adh
08-02-11, 20:20
This is a 2nd Gen G17
Light rail was added and basic reduction/texture was done by Boresight Solutions
This is the same Gen 2 Glock on the last page of Glock picks on the Boresight Solutions website Glock gallery
Light rail is cut for a Picatiny mount and not the universal mount of an SF X200/300/400.
You can notice in the top pic that the cross bar on the SFX300 does not seat fully on one side. I never checked to see if it was my SF that was off a bit or if it was my SF. With the crossbar removed from the X300, it sits right in the rail cut fully. I've tried to show in the pic that the rail cut placement is a bit forward of exactly where the SF would sit fully against the trigger guard when seated properly(3rd pic down). When pressed all the way against the trigger guard the SF will not fully seat on the rail (4th pic)...hope that makes sense. Regardless, this was never a problem for me and all the rounds I fired from this G17 were with my X300 attached.
SF LIGHT IS NOT INCLUDED
Other mods
TD Vickers mag release
Warren Tactical sights with a plain rear and tritium night sight front.
Factory Glock olive trigger spring with Ghost connector
I am selling only because this is my spare Boresight G17. I do not need to sell so don't even consider low balling me with an offer.
SPF
$750 delivered to your FFL from me (if your FFL requires it be received from another FL add $30 because that is what my FFL is going to charge me)
Trade interests:
Bad-ass ambi AR short throw selector
Geissele SDC trigger.....would consider an SSA
Magpul STR in foliage
MOE+ grip in Foliage
Bell and Carlson or HS Precision stock for SA Remington 700 ADL with factory sporter (i.e. standard) barrel
5.56 ball ammo (really like the hornady training ammo), 9mm (ball or Hornady training), .45acp, 7.62x39, 5.45x39, 7.62 nato ball, 30.06 ball for my Garand
KAC spare battery cover for aimpoint micro (could use up to 2 to 3 of them)
Garand web sling
Garand clips
Vltor Imod (standard/not the club foot version)
was also thinking about getting myself an XXL condor summit sofshell in coyote tan if you got one
Need to get some 8x32 binos (like he Vortex crossfire)
FSC47 or a Battlecomp AKBC
7.62x39 30rnd AK mags
5.45x39 AK-74 or tantal mags (not steel)
Buck Strider Tarani (with OD or coyote tan scales preferred)
Ruger 22/45 with the factory threaded barrel
AAC element (other quality .22 rimfire suppressor considered)
Offer anything you like, I can always say no
I'd also consider a plane jane 10.5" LMT/DD with FSB or a 14.5" DD or BCM midlength with a pinned 1.5 battle comp with FSB, or a Remington 1187 premier 12ga. ...consider it, it would have to be the right deal for me
EM or IM through the site works fine for me.
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0543.jpg
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0542.jpg
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0541.jpg
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0540.jpg
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0539.jpg
Light rail was added and basic reduction/texture was done by Boresight Solutions
This is the same Gen 2 Glock on the last page of Glock picks on the Boresight Solutions website Glock gallery
Light rail is cut for a Picatiny mount and not the universal mount of an SF X200/300/400.
You can notice in the top pic that the cross bar on the SFX300 does not seat fully on one side. I never checked to see if it was my SF that was off a bit or if it was my SF. With the crossbar removed from the X300, it sits right in the rail cut fully. I've tried to show in the pic that the rail cut placement is a bit forward of exactly where the SF would sit fully against the trigger guard when seated properly(3rd pic down). When pressed all the way against the trigger guard the SF will not fully seat on the rail (4th pic)...hope that makes sense. Regardless, this was never a problem for me and all the rounds I fired from this G17 were with my X300 attached.
SF LIGHT IS NOT INCLUDED
Other mods
TD Vickers mag release
Warren Tactical sights with a plain rear and tritium night sight front.
Factory Glock olive trigger spring with Ghost connector
I am selling only because this is my spare Boresight G17. I do not need to sell so don't even consider low balling me with an offer.
SPF
$750 delivered to your FFL from me (if your FFL requires it be received from another FL add $30 because that is what my FFL is going to charge me)
Trade interests:
Bad-ass ambi AR short throw selector
Geissele SDC trigger.....would consider an SSA
Magpul STR in foliage
MOE+ grip in Foliage
Bell and Carlson or HS Precision stock for SA Remington 700 ADL with factory sporter (i.e. standard) barrel
5.56 ball ammo (really like the hornady training ammo), 9mm (ball or Hornady training), .45acp, 7.62x39, 5.45x39, 7.62 nato ball, 30.06 ball for my Garand
KAC spare battery cover for aimpoint micro (could use up to 2 to 3 of them)
Garand web sling
Garand clips
Vltor Imod (standard/not the club foot version)
was also thinking about getting myself an XXL condor summit sofshell in coyote tan if you got one
Need to get some 8x32 binos (like he Vortex crossfire)
FSC47 or a Battlecomp AKBC
7.62x39 30rnd AK mags
5.45x39 AK-74 or tantal mags (not steel)
Buck Strider Tarani (with OD or coyote tan scales preferred)
Ruger 22/45 with the factory threaded barrel
AAC element (other quality .22 rimfire suppressor considered)
Offer anything you like, I can always say no
I'd also consider a plane jane 10.5" LMT/DD with FSB or a 14.5" DD or BCM midlength with a pinned 1.5 battle comp with FSB, or a Remington 1187 premier 12ga. ...consider it, it would have to be the right deal for me
EM or IM through the site works fine for me.
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0543.jpg
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0542.jpg
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0541.jpg
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0540.jpg
http://i226.photobucket.com/albums/dd192/adh_adh/IMG_0539.jpg