munch520
06-14-11, 08:33
Kimber Ultra Carry II .45 + night sights also comes with:
2 - Wilson 47d magazines - one slimline, one regular
1 - Kimber magazine
1 - Kimber case, lock, and manual
1 - Milt Sparks Summer Special II officer holster
1 - set VZ grips ETC (slimline + magazine notch)
1 - set Kimber grips
1 - .45 cal boresnake
1 - Kimber ultra takedown tool
1 - EGW oversized firing pin stop - not fit yet
1 - Fusion chainlink alloy mainspring housing (Kimber plastic one is trash)
1 - set wolf recoil spring replacement (outer recoil spring has already been replaced, the one pictured is the old one kept for backup...the firing pin spring and inner recoil spring pictured are new)
This pistol was carried often and thus has some edgewear...aka character. The frame shows most of it, I usually touch it up quickly with alumablack but I didn't want to hide any of the wear for the purpose of these pictures. 0 rust...I repeat no rust at all. Just over 1,000 rounds (never steel) fired - eats HP and ball without a problem. Has been detail stripped/cleaned once and is field stripped after every trip to the range. As it should, sear notches are very pronounced and engage Cleaned religiously with break free powder blast/hoppes 9 and have always used gun butter lube. The holster is amazingly comfortable and fits the gun like a glove. Was broken in using the ziploc bag technique for around 5 minutes...after that the fit was the perfect amount of tightness without being difficult to draw. This is a great bug-free Kimber with some awesome goodies. $900 shipped to your FFL or trade for Kahr PM9 (black)
Pics are not doctored, Photoshoped, or otherwise screwed with. All were taken with my iPhone so quality isn't perfect but details and blemishes are very obvious.
http://i163.photobucket.com/albums/t294/myersma2/60ae6893.jpg
http://i163.photobucket.com/albums/t294/myersma2/be4af8fa.jpg
http://i163.photobucket.com/albums/t294/myersma2/1b7445db.jpg
slide was detail stripped every 500 rounds to check extractor, clean extractor tunnel, and clean/relube firing pin and spring
http://i163.photobucket.com/albums/t294/myersma2/3b959087.jpg
http://i163.photobucket.com/albums/t294/myersma2/e870d78b.jpg
http://i163.photobucket.com/albums/t294/myersma2/9b3f37f1.jpg
http://i163.photobucket.com/albums/t294/myersma2/b188a46c.jpg
http://i163.photobucket.com/albums/t294/myersma2/7d8404e6.jpg
business end - lightly oiled patch ran through barrel after every cleaning
http://i163.photobucket.com/albums/t294/myersma2/5491dcb4.jpg
carrying a .45 doesn't get much slimmer than this
http://i163.photobucket.com/albums/t294/myersma2/bd1490aa.jpg
it still shoots better than I do
http://i163.photobucket.com/albums/t294/myersma2/14db5af5.jpg
2 - Wilson 47d magazines - one slimline, one regular
1 - Kimber magazine
1 - Kimber case, lock, and manual
1 - Milt Sparks Summer Special II officer holster
1 - set VZ grips ETC (slimline + magazine notch)
1 - set Kimber grips
1 - .45 cal boresnake
1 - Kimber ultra takedown tool
1 - EGW oversized firing pin stop - not fit yet
1 - Fusion chainlink alloy mainspring housing (Kimber plastic one is trash)
1 - set wolf recoil spring replacement (outer recoil spring has already been replaced, the one pictured is the old one kept for backup...the firing pin spring and inner recoil spring pictured are new)
This pistol was carried often and thus has some edgewear...aka character. The frame shows most of it, I usually touch it up quickly with alumablack but I didn't want to hide any of the wear for the purpose of these pictures. 0 rust...I repeat no rust at all. Just over 1,000 rounds (never steel) fired - eats HP and ball without a problem. Has been detail stripped/cleaned once and is field stripped after every trip to the range. As it should, sear notches are very pronounced and engage Cleaned religiously with break free powder blast/hoppes 9 and have always used gun butter lube. The holster is amazingly comfortable and fits the gun like a glove. Was broken in using the ziploc bag technique for around 5 minutes...after that the fit was the perfect amount of tightness without being difficult to draw. This is a great bug-free Kimber with some awesome goodies. $900 shipped to your FFL or trade for Kahr PM9 (black)
Pics are not doctored, Photoshoped, or otherwise screwed with. All were taken with my iPhone so quality isn't perfect but details and blemishes are very obvious.
http://i163.photobucket.com/albums/t294/myersma2/60ae6893.jpg
http://i163.photobucket.com/albums/t294/myersma2/be4af8fa.jpg
http://i163.photobucket.com/albums/t294/myersma2/1b7445db.jpg
slide was detail stripped every 500 rounds to check extractor, clean extractor tunnel, and clean/relube firing pin and spring
http://i163.photobucket.com/albums/t294/myersma2/3b959087.jpg
http://i163.photobucket.com/albums/t294/myersma2/e870d78b.jpg
http://i163.photobucket.com/albums/t294/myersma2/9b3f37f1.jpg
http://i163.photobucket.com/albums/t294/myersma2/b188a46c.jpg
http://i163.photobucket.com/albums/t294/myersma2/7d8404e6.jpg
business end - lightly oiled patch ran through barrel after every cleaning
http://i163.photobucket.com/albums/t294/myersma2/5491dcb4.jpg
carrying a .45 doesn't get much slimmer than this
http://i163.photobucket.com/albums/t294/myersma2/bd1490aa.jpg
it still shoots better than I do
http://i163.photobucket.com/albums/t294/myersma2/14db5af5.jpg