Mitutoyo Mcrometers and 0-6" Depth Mirometer Set *Pics*

These are my used but in good shape Mitutoyo Micrometers I used throughout my career as a machinist and tool maker. They come with the adjustment wrenches and the 2-3" and 3-4" inch Mic's come with the calibrating standards. The depth Micrometer has a 2.5" inch base and the hinges on the plastic case are broke. Payment would be by a USPS or bank money order or by Paypal
(you pay any fees). No further price reduction on these and no trades are needed. All three for $90. *shipped*

https://www.m4carbine.net/itrader.php?u=7422

Buy all three micrometers for $95. *shipped*

0-1" Micrometer - $25. *delivered*
2-3" Micrometer - $35. *delivered*
3-4" Micrometer - $35. *delivered*

0-6" Depth Micrometer Set - *SOLD*

https://i.imgur.com/Z55L5BHl.jpg

Still available

Still available

Still available

Still availabl

Still available

Still available

Still available

Still available

Still available

Still available

Still available

Still available

Still available

Still available

Still available

IMHO, it will not really stop many private sales, it will just drive sales underground.
All (besides NFA firearms) firearms bought even a few days before the law would take effect, could easily be sold in a two person,face to face, cash only deal after the new law is in place. As long as you didn’t sell it to an undercover cop or a wired nark using marked money or where there are cameras. If later the firearm sold was used in a crime and you get a knock on your door, it would be your word vs the buyer’s as to **when** the sale took place.

Still available

Malkoff Hound Dog 18650
Malkoff Hound Dog 18650 Neutral

This light is in excellent condition and was made with a MD-2 body with Tricap and the HD 18650 neutral (4,000k) head. It produces 900 lumens and 29,000 lux on high and 30 lumens on low running on a Li-ion 18650 cell. It can also run on a pair of CR123 lithium batteries. Makes for a pretty awesome WML on a long gun too.

Note - the light comes with the Tricap tailcap shown in the first photo. If you would prefer the straight tailcap as shown in the second photo (better for WML use), I can supply it that way.

$100.00 shipped via USPS Priority Mail (CONUS only), payment via PayPal.

Still available

Still available

Still available

Still available

Still available

Still available

Still available

Still available

BARELY HAD the massacres in El Paso and Dayton ended than the clamor began for the government to "Do Something" about weapons used in mass shootings.
Once again there were impassioned calls for "common sense" gun control, above all for more sweeping background checks before guns are purchased. "Background checks," declared Michael Bloomberg, the former New York mayor, are "the two most important words in this debate." Leading Democrats, including Senators Sherrod Brown, Chuck Schumer, and Bernie Sanders, demanded that Congress pass a law mandating a "universal" background check on all gun purchases. So did President Trump, tweeting that both parties must "come together and get strong background checks."

In reality, the overwhelming majority of gun sales already require a background check. Anyone who buys a gun from a licensed dealer — whether in person or online, in a store or at a gun show — must be cleared by the FBI before the weapon is delivered. Every year the federal government conducts more than 25 million such background checks — more than 320 million since the system was put in place. The only time the requirement doesn't apply is when someone acquires a gun locally from a private individual, such as a friend or relative. That's the so-called "gun show loophole," which has nothing to do with gun shows and isn't a loophole, since it doesn't apply to anyone in the business of selling guns.

Enacting "universal" background checks would mean forcing private citizens, people who aren't gun dealers, to go through the FBI before they can sell a gun to their next-door neighbor or their sister-in-law. That would impose a considerable burden on the personal affairs of private individuals. But would it "do something" about mass shootings?

This isn't a new question, and the answer shouldn't be in doubt. Yet somehow it remains a mystery to a lot of people, even those concerned with public affairs.

In December 2015, two terrorists carrying AR-15 rifles and semiautomatic pistols murdered 14 victims and wounded 22 others in a mass shooting at the Inland Regional Center in San Bernardino, Calif. The next day, the US Senate voted on a bill to expand the federal background gun check system to cover private sales. One of the senators vosting no was Florida's Marco Rubio.

In an interview the next morning on CBS, he explained that such a law wouldn't have prevented the latest mass shooting. Neither of the San Bernardino killers was on any database; their background checks had come up clean. When co-host Gayle King asked him about the "many other cases" where such a law could have prevented a massacre, Rubio politely replied that such cases don't exist.

In "none of the major shootings that have occurred in this country over the last few months or years that have outraged us," he said, "would [new] gun laws have prevented them."

A Washington Post staffer urged the paper's Fact Checker to scrutinize Rubio's claim, "suggesting that it was almost certainly incorrect." So the Fact Checker pored through "reams of data," examining every mass shooting since the Sandy Hook school slaughter in Newtown, Conn. Its conclusion: Rubio was exactly correct. No proposed new law could have prevented those massacres. (In two cases, the background check didn't work because of a clerical failure.)

Mass shootings are not caused because Congress hasn't passed "universal" background checks. In almost every instance, the killers buy their guns legally. "Would stronger background checks have stopped El Paso and Dayton?" asked CNN on Monday. Based on everything known so far, no.


Everyone is horrified when a gunman rampages, turning a school or club into a bloodbath. Everyone wants to "Do Something" to make it stop. But there's no easy way to end gun massacres, and universal background checks would fix nothing.
Everyone is horrified when a gunman goes on a rampage and turns a school, a church, a nightclub, or a music festival into a bloodbath. Everyone wants to "do something" to make it stop. But guns are already among the most intrusively regulated products in American life, and only a vanishingly tiny fraction of the firearms owned in the United States is ever used to commit a crime. Mass shootings themselves account for only a minuscule fraction of US homicides — and gun violence in America is much less common than it was 25 years ago.

If there were a "common sense" gun regulation that could unfailingly foil mass shootings, we would have adopted it long ago. There isn't. We are morally bound to try and prevent such carnage, but common sense — and history — say more gun control won't do it.

Why are we encouraged not to judge all Muslims by the lunatics BUT are encouraged to judge all gun owners by the very few lunatics?

Still available.​

https://us.glock.com/en/pistols?filter=gen5

Still available

https://us.glock.com/en/pistols/g19-gen5-fs-us

Still available

Still available

This is the ammo I currently *have* for sale. Prices are what they are, and no trades are needed. Cash only and *no* shipping. You can come to my place to pick it up, at : 309 E. Spring St - New Knoxville, Ohio 45871 or I can meet you 60 miles max from my location. I am only selling the 5.56/.223 ammo in cases of a 1000rds, and I am only selling the 300 Blackout AMMO in the quantities listed below, and no quantity discounts.


*5.56-.223 AMMO*
WOLF GOLD 55GR FMJ (1000rds) ---------------------------------------- $500.
FEDERAL XM193 55GR FMJ (1000rds) ---------------------------------------- $500.
PRIVI PARTIZAN 55GR FMJ ( 1000rds) --------------------------------------- $500.
PRIVI PARTIZAN 75GR FMJ HP BT (1000) -------------------------------------- $600.

*300 BLACKOUT AMMO*
SELLIER & Bellot 200GR FMJ SUBSONIC (1000rds) --------------------------- $700.
MAGTECH 123GR FMJ SUPERSONIC (1000rds) -------------------------------- $600.
BARNES 110GR TAC-TX FB (300rds) -------------------------------------------- $480.
HORNADY 190 GR SUB-X (400rds) --------------------------------------------- $500.
HORNADY FULL BOAR 110GR GMX (480rds) ----------------------------------- $650.

WTS: Three complete, *new and unused* AR upper receiver groups *Pics*





** I have three complete AR Upper Receivers for sale. They are high quality complete uppers and are *new and unused* ( More Pics are available upon request )

#1 Upper- is a complete BCM 14.5" inch, lightweight,*cold hammer forged*, mid gas barrel. BCM BCG, BCM Mod 4B Gunfighter CH (Gen 1). I removed the bayonet lug and added the Magpul MOE *Slimline* handguard and then had the FH permanently (pinned and welded) on. This upper is avaiable with or without the Magpul MBUS PRO Flip Up Rear Sight. It is priced at $775. *shipped* with the rear sight, and $685. *shipped* with no rear sight. Payment would be by a USPS or bank money order, by regular paypal (you pay the fee), or by Paypal discreet (no fee), your call. No further price reduction on this upper, and no trades are needed. Below are some links to more information on this complete *new* BCM upper receiver group.

https://www.m4carbine.net/itrader.php?u=7422

https://bravocompanyusa.com/bcm-bfh-...eceiver-group/
https://www.primaryarms.com/magpul-m...ack-mag551-blk
https://www.primaryarms.com/magpul-m...ack-mag276-blk
https://bravocompanyusa.com/bcmgunfi...-medium-latch/
https://bravocompanyusa.com/bcm-a2x-...sh-suppressor/


*****************************************************************************************************************************************************************************


#2 Upper- is a complete 5.56 Upper that I built, and consists of the following components. A Ballistic Advantage 14.5" inch, Hanson profile (26oz), 5.56 chamber, mid gas barrel, 1in7 twist rifling, with gas tube and pinned on gas block. I thermally fit the barrel to a Hodge Defense upper receiver. The Barrel nut was greased and torqued to 45ft lbs, using a Geissele reaction rod. It has a Sionics Weapon System's NP3 coated bolt carrier group, along with a BCM KMR ALPHA 13 (KeyMod) free float handguard that includes a QD Key Mod sling mount and a 3" inch Picatinny rail section. The charging handle is a BCM Gunfighter Mod 4 (Gen 1). The flash hider is a BCM A2X *Extended* that I had permanently (pinned and welded) on. It is priced at $750. *shipped*. Payment would be by a USPS or bank money order, by regular Paypal (you pay the fee), or by Paypal discreet (no fee), your call. No further price reduction on this upper, and no trades are needed. Below are some links to more information on this complete *new* AR upper receiver group.

https://www.m4carbine.net/itrader.php?u=7422

https://www.ballisticadvantage.com/1...ce-barrel.html
https://www.optactical.com/hodem4uprer.html
http://sionicsweaponsystems.com/stor...d-cam-pin.html
https://bravocompanyusa.com/bcm-kmr-...oat-handguard/
https://bravocompanyusa.com/bcmgunfi...e-sling-mount/
https://bravocompanyusa.com/bcmgunfi...-medium-latch/
https://bravocompanyusa.com/bcm-a2x-...sh-suppressor/
https://bravocompanyusa.com/bcm-keym...n-nylon-black/


****************************************************************************************************************************************************************************


#3 Upper - is a complete 5.56 Upper that I built, and it consists of the following components. An excellent Lothar Walther 16" inch match grade barrel, with a Life HD Melonite QPQ Treated finish, Lothar Walther's proprietary LW50 stainless barrel steel, medium profile barrel (29 oz), Wylde Chamber (shoot .223 or 5.56), 1in8 Twist Rate Polygon rifling, Mid Gas barrel with the gas tube and pinned on gas block. I thermally fit the barrel to a Hodge Defense upper receiver. The barrel nut was greased and torqued to 45ft lbs, using a Geissele reaction rod. It has a BCM bolt carrier group, along with a BCM MCMR-13" (M-LOK) handguard that includes a QD M-LOK sling mount and 3" inch M-LOK picatinny rail section. The charging handle is a Radian *Raptor*, and the flash hider is a standard A2. It also has a Forward Controls low drag forward assist installed. It is priced at $870. *shipped*. Payment would be by a USPS or bank money order, by regular Paypal (you pay the fee), or by Paypal discreet (no fee), your call. No further price reduction on this upper, and no trades are needed. Below are some links to more information on this complete *new* AR upper receiver group.

https://www.m4carbine.net/itrader.php?u=7422

https://www.lothar-walther.com/1412/...nef-2a-l-16.00
https://www.optactical.com/hodem4uprer.html
https://bravocompanyusa.com/bcm-mcmr...-modular-rail/
https://bravocompanyusa.com/bcm-bolt...roup-mpi-auto/
https://www.primaryarms.com/radian-w...g-handle-black
https://www.forwardcontrolsdesign.co...sist_p_16.html
https://bravocompanyusa.com/bcm-mcmr...ack-five-pack/
https://bravocompanyusa.com/bcmgunfi...ok-compatible/
https://bravocompanyusa.com/bcm-3-in...ok-compatible/


*****************************************************************************************************************************************************************************

https://i.imgur.com/aNYHHEvl.jpg
https://i.imgur.com/jSd9QyLl.jpg
https://i.imgur.com/zj3AexDl.jpg
https://i.imgur.com/EKHjRGnl.jpg
https://i.imgur.com/bPhBafvl.jpg
https://i.imgur.com/RPMq2gDl.jpg
https://i.imgur.com/2eu10c9l.jpg
https://i.imgur.com/bs0q55zl.jpg
https://i.imgur.com/as5Al11l.jpg
https://i.imgur.com/NBQWUq8l.jpg
https://i.imgur.com/rljop5Ll.jpg
https://i.imgur.com/CH4iZcbl.jpg
https://i.imgur.com/AR7sUnvl.jpg
https://i.imgur.com/zwWVktXl.jpg
https://i.imgur.com/WIiSwxkl.jpg
https://i.imgur.com/e0WtOvCl.jpg