http://i997.photobucket.com/albums/a...IMG_0009-1.jpg
Printable View
I asked Daniel Defense if they were going to come out with 300 AAC barrels or upper assemblies and they said they have some new products coming out at the Shot Show and they can't comment at this time.
Put this one together for my wrong handed friend a while back.
https://lh3.googleusercontent.com/-y...ture.jpg?gl=US
We spent the day testing home cooked load samples, both standard and sub-sonic.
https://lh4.googleusercontent.com/-z...ture.jpg?gl=US
LMT lower, AAC 9" 300 Blackout upper w/KAC URX III rail & YHM Phantom suppressor
https://lh6.googleusercontent.com/-v...024/300BLK.jpg
https://lh3.googleusercontent.com/-s...4/300BLK-2.jpg
I'm getting ready to stencil some mags and am wondering where you guys found your stencils or did you make your own? That's about the size I wanted.
pic thread
https://lh3.googleusercontent.com/-B...2520Uppers.jpg
Billet Upper and Lower, 10.5 inch custom barrel, 14 in hand guard, 8in Rock Creek Suppressor, built by DK Enterprises .
Nice photos.
Any 300 black pistols? or will I be the first?
That mag was laser marked, not stenciled.
Maybe the first pink tip necklace?http://img.tapatalk.com/a6cd8865-b020-157b.jpg
AAC 300 blackout 9.0" upper w/ AAC 762-SDN-6 suppressor on Noveske SBR lower.
http://i5.photobucket.com/albums/y19...out/300-01.jpg
http://i5.photobucket.com/albums/y19...out/300-02.jpg
http://i5.photobucket.com/albums/y19...out/300-03.jpg
Cheers
LMT upper receiver
LMT bolt assembly
BCM Gunfighter Mod4 charging handle
Centurion 9" rail
Wilson Combat stainless 11.3" barrel
Troy low profile gas block
VLTOR flash hider
https://www.m4carbine.net/attachment...1&d=1326741658
Daniel Defense 300 BLK
http://img202.imageshack.us/img202/9205/ddblk.jpg
And a pic with a temporarily installed Mini4 to see how a Mini7 would feel and balance.
http://i1221.photobucket.com/albums/...1326753776.jpg
It feels great but not a huge difference. The numbers I've seen on the mini7 on subsonic 300blk are not that impressive. If I was mainly going to shoot supersonic I would go with the mini but I'm sure the sdn6 is going to be much quieter with the subs than the mini7. If quiet subs and close to hearing safe supers is a primary concern I say the sdn6 hands down. If length and weight are more important and you don't mind sacrificing noise reduction then mini7 is the way to go.
No for subs you want the quietest possible right? So for subs go sdn6. If you are going to shoot mostly supers and still want quiet subs and close to hearing safe supers than get sdn6. Only way I reccomend the mini7 is if you need a short compact package and are mainly shooting supers or don't care about having the quietest possible subsonic performance. I run the mini4 on my scar 10" because it is going to be loud no matter how good of a suppressor I put on it so I'd rather save length and weight, but with the subsonic option of 300blk why would you want to saccrafice sound reduction in a weapon so versatile. An 8" barrel is 2.5" shorter than 10.5" 5.56 ARs so the bigger sdn6 isn't really that big compaired to a 10.5" AR with a mini4
JasomM photo:
https://fbcdn-sphotos-a.akamaihd.net...89690788_n.jpg
Here is mine, a Palmetto State in 300 AAC Blackout.
PSA upper & lower, PSA Premium bolt/BCG. BCM Gunfighter Large charging handle, Troy ambi safety, Geissele SSA-E 2-stage trigger, PSA LPK, DPMS Double Tungsten H Buffer, Troy TRX Extreme BattleRail, Troy Lo-Pro gas block, Wilson Combat Match AR-15 Barrel 300 Blackout Recon Contour 16" 1 in 8" Twist Fluted Stainless Steel Barrel (mid-length), Vortex Crossfire Rifle Scope 30mm Tube 6-24x 50mm Adjustable Objective Mil-Dot Reticle, Burris PEPR 30mm Mount, Vltor IMOD Buttstock, ERGO Tactical Deluxe Grip. Coming via the Brown Truck, Troy trigger guard, Troy Claymore brake and MOE BAD lever.
Range test this Friday.
http://i1141.photobucket.com/albums/...m/300Blk5S.jpg
http://i1141.photobucket.com/albums/...m/300Blk1S.jpg
http://i1141.photobucket.com/albums/...m/300Blk2S.jpg
http://i1141.photobucket.com/albums/...m/300Blk3S.jpg
http://i1141.photobucket.com/albums/...m/300Blk4S.jpg
Just got this bad boy. slap on a FA lower and your in heaven. If you get the chance it will = :D.
As it sits now
9" AAC upper w/ KAC rail
LWRC lower or Colt FA lower if I want to burn money
KAC slimline sights
Aimpoint Micro T-1
Surefire RAID weapons light
ITT PVS-14 Gen3+ NV
AAC 7.62SD suppressor.
Its light, balanced and compact. not to mention a devastating round to boot! Now if I can only find some damn bulk ammo. :angry:
http://i1139.photobucket.com/albums/...ha1/photo1.jpg
my wife usually makes the guns look better than me...
http://i1139.photobucket.com/albums/...hoto1-Copy.jpg
Hey All,
I will try to get some pictures posted up on my stencil work.
What I have access to is the family sign shop. Any local or non local ;) shop can reverse cut vinyl that you can apply then paint. You would just need to provide the sign shop the length and height of the application area. The cost should not be that much depending on the amount product you get.
Brian
Mmmmmm... 8" Noveske w/VIS. Taking her to the range tonight after work. 2.5 hours can't go by fast enough!
http://i143.photobucket.com/albums/r...n/IMG_1685.jpg
http://i143.photobucket.com/albums/r...n/IMG_1688.jpg
http://i143.photobucket.com/albums/r...n/IMG_1689.jpg
Quote: I still need something indicating they're not your standard AR15 mag
I use ranger plates to id my 300 blackout mags, I use only Gi mags so some of the mags don't have the spacing that allows me to use the plates. I need to make up a jig that allows me to open up the spacing between the tabs on the bottom of the mag.