View Full Version : Can you get accuracy out of the 7.62x39 in AR platform?
Looking to do an SPR, but kinda don't want to do 5.56....
7.62x39 would be very accessible, but not sure if I can get accuracy out of that round since there is so much surplus ammo. Is there "good...accurate" ammo?
if not 6.8 or 300BLKout...
Any guidance is appreciated.
Velcro
GIGO- Garbage In Garbage Out. If the ammo isn't consistent, the rifle won't be accurate regardless of caliber. For best accuracy in this caliber, commercial ammo is probably your best bet and Lapua would be a good place to start- http://www.lapua.com/en/products/special-purpose/centerfire-rifle/19
yeah hornady makes some nice factory loads. check them out i get good results in my mini30
turdbocharged
10-11-11, 09:58
I second the Hornady loads. My pops has had nothing but trouble with his 7.62x39 AR with Wolf ammo, malfunctions ever 100 rounds or so. However with the Hornady he hasn't had a single issue so far. We were thinking that perhaps the buildup of lacquer in the chamber from the Wolf was the main cause...
He's making hits on a paper plate at 200 yards, so I'd say the accuracy is acceptable.
i get them at cabelas there usually about 30 to 35 bucks but iv gotten them for 14 bucks a box on sale befor
http://www.cabelas.com/product/Shooting/Ammunition/Rifle-Ammunition|/pc/104792580/c/104691780/sc/104532480/Hornady-762-x-39-123-gr-SST-Rifle-Ammunition-Per-50/706941.uts?destination=%2Fcatalog%2Fbrowse%2Fshooting-ammunition-rifle-ammunition%2F_%2FN-1100190%2B4294752837%2FNe-4294752837%3FWTz_l%3DSBC%253BBRprd706941%26WTz_st%3DGuidedNav%26WTz_stype%3DGNU&WTz_l=SBC%3BBRprd706941%3Bcat104532480
heres a link
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.