I bought this one back in September but it took a while to get the special license. I also grouped three rifle on the same license as the local regulations allow it, which took more time. So I only brought it home a week ago. It’s an export M16 A1 that served in Israel where it was likely modified as a Carbine.
It was sold as a former full auto transformed into semi auto. However it appears that the semi auto conversion was minimal : removal of the full auto sear, semi auto hammer and safety lever. The bolt is a full auto model. So I’m considering bringing it back to full auto at some stage. Cost was $ 1500, which is actually cheaper than most semi AR-15 A2 here.
https://uploads.tapatalk-cdn.com/202...031d8ce0db.jpg
Went straight to the 50 m indoor range
https://uploads.tapatalk-cdn.com/202...1e846c2fac.jpg
https://uploads.tapatalk-cdn.com/202...5efd5b35f5.jpg
Whereas accuracy was good (I only gave a few clicks to the front sight to raise the POI), it didn’t function well with a several failures to extract and double feeds.
So I decided to get out of my lazy ways and give it a thorough check clean and lube.
It had a strange long buffer tube and a crappy stock. I took it completely apart and inspected it, gave it a good cleaning and lubing including the gas tube which was surprisingly clean, and replaced the buffer tube and stock. I have yet to test it again.
https://uploads.tapatalk-cdn.com/202...0a60bc00ad.jpg
https://uploads.tapatalk-cdn.com/202...3edf1c3be2.jpg
https://uploads.tapatalk-cdn.com/202...e2f14ceb85.jpg
https://uploads.tapatalk-cdn.com/202...a4ceb4dc17.jpg
https://uploads.tapatalk-cdn.com/202...6dcc45341a.jpg
https://uploads.tapatalk-cdn.com/202...b032efbf26.jpg
https://uploads.tapatalk-cdn.com/202...01424525d0.jpg
https://uploads.tapatalk-cdn.com/202...6b81838605.jpg
https://uploads.tapatalk-cdn.com/202...46597218d6.jpg
https://uploads.tapatalk-cdn.com/202...265bc8e30f.jpg
https://uploads.tapatalk-cdn.com/202...bef31bce62.jpg
https://uploads.tapatalk-cdn.com/202...c59c2c975f.jpg
So it’s a bit of a mismatched mutt, lower and upper have different colours (lower black, maybe repainted, upper anodised grey), with various parts slapped on it, but I like it.
And it’ll fit well with the rest of the family
M16 A1
https://uploads.tapatalk-cdn.com/202...e945c86c73.jpg
AR-15 XM177E2
https://uploads.tapatalk-cdn.com/202...cf78b50642.jpg
M16 A2
https://uploads.tapatalk-cdn.com/202...23ddec627c.jpg
ArmaLite AR10
https://uploads.tapatalk-cdn.com/202...e2f1fc6c56.jpg
In case you missed those and have an interest :
https://www.m4carbine.net/showthread...-A1&highlight=
https://www.m4carbine.net/showthread...-E2&highlight=
https://www.m4carbine.net/showthread...-A2&highlight=
https://www.m4carbine.net/showthread...R10&highlight=