Printable View
Hi all,
I just received my Elcan SpecterDr 1-4 and mounted it on my .223/5/56 AR with a 16" barrel. I know that they recommend sighting it in at 4x power and 100 meters. I've typically zeroed at 100 yards, but been thinking about the 50/200 yard zero as it seems to make a lot of sense to me. Is anyone with an Elcan effectively using a 50/200 yard zero and how does that impact the Elcan's BDC?
Thanks
Steve
I don't have one, but sounds like you would get some use from loading Strelok and a ballistic calculator to help come up with a plan.
https://i.imgur.com/MGVLqTA.jpg
Just a rough estimate but you'd be holding a bit low for all distances. a 50/200 is more useful if you are going off holdovers without a reticle that has them .
That makes complete sense Torque. Thanks!
The Strelok suggestion was also appreciated JSB!
That looks like a fighting not precision reticle to me. Past 600 you are just trying to put lead downrange near the target. If I used it at a range with targets at known distances I would use the recommended 100 yd zero. If in the field with no way to range targets I would use the 50-200. I would rather be able to shoot inside of 250 without thinking and use Kentucky windage at distant targets at unknown ranges. I would rather spray and pray at distant targets than close targets. Depends on what you want to do with the rifle.
CB, with your 50/200 zero what are your holds in comparison to the BDC typically?
If I’m shooting m855 it’s pretty much dead on. That’s using a 16” DD barrel.Quote:
Originally Posted by PaseMkr
Sent from my iPhone using Tapatalk
Good to know! I guess I will just have to play around once the winter weather breaks. Thanks!Quote:
Originally Posted by cb805