!
For those who followed my threads on the AK light/accessory mounts, they are available now! Through a friend I met Dennis Brush, the owner of DBMG. My intent all along was to have the best available light mount for my AK's. In the past I tried all the available mounts, and none met with my satisfaction. I passed my ideas on, and they are now a product of DBMG! Some of the details include;
*Each mount is manufactured from 7075 billet
*MIL-A-8625 Type III Class 2 hard coat anodized finish
*Works with the ULTIMAK railed gas tube
*Accepts the original cleaning rod
*Internal stainless steel alignment pins
*Ability to remove the lower handguard with mount in place
*Designed to fit the majority of AK rifles
*Weighs in at less than 4 ounces
*Made in the USA
Two sizes of mounts are available.
LH1S is the standard mount and fit's the majority of AK's with a barrel diameter no greater than .625
LH20 is an oversized mount that was designed to fit larger barrels as found on Chinese, Yugoslavian and milled rifles. This model will fit a barrel diameter no greater than .680
If your unsure what size you need, please measure the barrel, or contact me via IM.
Possibilities are endless with three rails to mount different sling attachments, lights, lasers, and even a bipod if so desired.
Limited number available.
They are available here; https://dbmg-llc.3dcartstores.com/AK-Tri-Rail_p_32.html
Thanks for looking!!
http://imagehost.vendio.com/a/11242007/aview/akmount007__600x399_.jpg