I've got question regarding inter-compatibility between the sub-compact and full size Glock frames/slides. What I'd like to do is take a G29 slide/barrel/ spring/guide rod and slide it onto a G20 frame with an appropriately trimmed dust cover. Is this possible?
If the barrel lug/locking block were the same I could see it working.
Here's a start, anyhow. It's a list of glockenstein guns that you can build. Not sure if it's complete through all the models, though.
http://www.lonewolfdist.com/Products.aspx?CAT=255
Slides | Slide Conversions
Convert your standard G19, G23, or G32 pistol into a genuine long slide. All you need is our Lone Wolf dust cover, the appropriate barrel, and a matching slide.
• To build a 19L you will need a LWD-DC1, LWD-19L barrel and a G17 slide
• To build a 19XL you will need a LWD-DC1, LWD-19XL barrel and a G34 slide
• To build a 23L you will need a LWD-DC1, LWD-23L barrel and a G22 or 31 slide
• To build a 23XL you will need a LWD-DC1, LWD-23XL barrel and a G35 slide
• To build a 32L you will need a LWD-DC1, LWD-32L barrel and a G22 or 31 slide
• To build a 32XL you will need a LWD-DC1, LWD-32XL barrel and a G35 slide
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.