Lessons Learned from annual Milsurp Maintenance
I’m wrapping up my annual milsurp / blued gun maintenance and made some observations.
1. Conservation works
2. Hoppes #9 is vastly under rated
3. Tear them down completely
I tore a few of them down further than I normally do and found some surface rust forming on small parts.
Mostly on my Model 94, 1917 Enfield and ‘43 IBM Carbine.
Took a page from the Mark Novak book and tried conserving the rusted parts (Boiling for 30 minutes) and they turned out perfectly.
Both parts of the model 94 looked like this prior to conservation. Had a similar experience with my Enfield that was made in 1918.
https://uploads.tapatalk-cdn.com/202...d2208b8f82.jpg
Both turned out great after boiling, a kerosene dip and rub down with 0000 steel wool.
https://uploads.tapatalk-cdn.com/202...084ec4ab21.jpg
Hoppes #9 doesn’t get nearly enough love as a carbon destroyer and has a new level of respect.
Tear those old guns apart and do a thorough inspection. You never know what you may find.
Lessons Learned from annual Milsurp Maintenance
Quote:
Originally Posted by
opngrnd
Excellent post. I'll have to read that book, I've never tried that method before.
Thank-you, but not a book. The Mark Novak conservation series on YouTube. His channel name is “Anvil.”
I’ve also used his technique to repair buggered screws with a mirror polished hammer and it works great.
I don’t have a before shot, but this ‘43 AFH Garand bayonet screw was majorly buggered prior to my repair.
https://uploads.tapatalk-cdn.com/202...78bdc7c263.jpg
https://uploads.tapatalk-cdn.com/202...af08360313.jpg
It ain’t perfect, but it’s a night and day improvement from where it started.
Lessons Learned from annual Milsurp Maintenance
Quote:
Originally Posted by
AndyLate
I have never tried boiling , thats a great idea.
You are 100% correct, have to break the guns down too.
Bronze wool is your friend as well
https://www.brownells.com/gunsmith-t...-prod7391.aspx. With oil, of course.
I have used a pre-1982 penny with oil to remove "chunky" rust, but I will definitely try boiling first now.
An enthusiastic wipe down with oil and a paper towel seems to clean a fair bit of hidden corrosion from blued barrels, etc (paper is often tinged red after). I like to think that it reduces the opportunity for rust to start on guns I don't shoot much.
Andy
The best part of boiling is that it doesn’t harm the finish, it just converts the rust.
He also says to soak the 0000 steel wool in acetone before using it to take the rust off. (Steel wool has oils in it apparently)
Oiling is the very last step in the process and he recommends used motor oil or some other oil without detergents as the first oiling.
If you are going to try it, please watch his videos. I wouldn’t want to be responsible for ruining something because I left a step out on here.
He covers it in several videos, this is a good one.
https://youtu.be/rShG_F85W1Y