Tips for 200yrd spinner

Printable View

10-19-21, 12:52
1986s4

Tips for 200yrd spinner

Other than making sure my 50/200 zero is spot on at 200 what other tips do you have for this challenge? I've watched youtube vids on spinners, I've never shot at one. I'm using a 5.56 with 14.5" barrel and Federal XM193F 55 grain ammo.

Thanks
10-20-21, 09:58
Matt in TN

Rifle spinners are tough at 100 yds, much less 200. Using 55gr ammo makes it even harder still.

Remember there will be a time lag between when you pull the trigger and when the bullet hits the target. Pull the trigger right when the spinner changes directions and just STARTS to swing backwards - don't wait until halfway through the swing or it will hit too late.

And bring plenty of ammo. Good luck!
10-20-21, 15:32
1986s4

Quote:

Originally Posted by Matt in TN

Rifle spinners are tough at 100 yds, much less 200. Using 55gr ammo makes it even harder still.

Remember there will be a time lag between when you pull the trigger and when the bullet hits the target. Pull the trigger right when the spinner changes directions and just STARTS to swing backwards - don't wait until halfway through the swing or it will hit too late.

And bring plenty of ammo. Good luck!

Thanks man ! I just got back from assuring my 200yd zero on a 8" steel plate. It went well as long as I do my part...... This will be challenging.
10-22-21, 15:49
Matt in TN

Let us know how it goes!
10-24-21, 12:31
1986s4

Quote:

Originally Posted by Matt in TN

Let us know how it goes!

It won't be for another month but will do. I was using a 2 moa aimpoint RD with 3x magnifier. Now upgraded to a 4x magnifier. Now back to the 200m/220yd range with some 8" plates for practice which will have to do since a spinner is not available.
10-25-21, 11:03
B Cart

I've shot many spinners in PRS matches, but always with precision bolt guns. Making hits with a precision bolt gun is much easier, as most precision rifles are shooting 1" groups at 200 yards. The trick is timing the shot based on the spin of the spinner plates, so I generally shoot as the largest bottom spinner plate is coming down, NOT when the plate is already at the bottom. Your shot time delay will depend on distance to target, and how fast the spinner is spinning, and with some practice, you will start to see when you need to brake your shot. Also, it's generally better to shoot the bigger bottom target, as it's heaver with more momentum, and you will usually get the spinner all the way around quicker.

I would assume 200 yards with a 14.5" AR with M193 would be tough, as most ARs are shooting 2-4 MOA with M193 ammo, vs .5 MOA with a precision gun. Also, a 55 gr .223 bullet is not going to move the spinner like a bigger 6mm, 6.5, or .30 cal bullet will, so it may take more hits. That being said, it's probably very possible to do with an AR, but will take some actual practice on a spinner. Hope that helps a little
10-26-21, 08:05
1986s4

Quote:

Originally Posted by B Cart

I've shot many spinners in PRS matches, but always with precision bolt guns. Making hits with a precision bolt gun is much easier, as most precision rifles are shooting 1" groups at 200 yards. The trick is timing the shot based on the spin of the spinner plates, so I generally shoot as the largest bottom spinner plate is coming down, NOT when the plate is already at the bottom. Your shot time delay will depend on distance to target, and how fast the spinner is spinning, and with some practice, you will start to see when you need to brake your shot. Also, it's generally better to shoot the bigger bottom target, as it's heaver with more momentum, and you will usually get the spinner all the way around quicker.

I would assume 200 yards with a 14.5" AR with M193 would be tough, as most ARs are shooting 2-4 MOA with M193 ammo, vs .5 MOA with a precision gun. Also, a 55 gr .223 bullet is not going to move the spinner like a bigger 6mm, 6.5, or .30 cal bullet will, so it may take more hits. That being said, it's probably very possible to do with an AR, but will take some actual practice on a spinner. Hope that helps a little

Thanks, that does help and thanks also for refraining from telling me to get a different rifle, cartridge and optic. So you focus on shooting the bottom only? Do you ever target the upper plate?
10-26-21, 08:05
1986s4

Quote:

Originally Posted by B Cart

I've shot many spinners in PRS matches, but always with precision bolt guns. Making hits with a precision bolt gun is much easier, as most precision rifles are shooting 1" groups at 200 yards. The trick is timing the shot based on the spin of the spinner plates, so I generally shoot as the largest bottom spinner plate is coming down, NOT when the plate is already at the bottom. Your shot time delay will depend on distance to target, and how fast the spinner is spinning, and with some practice, you will start to see when you need to brake your shot. Also, it's generally better to shoot the bigger bottom target, as it's heaver with more momentum, and you will usually get the spinner all the way around quicker.

I would assume 200 yards with a 14.5" AR with M193 would be tough, as most ARs are shooting 2-4 MOA with M193 ammo, vs .5 MOA with a precision gun. Also, a 55 gr .223 bullet is not going to move the spinner like a bigger 6mm, 6.5, or .30 cal bullet will, so it may take more hits. That being said, it's probably very possible to do with an AR, but will take some actual practice on a spinner. Hope that helps a little

Thanks, that does help and thanks also for refraining from telling me to get a different rifle, cartridge and optic. So you focus on shooting the bottom only? Do you ever target the upper plate?
10-26-21, 11:43
B Cart

Quote:

Originally Posted by 1986s4

Thanks, that does help and thanks also for refraining from telling me to get a different rifle, cartridge and optic. So you focus on shooting the bottom only? Do you ever target the upper plate?

Shooting bottom only is probably the easiest way to spin it for most people, however, if you are fast enough and accurate enough, you can shoot bottom then top and keep rotating, as long as you don't wait too long between shots, to keep the momentum going. Spinners are really fun and a great way to practice accuracy and speed. Let us know how you do with the 5.56 when you get a chance to shoot it!
10-26-21, 11:56
1986s4

Quote:

Originally Posted by B Cart

Shooting bottom only is probably the easiest way to spin it for most people, however, if you are fast enough and accurate enough, you can shoot bottom then top and keep rotating, as long as you don't wait too long between shots, to keep the momentum going. Spinners are really fun and a great way to practice accuracy and speed. Let us know how you do with the 5.56 when you get a chance to shoot it!

Will do, it should be fun and I am really looking forward to it. I am thinking that a good strategy for me is to shoot the top plate while still, since it is the smallest, then focus on the bottom, once it's swinging, because of it's larger size.
11-25-21, 08:54
1986s4

My report: The stage was tough, it combined a 200yd rifle spinner with a 100 yd rifle spinner and once those were done then one ran up and spun the second spinner with the pistol, I timed out before firing the pistol. The rising sun was tough and I lost my sight picture after every shot. It could have been done, just not by me that morning....
09-13-22, 07:49
1986s4

OK, just under a year later and I am going back for more this coming November. I'm sure there will be a spinner or two, they seem to be a staple for these matches. I have had zero practice with a spinner and this time I will be shooting the iron sights division. But, the range will not be over 200m, limitations of the range. With me luck.
09-13-22, 09:54
1168

Good luck, let us know how it goes.