Printable View
I received my form 1 back in October for my SBS so I figured today was the day for the hacksaw and drill.
It turned out fairly nice and I’m happy with it.
I need a recommendation for what sling mount for it. I want to keep it old school since it has a wood stock and forearm. I’m kinda reluctant to drill the stock for a sling mount. Any ideas?
Here are some pics.
https://imgur.com/gallery/eWitrQQ
For the front mount on the mag tube I have used two different options.
One: is a Mesa tactical clamp with QD hole that wedges around the mag tube extension and barrel. QD insert on one side and you can put a pic rail on the other for a light. I use it on a 18" 870. Not sure if your barrel will have enough room left to make this mount work, and you’ll need to add a mag extension. One thing to watch out for is to not clamp it on too tight. I actually ovalled the mag tube on my Benelli SBS with one and could not get rounds in the magazine past the clamp. Took it off and mag tube straightened back out.
Attachment 59694
The other type of mount I use on my Benelli SBS is a GG&G QD ring that fits between the barrel lug ring and mag tube cap. It works well and has been solid for me.
Attachment 59693
As far as the stock mount. All I've ever used and seen is a screw in sling swivel stud. I'd just brake down and drill and screw in a stud. It will not compromise the "old school" look you are wanting to keep IMO. If you ask me, if you try any other way to attach the sling to the stock it will look and feel awkward.
I use a BFG buttstock adapter on my 870
https://www.blueforcegear.com/a2-buttstock-adapter.html
and Nordic Components clamp with QD up front.
https://nordiccomp.com/product-categ...p-accessories/
Just not enough barrel length for the clamp style mount.
I like the look of the sling stud mounted in the end of the mag tube and will reluctantly break out the drill for the stock. I hate to drill the wood but I think it’s the old school look that I’m looking for and pair it with a leather sling. Nothing else has stood out for me.
I was thinking no sling to keep it simple but I’m a believer that all HD guns must have a sling.
Just in case you mess up when drilling it you can buy a new stock.
https://www.midwestgunworks.com/page/mgwi/prod/f93959
Or maybe you could find a wood stock with the stud already in place.
https://i.imgur.com/Po52h6F.jpg
I guess I’m finished
For the rear mount I use one of the GG&G mounts that goes between the stock and receiver works good and I can run a singlepoint sling if I want or a 2or 3 point one as well
I use the Magpul 870 stock on my SBS, and the single point adaptor with a Magpul MS2 sling. I'm not a huge fan of single point slings, but for my short 870 its pretty nice.
Those always get in the way of my grip.Quote:
Originally Posted by Mr. Greene
Not too bad, but still noticeable when the sling is not attached. But when the sling is attached, impossible. It’s either all around my trigger finger or my thumb depending on which side I have it on.