rob_s
12-26-11, 10:28
$800 shipped means shipped the least-expensive, but insured, method as determined by me. If you want more/faster you pay the difference. Lower MUST be shipped to your FFL but am negotiable on shipping the upper direct to you, which may also incur additional cost to you. Am NOT interested in parting this out. This means I do not wish to sell the upper and lower separately.
No trades. This means.... no trades. :nono:
This is NOT a factory gun, nor is it a T&E gun, but is a personal gun I put together from all BCM parts (except handguards & CH latch). I believe the rollmark on the lower is different than what they use now on the complete guns. The upper is from one of the first runs when BCM was "back" into producing uppers a few years ago after they had taken a couple of years off.
Comes exactly as-is from the pictures with the exception of the BCM-marked Troy rear sight which I am keeping. Didn't take it off the gun for the pictures because I *think* it's zeroed and don't want to mess with it until/if the gun sells. I didn't keep track of round counts when I put this together but it has well under 500 rounds on it but has been used several times for photo shoots for other products which is the reason for the handling wear you see in the pictures.
pictures of complete gun
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/bfa21d28.jpg
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/40c25daf.jpg
roll mark
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/902783f9.jpg
pictures of known cosmetic issues:
four holes in upper handguard
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/409a1a61.jpg
mark on barrel
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/e8028d30.jpg
paint mark(s) on upper just under rail on ejection-port side
scratches on forward assist bump-out on upper
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/a857e833.jpg
scratch on delta ring
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/b8e5a842.jpg
To assemble this from scratch you'd pay ~$950 + shipping
$400 BCM 16" STD mid-length (http://www.bravocompanyusa.com/BCM-16-Mid-Length-Upper-Receiver-Group-p/bcm-urg-mid-16.htm)
$140 BCM FA BCG (http://www.bravocompanyusa.com/BCM-Bolt-Carrier-Group-MPI-Auto-M16-p/bcm%20bolt%20carrier%20group%20auto%20mp.htm)
$23 BCM AR Charging Handle (http://www.bravocompanyusa.com/AR15-Charging-Handle-BCM-p/bcm%20charging%20handle%20ar15.htm)
$20 PRI Big Latch (http://www.bravocompanyusa.com/PRI-Big-Latch-p/pri%20latch%20big%200041.htm)
$20 Rock River Arms mid-length handguards (http://www.bravocompanyusa.com/Mid-Length-Handguards-Black-p/handguards%20mid%20length%20black.htm)
$360 BCM Complete Lower w/ stock body (http://www.bravocompanyusa.com/v/vspfiles/assets/images/bcm%20order%20form%20vltor.pdf)
No trades. This means.... no trades. :nono:
This is NOT a factory gun, nor is it a T&E gun, but is a personal gun I put together from all BCM parts (except handguards & CH latch). I believe the rollmark on the lower is different than what they use now on the complete guns. The upper is from one of the first runs when BCM was "back" into producing uppers a few years ago after they had taken a couple of years off.
Comes exactly as-is from the pictures with the exception of the BCM-marked Troy rear sight which I am keeping. Didn't take it off the gun for the pictures because I *think* it's zeroed and don't want to mess with it until/if the gun sells. I didn't keep track of round counts when I put this together but it has well under 500 rounds on it but has been used several times for photo shoots for other products which is the reason for the handling wear you see in the pictures.
pictures of complete gun
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/bfa21d28.jpg
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/40c25daf.jpg
roll mark
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/902783f9.jpg
pictures of known cosmetic issues:
four holes in upper handguard
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/409a1a61.jpg
mark on barrel
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/e8028d30.jpg
paint mark(s) on upper just under rail on ejection-port side
scratches on forward assist bump-out on upper
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/a857e833.jpg
scratch on delta ring
http://i134.photobucket.com/albums/q111/rob_s/for%20sale/b8e5a842.jpg
To assemble this from scratch you'd pay ~$950 + shipping
$400 BCM 16" STD mid-length (http://www.bravocompanyusa.com/BCM-16-Mid-Length-Upper-Receiver-Group-p/bcm-urg-mid-16.htm)
$140 BCM FA BCG (http://www.bravocompanyusa.com/BCM-Bolt-Carrier-Group-MPI-Auto-M16-p/bcm%20bolt%20carrier%20group%20auto%20mp.htm)
$23 BCM AR Charging Handle (http://www.bravocompanyusa.com/AR15-Charging-Handle-BCM-p/bcm%20charging%20handle%20ar15.htm)
$20 PRI Big Latch (http://www.bravocompanyusa.com/PRI-Big-Latch-p/pri%20latch%20big%200041.htm)
$20 Rock River Arms mid-length handguards (http://www.bravocompanyusa.com/Mid-Length-Handguards-Black-p/handguards%20mid%20length%20black.htm)
$360 BCM Complete Lower w/ stock body (http://www.bravocompanyusa.com/v/vspfiles/assets/images/bcm%20order%20form%20vltor.pdf)