Just got this put together: 9" DCA barrel, BCM blem upper, DD Omega rail. Haven't shot it yet, hoping to take care of that next week.
http://i60.photobucket.com/albums/h2...00BLKUpper.jpg
Printable View
Just got this put together: 9" DCA barrel, BCM blem upper, DD Omega rail. Haven't shot it yet, hoping to take care of that next week.
http://i60.photobucket.com/albums/h2...00BLKUpper.jpg
Below are a few photos of the relatively low budget 300 AAC Blackout carbine I built last summer. It has a BCM upper receiver and BCG; SI Defense 16-in carbine-gas barrel with the port opened up from 0.063" to 0.110"; S&W lower I assembled; MI rifle-length rail; standard carbine buffer and action spring. It's not as high-end as the other builds posted here, but I have had a lot of fun building and tuning it. Many of the parts used to build it were spares I had on the shelf, so I put them to good use. I don't use a suppressor, so before I drilled out the gas port it would not cycle any of the three subsonic and full-power loads that I tried. It now runs all three loads without issue - all unsuppressed. I am pleased with the result for my purposes.
Attachment 11484
Attachment 11483
Attachment 11485
I finally found one... Now I just have to find ammo.
http://techno-ruby.smugmug.com/photo...-LvgXC6v-L.jpg
Jeremy
Wow that is awesome.
deleted
Here are my blackouts! Top one is a 16" CMMG and the bottom I just picked up today. Its a noveske 8" barrel tucked under a troy 11" rail and I have my suppressor attached.
I haven't shot it enough to really get it that hot. I have heard of heat transfer to the rail with the silencer tucked under it. I will update after I do more shooting with it. My above post has an error in it thought. It is a 10" noveske under an 11" Troy rail. As for taking the suppressor off, it's a thread on so I have no problems at all taking it off.
Anyone use that new Surefire mini 30 cal can? I just got my SDN-6, as it was the shortest i could find at the time. I saw SF's new one at SHOT, it looked pretty nice.
sorry did not mean to post this.
14.7" wilson combat with Leupold VX-R 1.25-4x20.
http://i34.photobucket.com/albums/d1...35539356_n.jpg
Next decision is...What suppressor to buy????
This will be my 1st. Thinking Yankee Hill Stainless Q.D. Phantom 7.62.
I can shoot it on my AR10, and my 6.8 build. Along with my future SBR 5.56 build. :D
I want one of these bad. I have a nice Mega lower, maybe find a quality 300B upper to start...
http://i673.photobucket.com/albums/v...3-31210547.jpg
BCM upper/BCG
Wilson combat barrel carbine gas
Troy alpha in 13" w/sight
Waiting on an Emod stock, bipod and 1-4 vortex
Placed on a CMMG lower.
My simple 300 Blk 16" carbine - no surpression required nor wanted.:D
16" free float CMMG Carbine upper on home built Spike lower
Magpol FCG
CAA stock ,tube, spring, carbine buffer
Magpol BUIS
Strikefire RDS
And three rounds of super 130 gr Speer HP's Home brew's BG stoppers!:D
Awesome Stick... What lower is that?
AX556
AC
Javelin, I ordered the same exact rifle. Should be shipping soon to my dealer and then start with the wait for the Form 4. Also my can is two months into the waiting game on the ATF.
All I can do now is buy ammo once a week while I'm deployed again. After this trip both items should be ready for pickup with a ton of ammo to shoot through and reload.
Let me know how it handles once you get yours.
Night hog hunter: PSA upper with YHM Diamond specter length, Selph Arms VRL-1 light, illum. Osprey 3-9x42 MDG,
Day hog hunter: CMMG w/UTG 001S, truglo multi reticle.
my new build still somewhat in progress,but able to fire.under the hood are:tks engineering billet lower,dpms lpk,magpul miad grip,magpul bad lever,daniiel defense burnsed loop receiver end plate,rainier arms mil spec carbine buffer tube,action spring,and heavy buffer,magpul pmag,noveske n4 upper and 16.1" stainless steel match grade 1 in 8 twist barrel,battlecomp babc muzzle brake,troy industries 15" alpha rails(newly released)bcm medium gunfighter charging handle,young manufacturing m16 match bolt,magpul moe stock and magul ladder rail covers and ranger plate for pmag.i plan to add a geissele automatic trigger group ,kns anti-walk pins,troy front and rear folding sights,magpul afg2 hand guard grip,and maybe a leopold scope.any thoughts or suggestions?thank you!
i was at the range getting set up to shoot. everything went black and i thought someone forgot to pay the electric bill. quiet, then the lights came back on. no one was around except for a guy wearing some oakleys and a long trench coat. odd, i thought, never saw a multicam trench coat before.
my name is Morfee Luss and i've been looking for you, he said. i have an opportunity for you to experience something new. shoot this xm193 and keep going in the same ar direction. or shoot this new round and you will see a revelation.
i took the new round and said i dont have an upper chambered in this caliber. he handed me a rifle.
http://img835.imageshack.us/img835/4090/aacup.jpg
pow! wow, this felt good. why have i never felt this before. he said, it is the first time you have really shot. welcome to the 300blk world.
http://img812.imageshack.us/img812/8223/aacfront.jpg
http://img337.imageshack.us/img337/272/aacrear.jpg
the information and shooting kept coming. exhilarated, i said, i know 300blk. he said, show me.
http://img259.imageshack.us/img259/1818/aacfull.jpg
i looked around and there was a bald headed kid sitting on a pile of brass. that must be uncomfortable i thought. he was assembling an ar from parts. thinking about some movie i vaguely remembered i asked him, where is the spoon?
http://img37.imageshack.us/img37/4682/aaclogo.jpg
he said, there is no spoon.
http://i673.photobucket.com/albums/v...4-16031620.jpg
http://i673.photobucket.com/albums/v...4-16031612.jpg
http://i673.photobucket.com/albums/v...4-16031634.jpg
CMMG complete lower W/ EMOD stock
BCM upper/BCG and Gunfighter CH
Wilson combat barrel w/LaRue Flash hider and Vltor GB
Troy Alpha w/ sight and troy rear
Viper PST 1-4 in LaRue mount
All are 300BLK URGs.
http://farm8.staticflickr.com/7052/6...d83fca09_o.jpg
Hot damn Jason, that pair of MRP CQBs is just wicked!
I didn't even know you had two CQBs. Keep living the MRP dream brother:p
All Noveske 300 blackout
http://img716.imageshack.us/img716/5750/dsc06133n.jpg