APEX Ram

[Guns-up.50]

Just had my smith install the Ram(Reset assist mechanism) On my M&P9 This rather inexpensive and simple device gives my pistol a posative trigger reset. This was the main complaint for me on the M&Ps and now its tons better. This is not a product review but if your looking to get a sharp reset for your M&P check it out.

[number9xd]

I'd like to get rid of the mile long takeup on my APEX'd M&P.

...

[PPGMD]

I'd like to get rid of the mile long takeup on my APEX'd M&P.

...

Apex is working on something that might help.

[jmreagan]

Apex is working on something that might help.

Is there any word on when and what it will be? I installed my Apex hard sear and USB and it made the trigger pull smooth and crisp but........ the pre-travel is unacceptable. As of now I'm thinking I might reinstall the original hard sear and just keep the Apex USB in until something can be done about the super long pre-travel characteristics of the trigger.

The matter of the pre-travel has become more irritating to me recently because I got a .40c model to complement the .40FS with the Apex parts in I mentioned above. The c model has a stock trigger and there is very little pre-travel before the trigger breaks.

[SGB]

https://apextactical.com/store/product-info.php?pid54.html

https://apextactical.com/store/avactis-images/FSS_Kit_600_0.jpg

[toekneeg]

Still waiting for the RAM for the .45 with thumb safety :D

[vicious_cb]

**This kit is recommended for competition use only**

This kit comes complete with everything you need to upgrade your M&P to reduce pretravel, over travel and set the trigger pull to a smooth 4lbs.


Uh, no thanks.

[jmreagan]

https://apextactical.com/store/product-info.php?pid54.html

https://apextactical.com/store/avactis-images/FSS_Kit_600_0.jpg

I've seen this product and it is very interesting. But I was hoping for something to fix the long pre-travel on my existing Apex hardsear upgraded pistol without having to buy another whole trigger set.

[spamsammich]

I put a couple hundred rounds on mine today, install was a breeze. In my slow fire strings it made a huge difference in being able to prep my trigger properly. I still managed to outrun my trigger during controlled pairs though. Toward the end of my session I was starting to figure it out but my second shots were still slower than my G19 with a NY1 and - disconnector. I need more dryfire practice for sure.

[G34Shooter]

Uh, no thanks.


Then wait for the ~5 pound duty spring.

[Randy Lee]

Hi all,

The kits are being shipped with springs that bring the pull weight up into the 4.75-5 lb pull. I had the new sear springs fabricated and they arrived in time for us to include in the packages. There is also a letter from me describing what pull weights you can expect by changing out various springs.

-Randy

[cgcorrea]

I have my eye on this as well.


Still waiting for the RAM for the .45 with thumb safety :D