This is with all ammo.
Printable View
This is with all ammo.
I am having computer issues. I tried to upload a photo and it uploaded a work document.
Can a moderator delete this post. It has a business document that was uploaded by mistake.
So back to the issue.
All types of ammo, every 3 or 4 rounds are feeding the round forward with the nose of the bullet pointed up so it jams at an angel with base of case down and front of the case pointing up. I never thought feeding with a bottle nose round was going to be an issue
What type of feed ramp does the barrel extension have?
Here is the problem from a guy that builds DI 357 sig uppers.
One of the issues with using glock lowers is the single feed mag and the
orientation of the round during the extraction cycle. The lower lugs of
the bolt "grab" the top of the bullet in the gap between the carrier and
bolt on the ejection cycle pulling the top of the round up higher in the
mag. Sometimes you can squeeze the feed lips to hold the round tighter.
We have a process for the bcg to try and mitigate this that yours may or
may not have.
Here is the problem from a guy that builds DI 357 sig uppers.
One of the issues with using glock lowers is the single feed mag and the
orientation of the round during the extraction cycle. The lower lugs of
the bolt "grab" the top of the bullet in the gap between the carrier and
bolt on the ejection cycle pulling the top of the round up higher in the
mag. Sometimes you can squeeze the feed lips to hold the round tighter.
We have a process for the bcg to try and mitigate this that yours may or
may not have.