What would one look for if they decided to buy an AK? Is there a preferred manufacture / type?
Is one style more accurate or durable than another?
Do not take anything for granted. I am completely new to AKs.
Thanks, JC
Printable View
What would one look for if they decided to buy an AK? Is there a preferred manufacture / type?
Is one style more accurate or durable than another?
Do not take anything for granted. I am completely new to AKs.
Thanks, JC
Well, let's start with basics.
There are three types of AK receivers, ones made from forged and milled steel, ones that are made from sheet metal stampings, and ones that are made with heavier gauge reinforced stampings.
You'll hear terms like milled, stamped, and RPK type receivers, which correspond to the three types.
Milled receivers are correctly AK-47's, stamped receivers would be an AKM or AK-74. Reinforced stamped receivers would be known as RPK or Yugoslavian type.
All three work fine, but it's much more important with a stamped receiver that it's done "right".
Stamped receivers are much, much less expensive to manufacture. Milled receivers just scream quality and they tend to provide a more stable platform and are generally more accurate. The reinforced stamped receivers are thicker than a standard stamped receiver, and they use oversized reinforced trunnions that hold the barrel into the receiver. These are also called RPK receivers since they were developed for use with the Soviet squad auto, called the RPK.
Stamped receivers are the most versatile when it comes to playing around with different stocks. Milled receivers are a little more restricted when it comes to that.
Milled receivers can be identified by two milled out sections on either side of the receiver right above the mag well. These are just lightening cuts for the receiver, although they may help in making the receiver stiffer.
http://img.photobucket.com/albums/v6...-06/sam501.jpg
Stamped receivers, with two exceptions, should have two dimples, again, one on either side of the receiver above the mag well. They serve as magazine guides when reloading the weapon. The two exceptions are the Century Arms imported Romanian WASR-10 series, and the Russian SAIGA, although current SAIGA's might be coming in with the dimples. Stamped receivers can also be identified by the rivets that hold the front trunnion into the receiver.
http://img.photobucket.com/albums/v6...06/pmkms02.jpg
http://img.photobucket.com/albums/v6...9-13-05002.jpg
RPK receivers are what the Yugoslavians use. They are 1.5mm thick stampings rather than the traditional 1mm, and the piece that holds the barrel to the receiver, the front trunnion, is oversized and reinforced, so they are very durable, stable receivers.
http://img.photobucket.com/albums/v6...hellAK-472.jpg
http://img.photobucket.com/albums/v6...k/MVC-028S.jpg
There are three main cailibers available in AK's.....
The original caliber is the 7.62x39mm, roughly equivalent to a .30-30 WCF in power. This is a "pure" assault rifle round, with a tapered case designed to make it easy to get into and out of a chamber quickly and easily. It is also the least accurate of the cartridges available for an AK, but it's by far the most prevalent cailber.
The 5.45x39mm was introduced in 1974 with the AK-74, it was the Soviet's attempt at the lightweight rifle/caliber concept. They saw the M16 being used in Vietnam and they wanted a round that was similar. The 5.45mm has less recoil and greater accuracy than the 7.62x39mm round, and is a lot of fun to shoot. The rounds also weigh less.
AK's can now also be had in 5.56x45mm. You know all about that round, but what's important to remember with AK's in this caliber is there were never any attempts to standardize parts or magazines among AK producing countries....they were always export rifles and the Warsaw Pact fell before they were widely available. If you get a rifle in this caliber, stock up on magazines and parts specific to the rifle you have. You can find Bulgarian, Chinese and Romanian stamped 5.56mm AK's, and milled receiver Bulgarian AK's, which are being issued in Columbia and are replacing other AK's in Bulgarian service now that Bulgaria is a junior member of NATO.
You'll also hear about pre-ban, post-ban, and no-ban rifles. For AK's, the first ban was in 1989, when Bush Sr. banned import of foreign made rifles by executive order. Prior to that, the Chinese, Egyptians, Hungarians and Yugoslavians imported AK's. The Israelis and Finns imported high end rifles based on the AK action, Galils and Valmets respectively.
There were rifles imported after 1989 that had thumbhole stocks, no muzzle brakes, no bayonet lugs, etc. These were the beginning of the post ban rifles. Then in 1994, the Crime Bill came.
Post ban imports came from Romania, Bulgaria, Eqypt, China, Hungary, and Russia. These would then have to be "unbanned" to have all the evil features that most of us want.
The end of the Crime Bill allowed domestic manufacture of rifles with evil features. You'll hear terms like "parts count". Parts count refers to the # of US parts in a foreign made rifle that allow it to then have evil features. If you have 10 or fewer foreign parts in the rifle, and ATF has a specific list of what you can replace, you can have a rifle with a bayonet lug, folding stock, threaded muzzle, etc.
Without a doubt, Arsenal Inc. makes the best AK out there, hands down. I've been shooting, buying, selling and collecting AK's for almost 20 years, and these guys build an AK better than anyone. They set up operations in the US, and as subsidiaries of Arsenal Bulgaria, they sent technicians and gunsmiths over from Bulgaria and Russia to build AK's here on modern CNC machinery with the original blue prints.
As to what to buy......think about how much you want to spend.
Pre-1989 imported rifles will still bring a premium. They don't have to worry about "parts counts" and they are the least molested, so collectors will pay top dollar for them.
Otherwise.....
Top of the line milled receiver AK's can go up to and over $1200.00. Some can be had for under $800.00. Again, another plug for Arsenal Inc. There are also Chinese milled receiver rifles out there, the pre-89 Polytech Legends, and there are post ban MAK-91's that are milled. There are also two types of Bulgarian post bans that were imported before Arsenal Inc. was set up, the SA-93 and the SLR-95. They can be had for around $500 or less and can be unbanned into some really nice rifles. The Bulgarian rifles use cold hammer forged barrels, extremely high quality.
Stamped receiver rifles are much more varied. Imported stamped receivers are typically the most desired. They aren't reverse engineered. Geometry and proper heat treatment of a stamped receiver are very important. It may sound like a simple thing to make a stamped receiver, but there really aren't any US receivers that are truely "in spec"....think about all the ruckus that the term "mil-spec" brings up when discussing AR's. Foreign stamped receivers are "mil-spec".
There are some well done domestic stamped receivers.....the ones offered my DCI/NODAK are the best, with Amory USA being very good as well.
Try to avoid Hesse, Vulcan, or early Ewbanks receivers. ITM/Ohio Ordnance have been around for a while, but they would be way, way, way down on my list of domestic receivers that are still acceptable.
A quality stamped receiver rifle can be had for $700.00 or less. The better rifles are actually "kit" rifles that were built from surplus rifles cut up as parts kits and then reassembled as complete rifles on new semi auto receivers with the proper # of US parts.
You'll want to know who built these up. Atlantic Arms offers some rifles built by Vector and Red Jacket that have a good track record. Armory USA/Arsenal USA have built many great rifles, although they went through a rough spot a while back. Current SA-85B's should be decent rifles.
Again, avoid Hesse/Vulcan, and some Ohio Rapidfire builds are worse than others.
Century imported a lot of rifles from Egypt and Romania, and they are now offering Yugoslavian kit rifles built on the excellent DCI receivers.
Century is VERY much hit and miss. You'll really want to inspect the rifle before buying, looking for canted front sights, bad triggers, and just overall quality.
Bear in mind that Century tries to sell a lot of rifles for a decent price, while they bring arms to the masses, sometimes quality suffers.
The WASR-10 is the cheapest, most prevalent AK out there right now. They are imported with a receiver that can't take military magazines, but Century then opens the magazine well to accept military mags. Some are quitre serviceable and represent a good value, but many have cosmetic issues and sights that aren't alligned properly.
AK's have a bad reputation, mostly unearned, for poor accuracy. They will never be bench rest rifles, but in terms of practical accuracy, they'll hang right in there with an AR with iron sights. I'm talking about unsupported real life shooting.
What's hurt the reputation in terms of accuracy for the AK is that people tend to buy the cheapest AK they can get and stuff the cheapest ammo they can find into it, and then want to compare it to their favorite AR.
I've beat guys in practical rifle competition using my iron sighted AK against their optically sighted AR.....
I know that this is a lot of information, and I've skimmed over a lot of issues.
Ask away on specific stuff.....there's a lot of knowledge on the board here, and you might also want to check out www.akforum.net, lots of very knowledgeable AK guys there.
I'm sure I've missed alot of stuff so chime in with any info!
Wow, thanks for the very informative post. This info is worthy of its own thread, tacked for generations of newbies to come.
It looks like a Milled Arsenal Inc. AK74 is really the best option out there so far.
I wonder what took them so long to try out the Bakelite pistol grips?
So, do you have an equally impressive insight on the various AK muzzle brakes?
What decides wood or plastic (?) for the stock / handguard? Personal preference / country of origin / model / a combination of them all?
Thanks again for the detailed information!
No problem...I enjoy bringing people over to the Dark Side......:D
The Arsenal AK-74's are going to be stamped receivers.
An AK-74 is chambered in 5.45x39mm.
If you want a factory milled rifle, then you're looking at 7.62x39mm or 5.56x45mm.
Handguards and pistol grips will generally interchange, sometimes some fitting is necessary, between milled and stamped rifles.
That means you can have synthetic or wood, or a mixture of both.
When it comes to stock sets....or "furniture", it is entirely dependent on country of origin and time of issue. Wood, laminated wood, bakelite, polyamide, and polymer have all been used. All current issue new generation Kalashnikov's are being equiped with synthetic stocks.
Milled and stamped receivers use a different buttstock though.
There are generally two thread pitches for the muzzle. The traditional is a 14/1mm left hand thread, where the barrel itself is threaded. The AK-74 uses a front sight assembly that slips over the barrel itself and is threaded. Russian, Bulgarian and East German AK-74's use a 24mm right hand thread. Romanians, just to be different, use a 22mm AK-74 brake.
The rifle at the bottom of the pic is the traditional 14/1mm left hand thread. The rifle at the top has the 24mm right hand thread but has a Bulgarian flash suppressor.
http://img.photobucket.com/albums/v6...ircle10010.jpg
There are both flash suppressors and muzzle brakes, as well as just plain thread protectors available for the muzzles of AK's, it just depends on what you have.
Flash suppressor on a 5.56mm Arsenal In. SA-M5 that uses 14/1mm LH threads:
http://img.photobucket.com/albums/v6...-06/sam503.jpg
Arsenal Inc. SLR-105A1 (AK-74) with it's muzzle brake:
http://img.photobucket.com/albums/v6...R-105APlum.jpg
Arsenal Inc. SA-M7 Classic (AK-47) with a thread protector:
http://img.photobucket.com/albums/v6...8-07-05001.jpg
Egyptian Maadi with the correct AKM slant brake....the idea was to have the gas escape up and to the right to counteract the pull of the rifle up and to the left under full auto fire.
http://img.photobucket.com/albums/v6...anARMMaadi.jpg
You learn fast young padawan! :DQuote:
Originally Posted by JC_
Master Templar trains another one in the ways of Arsenal Inc :D
Wow, this is one hell of a thread for all of us who are new to the AK world.
I have a SA-M5S with the attendant pinned muzzle brake. What do I need to do do de-ban it? I'd like an AK74 style muzzle brake on there but don't want to ruin the barrel. It also has a windage adjustable rear sight that I don't care for since it sticks out to far. I may replace that with a peep rear blade.
There are threads under the brake, you can take the shark gill brake off by carefully cutting it off (dremmel). Be very careful doing this, you'll also void your warranty.
You might want to have a smith do that. You'll have to also replace the front sight block.
Chris Butler at AKUSA down in Florida has done a number of these conversions.
He's not cheap, but he's a tier one smith, and does top notch work.
K-Var sells the RPK windage adjustable sight that will fit right on your M5.
Take a look here.......
http://k-varcorp.com/forums/index.php?showtopic=3482
http://k-varcorp.com/forums/index.php?showtopic=3411
http://k-varcorp.com/forums/index.php?showtopic=3360
http://www.ak-103.com/
I think I want an AK, and that milled Arsenal looks like what I want. Who has these, and how much are they? Are they chrome-lined?
http://img.photobucket.com/albums/v6...8-07-05001.jpg
Generic, all AK's, with the exception of the Yugoslavian and the Century Arms Yugo clones, have chrome lined barrels.
That rifle is an Arsenal Inc. SA-M7 Classic. They were limited edtion rifle, built as clones of the Type 3 AK-47, which entered service around 1953.
These are going to run in the $1000.00 range, plus or minus maybe $100.00.
The alternative is the Arsenal Inc. SA-M7 Carbine, which is basically the same rifle that the US bought for the Iraqi National Guard. It differs from the Classic in that it has the lighter barrel of the AKM and a 90* gas block of the AK-74. It's an updated AK that uses a milled receiver. You should be able to find them for a little under $800.00.
http://www.arsenalinc.com/sam7carbinenb.htm
http://www.arsenalinc.com/sam7classic.htm
http://img.photobucket.com/albums/v6...ulgarianAK.jpg
We bought AK's for the ING? With all of the 1000's adn 1000's of AK's (regardless of the make and pedigree, an AK is an AK after all, and most of the time the ING turn and drop the AK while running.) we seized from Iraq in the last 4 years and buy them AK's. Is our government stupid? Oops, sorry I asked.Quote:
Originally Posted by Templar
"(regardless of the make and pedigree, an AK is an AK after all"
Don't confuse inexpensive and rugged with poorly made. You can find any number of problems reported with AKs that are made in that region with zero quality control.
M_P
Three places come to mind for quality AKs built in the US. Marc Krebs, K-Var, and Blackheart manufacturing. All start with quality components and then build to the buyers specs. some take longer than others but you should not be an a mad dash for an AK.
Whats the word on the Century Yugo M70's with underfolder stock. They seem really popular, but hows the quaility?
For the most part, they've got a decent rep. Definitely check the mag fit, as some are reported to have a loose mag well, and check to make sure the sights aren't canted.
The Green Mt. barrels that are being used in them are decent barrels, remember though that they aren't chrome lined.
I remember the 1989 chinese flood of cheap AK's that came into the country. I saw them for $100.00 each in the box off the UPS truck. Gosh what a beautiful thing.
They were hard to take apart (lots of pipe wrenching and pliers to move the levers) and the finish was rough yet they worked. What ever became of them? I am sure this is why the first executive ban went into effect. The 'powers' got scared that everyone would be able to afford a chinese AK.
How do the SA-85 Hungarian sporter rifles compare to the US manufacturers? They were really slick and beautiful phosphate finish and birch thumb stock. I read they are different in the receiver and will not accept some other AK parts?
The Yugoslavian receivers are all 1.5mm? That makes them non compatible with anyother regular 1mm stamped receiver parts?
PLease show the dark one with your light oh master.
I have to admit, finding this excellent thread has me thinking seriously about buying an AK to go with my new AR.
A couple of questions come to mind:
1) Who carries/distributes Arsenal AK's? The only ones I see listed on the Atlantic Firearms website are the SAM7 - which are sold out anyway. Does anyone else carry them? The Arsenal website seems to list everything as "Coming Soon" and "Limited Production".
2) In general, is the 1.6mm stamped receiver preferred over the 1.0mm? I know it's stiffer -- but I also know stiffer isn't always better. Sometimes the "flex" can be part of the reliability. I guess my question is: Is it worth the extra $50-$60 to get the thicker receiver? (And just from a technical standpoint, does the 1.6mm receiver actually qualify as an RPK receiver...or is that limited to the 1.5mm thickness? Just curious.)
3) I'm already seeing the wide range of prices (and quality) associated with the various models. Everything from <$300 for a Century WASR to >$1200 for an Arsenal milled AK. Yikes! I'm leaning toward something in the $500-$600 range. I've been researching both Vector Arms and Lancaster Arms - any strong opinions, one way or the other, on either of them in terms of quality?
Thanks for the great info!
Jim
Navyguy, Doug Stockman is a good dealer who's in your AO, www.ssgknives.com
He'll get in the Arsenal SLR-106FR's and also carries the Vector line of rifles.
Vectors are good to go and have a good rep for reliablity, good clean builds, and customer service. They also have some milled receiver rifles for about $800 or so.
The 1mm thick receiver is standard for every European AKM or AK-74 except the Yugoslavian rifles, which use the 1.6mm (or 1.5mm) RPK receiver. The Amory USA (Global Trades) 1.6mm receivers aren't "authentic", but I haven't heard any serious issues about them either. The Armory USA 1mm standard receiver is a decent one.
In the $500-$600 range I'd definitely look very hard at the Vectors. They have a 5 year warranty and like I said, good clean builds. If you join AKForums and order from Atlantic, tell him that you're a member there and they'll give you a discount.
Hope that helps. :cool:
For me, a new, unissued, Russian Izmesh AKM kit built with a AK74 side folder like the Uzbek guys are seen with a lot. That would be my final AK purchase possibly, it would be everything I want in a AK. I would settle for a Arsenal bulgarian built the same way if they had the time to put such a rifle on the market.
I just got a Century Yugo underfolder. It is a really clean build and I can't wait to try it out. Do the Yugo parts kits have chrome-lined barrels?
I also have a Hungarian SA-85. Who has the parts that will fit to make it into a no-ban rifle? Since I do not have the time nor the tools, who could do the job?
Thanks, Andy
Sky, as Bcm stated, original Yugoslavian rifles and the Century built clones do not have chrome lined barrels, not a serious issue unless you shoot corrosive ammo out of it.
Do you have one of the thumbhole stocked post ban SA-85 imported by KBI?
Some of those have a "short" gas system, if you could start another thread and post pics, we can help you out.
If it still has the thumbhole stock, you can get wood or synthetic military grade stocks to replace it with.
Yes it has the thumbhole. And I am trying to figure out the left hand fold options to make it beautiful
http://www.k-var.com/shop/product.ph...cat=329&page=2
http://www.k-var.com/shop/product.ph...cat=329&page=2
What is with this 'short gas system'? It it a Krinkov something or another?
How is it identified?
Agreed! I have a Kreb's rifle - built on the Russian Izhmash reciever - and it's a beauty in every way. It also comes with the side rail for mounting optics - an Aimpoint CompC3 in a modified Russian BP-02 mount shown below. Fit, finish and function are flawless - I would stake my life on this rifle without hesitation!
http://www.canonshooter.com/photos2/ak103k-3.jpg
Just like with ARs, plan to spend more $$ if you want to go with top-shelf. And just like ARs, there is a big difference if you do so!
PS - Templar, thanks for all of the info!
I left the k-var url:
http://www.k-var.com/shop/product.ph...cat=329&page=2
for viewing and I even sent the web site a request for an answer for the left side folding stock, that just so happens to be on sale right now.
I am on K-var list for contact of sale items.
I asked for a trunion to install the folding stock onto the SA-85 and had no response as this leaves me to expect that i am not celebrity enough to warrant a response.
so, where does a guy go to get some left hand stocks like the above K-var installed?
The parts are like a crap shoot. I still have a large box of wood stocks made for very small people with short arms and are useless to a north american.
Really frustrating. Got strong suggestions?:confused:
I guess an easy answer may be full of more research and calling.
You're going to have to send it off to someone specializing in AKs. They must remove the rear trunnion and make a couple cuts to get the latching mechanism and special trunnion in there. I believe they also must remove the front trunnion and put the hook that holds the stock in the folded position. There is a lot of work to add this folder and typically costs a great deal to get it done... It might almost be cheaper to get a cheap Romanian kit, pre-cut NoDak receiver and have someone build it...
Spooky
In the $500-$600 range would something like this be worthwhile?
Vector Arms AK47 Polymer Fixed Stock US $ 529.95
http://www.ssgtactical.com/vectorblackak.jpg
How would the length of pull on something like this compare to the LOP on an M4 with the stock at the first notch out?
Would there be a better option in this price range for a stamped, 7.62x39 AK? Any compatibility issues to worry about with this model vs. others in terms of changing out sights, stocks, optics, etc?
ET:
Or, would the Arsenal SLR 108 be worth waiting/splurging for? Would the barrel be threaded under that slant break?
http://arsenalinc.com/slr108/slr108550x350.jpg
You are GTG with the Vector. The SLR-108 won't be happening any time soon.
Thanks.
I thought this was rather interesting toward that end. Although I wish the extension tube was metal and not plastic.
http://www.aimsurplus.com/acatalog/mpctrcomboak.jpg
I too have reservations about the plastic attachment "tube." An alternative would be a custom wood stock for Ironwood - I'm investgating that myself.
Edit - I wish the stock on my AK was about an 1-1/2 inches shorter. The other issue with the AK stock is the way the butt plate curved for traditonal "shoulder mounting." This curve becomes somewhat painful when firing from a squared stance with the butt placed higher and more center mass. I'm not a big guy - only 5'8" - and the Sully stock on my AR works far better (and far less painful) in that way. Lighter recoil helps too, of course...
I think the only solution is a custom wood stock, something shorter and perhaps with a higher comb to accommodate optics.
For what its worth there is an all metal rear trunnion and "pig snout" for the AK that let you then use a stock AR receiver extension. So if its what you want you can put any AR stock onto an AK.
The milled version adds about 1.5" to the LOP, the stamped is ~.5"
I deal in Century, Vector, and Arsenal if you need any thing.
Pete
LOP on an AKM stock is about the same as a M16A1 stock. It's fairly short.
The Vector uses the shorter Warsaw Pact length stock of the AKM, not the K-Var extra long "NATO" length stocks.
You should be gtg.
All of my Iraqis use the m4 style stock with plastic tube. Only one has broken, and it was carried by an expat who was doing something stupid with it at the time. That said, if we had the choice I'd get them the version with the metal stock adaptor just to be safe.
The Vltor extension is great, I have 2 Krebs rifles with them. Very robust and gives me the same cheek weld as my AR's.
That was the best AK write I have seen in years you never cut any brand down just stated facts. I have the Yugo under folder from Century Arms with the DCI receiver it is well built I also had the WASR10 I hated it and sold it after 300 rounds. My first AK was the MAK 90 I think it was from the late 80's it was a good shooting AK and i think it was well built.
Keithhttp://i117.photobucket.com/albums/o...ynewt/9MM7.jpg
That's why Templar is the AK Guru.
:D