PDA

View Full Version : Where to buy individual lower receiver parts?


ghostman1960
02-13-11, 05:55
Does anyone have a good source for buying individual lower receiver parts without having to buy a whole LPK? I need detents, and springs only. Any help would be much appreciated. Thanks.
Evil Bert
02-13-11, 06:07
http://dsgarms.com/Category/20_0/Lower_Receiver_Parts.aspx
Iraqgunz
02-13-11, 06:07
Since you weren't specific about what you needed, this may be the best option.

http://www.brownells.com/.aspx/pid=41458/Product/AR_15_M16_PARTS_KIT


Does anyone have a good source for buying individual lower receiver parts without having to buy a whole LPK? I need detents, and springs only. Any help would be much appreciated. Thanks.
ghostman1960
02-13-11, 06:59
http://dsgarms.com/Category/20_0/Lower_Receiver_Parts.aspx

Thank you. They had everything except for what im looking for, the spring and detent for the take down pin.
MeanRider
02-13-11, 09:57
Try M&A Parts

http://www.mapartsinc.com/products.asp?catId=75
SeriousStudent
02-13-11, 10:15
I have had very good results with the parts kits from Grant.

http://www.gandrtactical.com/cgi-bin/commerce.cgi?search=action&searchstart=0&category=GRTA

You can order the individual detents and springs. I usually order a few extra when I get a parts kit.
nimdabew
02-13-11, 10:30
Thank you. They had everything except for what im looking for, the spring and detent for the take down pin.

http://i481.photobucket.com/albums/rr173/nimdabew/Funny%20Stuff/AR_Detent_FUUUUUU.jpg

Seriously though, they may make third teir guns, but this is one of the few places I have seen that sells a complete line up. Don't get their firing pin retaining pins though. They don't fit any of my BCG's

http://www.olyarms.com/index.php?page=shop.browse&category_id=62&option=com_virtuemart&Itemid=37
ghostman1960
02-13-11, 15:14
http://i481.photobucket.com/albums/rr173/nimdabew/Funny%20Stuff/AR_Detent_FUUUUUU.jpg

Seriously though, they may make third teir guns, but this is one of the few places I have seen that sells a complete line up. Don't get their firing pin retaining pins though. They don't fit any of my BCG's

http://www.olyarms.com/index.php?page=shop.browse&category_id=62&option=com_virtuemart&Itemid=37
That was funny as hell.
Surf
02-13-11, 16:58
Thank you. They had everything except for what im looking for, the spring and detent for the take down pin.

Take down detent
http://dsgarms.com/ProductInfo/ARMEL0150.aspx

Take down spring
http://dsgarms.com/ProductInfo/ARMEL0140.aspx

Does this work for you?
ghostman1960
02-13-11, 17:36
Take down detent
http://dsgarms.com/ProductInfo/ARMEL0150.aspx

Take down spring
http://dsgarms.com/ProductInfo/ARMEL0140.aspx

Does this work for you?
Thank you!
ghostman1960
02-13-11, 17:48
Take down detent
http://dsgarms.com/ProductInfo/ARMEL0150.aspx

Take down spring
http://dsgarms.com/ProductInfo/ARMEL0140.aspx

Does this work for you?

It says for 308 AR 10 .308s. Will it work on a 5.56?
SteveL
02-13-11, 18:02
Here are the parts from G&R Tactical

Detent (http://www.gandrtactical.com/cgi-bin/commerce.cgi?preadd=action&key=GRT-DT&reference=/cgi-bin/commerce.cgi%3Fsearch%3Daction%26keywords%3Dtake down%26searchstart%3D9%26template%3DPDGCommTemplates/FullNav/SearchResult.html)

Spring (http://www.gandrtactical.com/cgi-bin/commerce.cgi?preadd=action&key=GRT-PPS&reference=/cgi-bin/commerce.cgi%3Fsearch%3Daction%26keywords%3Dtake down%26searchstart%3D9%26template%3DPDGCommTemplates/FullNav/SearchResult.html)
Hot Holster
02-13-11, 19:15
you can check here also.

http://blackrifleworks.com/lower-receiver-parts-c-22.html
Mitch
02-13-11, 22:08
Citizens Armory (http://www.thecitizensarmory.com/catalog/10)

Shipping starts at .70 for small parts, tough to beat
Surf
02-13-11, 22:41
It says for 308 AR 10 .308s. Will it work on a 5.56?Yes, they are listed for the 5.56 but say they also fit in the AR10. The takedown detent and spring are the same for both. :)
ghostman1960
02-14-11, 11:26
Thank you everyone for the leads. I just ordered enough springs, detents and pins to last a life time.
Quentin
02-14-11, 12:03
Thank you everyone for the leads. I just ordered enough springs, detents and pins to last a life time.

Unless you accidentally launch them into low orbit again! :D
MeanRider
02-15-11, 20:12
Hey nothing sucks more than to see a spring fly off in no man's land,(my wife's closet) only to be found over six months later.