View Full Version : Wilson Combat +2 Mag Tube, No Sling Mount
charmcitycop
06-09-11, 23:29
........
Here are some options. I used the Scattergun one on my Remington SBS.
http://www.brownells.com/.aspx/pid=12526/Product/EXTENDED_MAGAZINE_TUBE
http://www.brownells.com/.aspx/pid=23983/Product/SHOTGUN_MAGAZINE_TUBE_EXTENSION
charmcitycop
06-10-11, 11:08
.......
I believe that the sling loop is secured with a C-type clip and can be removed. I'll look at mine later.
Thanks much for the links.
I have the scattergun LH loop +2 mag extension on my 870.
A co-worker does not want a sling loop on his mag extension, and he is anti-dremel.
Looks like he will just have to suck it up.
I believe that the sling loop is secured with a C-type clip and can be removed. I'll look at mine later.
I have two, one Wilson and one Vang Comp, the Wilson is welded and the VC is secured with a C clip.
Between work and personal, I have seen or worked on a couple hundred of the WC/SGT extensions and IG is correct. Most of them have been 1 round extensions, but I personally had a 2 round and a few of the work guns had 2 round extensions. IIRC, they were the same as the 1 round extensions. The sling mount is secured by a c clip and then a metal o ring that is pressed on. I took one apart last week because it wouldn't fit and I wanted to see if changing out the sling mount would make it work. If it matters to you, or in this case your buddy, removing the metal o ring scratched up the extension so the "fit and finish" was now all scratched up. I personally don't care, but it may matter to him.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.