edwin907
08-19-06, 09:39
Here is my Recon some of might remember from another forum.
Except for the inbound OPS 12th suppressor, it's pretty much done.
http://www.pbase.com/edwin907/image/65384517/original.jpg
I installed my Vickers Combat Applications Sling and the Daniel Defense RMOQSAP (Rail Mount Offset QD Sling Attachment Point - try saying that 3 times real quick!), both from ADCO (thanks Bigbore), the LaRue Tactical BattleLight along with the GG&G swivel bipod.
If you haven't looked at the DD QD offset mount, it's really a neat little part that offsets the QD swivel a little above the rail, minimizing interference with weapon light and making the weapon hang vertically in patrol carry.
No trimming of the KAC rail cover was necessary for it to mount flush next to it.
Haven't finalized my setup with the Vickers sling yet, removed the Modular Quick Release Buckle as I usually like things as trim as I can get them but I may re-think that.
Quick rundown on the rifle: a Krieger 16" 1/7 JTAC DD 12 upper with LBC bolt carrier (shoots awesome), Troy sights, OPS brake & Collar, PRI Gasbuster, Bushmaster lower with LMT 2-stage trigger, ambi safety & mag release, and a TA11C in LT ACOG mount.
This is such an accurate flawlessly functioning rifle that's it's probably my "go to" gun now, with BH 75gr or Mk262 ammo it's much more accurate than I am with a 3.5X sight, but benched and bagged I've gotten 1/2 MOA 100 yard groups with the 75gr with multiple holes touching. As a matter of fact, I was so pleased with Jason's upper's accuracy, I haven't bothered to mount the NSX 3.5-15 and do any real testing, hitting steel at 500 yards with MK 262 and the TA11C BDC is more than satisfying enough.
Except for the inbound OPS 12th suppressor, it's pretty much done.
http://www.pbase.com/edwin907/image/65384517/original.jpg
I installed my Vickers Combat Applications Sling and the Daniel Defense RMOQSAP (Rail Mount Offset QD Sling Attachment Point - try saying that 3 times real quick!), both from ADCO (thanks Bigbore), the LaRue Tactical BattleLight along with the GG&G swivel bipod.
If you haven't looked at the DD QD offset mount, it's really a neat little part that offsets the QD swivel a little above the rail, minimizing interference with weapon light and making the weapon hang vertically in patrol carry.
No trimming of the KAC rail cover was necessary for it to mount flush next to it.
Haven't finalized my setup with the Vickers sling yet, removed the Modular Quick Release Buckle as I usually like things as trim as I can get them but I may re-think that.
Quick rundown on the rifle: a Krieger 16" 1/7 JTAC DD 12 upper with LBC bolt carrier (shoots awesome), Troy sights, OPS brake & Collar, PRI Gasbuster, Bushmaster lower with LMT 2-stage trigger, ambi safety & mag release, and a TA11C in LT ACOG mount.
This is such an accurate flawlessly functioning rifle that's it's probably my "go to" gun now, with BH 75gr or Mk262 ammo it's much more accurate than I am with a 3.5X sight, but benched and bagged I've gotten 1/2 MOA 100 yard groups with the 75gr with multiple holes touching. As a matter of fact, I was so pleased with Jason's upper's accuracy, I haven't bothered to mount the NSX 3.5-15 and do any real testing, hitting steel at 500 yards with MK 262 and the TA11C BDC is more than satisfying enough.