PDA

View Full Version : New Product Release from Daniel Defense!



BravoCompanyUSA
08-08-06, 16:22
We are proud to announce that we made a special arrangement with Daniel Defense to make an exclusive purchase of the 10".

The 10" version is gaining significant popularity for going over a low profile gas block on a mid length gas system or carbine gas system.

These are some first pics of the Daniel Defense M4-10.0 rail. It is an amazing 11.2 oz!

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2557.jpg

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2565.jpg

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2564.jpg

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2573.jpg

Please pardon my picture taking abilities.


(The rifle pictured above is a BCM 11.5")

Thanks for looking!

molsen
08-08-06, 18:00
Nice! What are the chances of a 10" DD Lite rail coming along?

SuicideHz
08-08-06, 18:09
Nice! I noticed Troy started making 10s for this exact reason.

I'm glad to see DD doing this. I recently spoke with Jay over the phone and he's a very nice guy.

Cyclic240B
08-08-06, 18:55
Cool release, but I am still waiting on an "M4 Rail" from DD in 13.0/13.5! :)

55Kingpin
08-08-06, 19:14
Nice! What are the chances of a 10" DD Lite rail coming along?

I am also interested in the Lite rail version.

Also, I am wondering how this rail will work with a 12.5" barrel and a suppressor. I'm thinking about a Gemtech HALO, but I'm wondering about my other options with this rail and barrel combo.

ETA: I was also wondering how a 12.0 rail will work with a 12.5" barrel and a suppressor, especially which suppressors will work.

BravoCompanyUSA
08-08-06, 19:59
The LITE rail verision is on the workbench. I finished it right before I left today. I try to get some pics tomorrow and post them.

Thanks!

BravoCompanyUSA
08-08-06, 20:01
I am also interested in the Lite rail version.

Also, I am wondering how this rail will work with a 12.5" barrel and a suppressor. I'm thinking about a Gemtech HALO, but I'm wondering about my other options with this rail and barrel combo.

ETA: I was also wondering how a 12.0 rail will work with a 12.5" barrel and a suppressor, especially which suppressors will work.

Capn_Crunch or Bigbore might have some good info on the rail length doable with certain suppressors. I am just not sure.

rob_s
08-08-06, 20:10
Anyone know what the weight of the 9.5 fsp is?

M4arc
08-08-06, 20:12
You guys are killing me!

I'm still trying to scrap enough pennies together to buy a 7.0 Lite :(

CapnCrunch
08-08-06, 21:17
I'll have to measure and see exactly what will work with a 10" when I get another rail in. Giff has one of my KAC's (his now), and another is about 2 counties away on a 12". The 12" is waiting on a SF FA556K last time I heard about it.

Just judging by the pics, you'll be, at the very least, able to run an M496D/G5. KAC M4QD, or an AAC M4-2K. SCARS-D with the Phantom should work, and the FA556K should work, but I can't say for sure as I don't have either on hand. It won't work with a SF M4FA or an OPS can, for obvious reasons.

Just to add something about the rail itself... 11.2 oz??? That's going to handle like a bat outta hell, or at least until you get the "Long Dot" on top of it ;)

BravoCompanyUSA
08-08-06, 21:39
Yup, 11.2oz . . . it is like a magic trick or something.:)

I will weigh the new AR15-LITE rail tomorrow, it is just a bit heavier - but only back at the barrel nut, so my guess is the feel and balance will be very similar.

JLM
08-09-06, 01:20
MUR + 10" Rail + BCM 11.5....hellz jeah... :D

CapnCrunch
08-09-06, 01:39
Justin, you read my mind like a book! I'll toss the SB on top, and have one screaming setup.

But then again, I might just stick the 10" M4 Rail on there with an Aimpoint/LT Mount and a set of Troy BUIS.

I'm still kinda undecided at this point :)

JLM
08-09-06, 01:46
Go build it and post pics :D

Better yet, go build it, send it to me, and I'll post pics :D

Oh wait, you have nice camera's too :p

CapnCrunch
08-09-06, 01:57
Too bad my only "adequate" lens for the new rig is an uber-macro.

I'll have pics posted before this time next week ;) Of the rifle, that is, not my camera. It's be kinda hard to take pics of that, hehe.

JLM
08-09-06, 02:06
Ahh, you got the 1ds right? Well buy a 5D and you can take pics of each camera :p

BravoCompanyUSA
08-09-06, 17:50
Some pics of the AR15 LITE rail version

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2576.jpg

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2575.jpg

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2579.jpg

Sorry for the low quality pics.

VA_Dinger
08-09-06, 18:07
Very impressive to say the least.

I know what rail I'm going to be using on my next build.

Daniel Defense
08-09-06, 19:04
Looking Good Paul makes me wish I would have had an extra for myself. :)

JLM
08-10-06, 01:27
Some pics of the AR15 LITE rail version

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2576.jpg

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2575.jpg

http://img.photobucket.com/albums/v445/bravocompanyusa/100_2579.jpg

Sorry for the low quality pics.

Tally and I can take HIGH quality pics :cool:

NICE lookin stuff there bro!

J

CapnCrunch
08-10-06, 01:45
If only EOTech would make the 552 in Flat Dark Earth... I'm still not digging the softmount on the factory rig.

BTW, sweet pics of the 10.0, and expect an order from me via the web tomorrow.

9DivDoc
08-11-06, 21:17
Me likey....

Any issues with this DD rail and the MUR?....

Stickman
08-11-06, 21:59
That rail just plain rules. :D

orion
08-12-06, 06:27
ETA: I was also wondering how a 12.0 rail will work with a 12.5" barrel and a suppressor, especially which suppressors will work.

Does anyone have the (or can anyone) measure the inside circumference of the rail so we could get an idea which cans will be able to 'countersink' into it? Thanks in advance.

Robb Jensen
08-12-06, 08:20
The 10" rail does look pretty badass. :D

CapnCrunch
08-15-06, 02:40
Less than 1.25" for ID. I don't think there are any commercial cans out there that small.