Midwest Industries Ruger PC Products

The Ruger PC9 will now be more customizable than ever with the upgrades we have been working on.

The Midwest Industries PC9 Combat Rail (MI-CRPC9) is a light weight, slim profile upgrade that installs with ease with the provided mounting bolt and 5/32 allen wrench.

The handguard is 12” in length and features 8 sides of M-LOK slots. It has a total of three built in QD sling points with one on each side and a third on the bottom to allow for a more traditional way of rifle carry.

The 12” handguard has a thin outside diameter of 1.5” and weighs only 10.9 oz

With a 6061-aluminum construction and type 3 hard coat anodized finish this handguard will last a lifetime and has the warranty to back that up.

A five-slot polymer M-LOK rail is included.

This handguard has a patent pending.

With the addition of the handguard's front QD sockets comes the need for a place to sling up in the rear of the stock. With this need comes our stock plate (MI-PC9QDSP).

This plate is super easy to install with the factory hardware, weighs just 3.2 oz and has three build in QD sockets with one on each side and a third on the bottom. This product, like the handguard, is constructed of 6061 aluminum and has a type 3 hard coat anodized finish as well as a lifetime warranty.

Not to be left out, we also looked at the bolt handle and saw room for improvement.

With a slightly longer than factory length and a knurled exterior finish our bolt handle (MI-PC9BH) will not slip from your fingers when used to charge or clear your rifle.

This handle is constructed of 4140 steel and is coated with a mag phosphate finish. This handle installs with the factory hardware.

These products, like everything we make, is putting Americans to work by being 100% made in the USA and is backed by our lifetime warranty.

Retail Pricing in USD:
MI-CRPC9 - $169.95
MI-PC9QDSP - $39.95
MI-PC9BH - $19.95


http://i1185.photobucket.com/albums/...psfi0bvnwa.png

http://i1185.photobucket.com/albums/...psgixqkwl4.png

http://i1185.photobucket.com/albums/...pscdmjufkb.png

http://i1185.photobucket.com/albums/...psqwnojeeb.png

More cool products from you guys. Keep up the good work. Makes the little ruger pretty cool.

I like that. Does the handguard replace the factory plastic handguard?

Quote:

---

Originally Posted by taekwondopreacher

I like that. Does the handguard replace the factory plastic handguard?

---

Yes one bolt to remove the factory unit and the reinstall with the supplied socket head. Literally a two minute install.
Thanks.
Troy
MI

Any idea what the factory handguard weighed? That seems like it gives good options at very little weight gain. The only reason I have not purchased the Ruger PC yet has been weight.

Quote:

---

Originally Posted by taekwondopreacher

Any idea what the factory handguard weighed? That seems like it gives good options at very little weight gain. The only reason I have not purchased the Ruger PC yet has been weight.

---

Factory Handguard weighs 8.1oz. Our unit weighs 10.9oz.

Troy
MI

Here are a couple more views:

https://i1185.photobucket.com/albums...psmdirvqe0.png

http://i1185.photobucket.com/albums/...ps5ihpsqtb.png

https://i1185.photobucket.com/albums...ps7vlmngr6.png

What’s the interior diameter of that handguard?

Quote:

---

Originally Posted by Achilles11B

What’s the interior diameter of that handguard?

---

The I.D is 1.300.
The O.D of the M LOK areas is 1.500

Troy
MI

That handguard looks awesome. Is there a release date for the new products yet?

Now I’m wondering if that QD butt spacer would work on a GSR...

Quote:

---

Originally Posted by Achilles11B

That handguard looks awesome. Is there a release date for the new products yet?

---

4 weeks on these three products.
Thanks
Troy
MI

Any plans on different lengths being offered on the handguard?

Quote:

---

Originally Posted by Achilles11B

Any plans on different lengths being offered on the handguard?

---

We are in the early stages of these parts. If this gun evolves we will evolve and support new products if the sales are there .

Troy
MI

Pre order on these parts is April 22
Full release and shipping starts April 25

thanks
Troy
MI

Quote:

---

Originally Posted by Gunnar da Wolf

Now I’m wondering if that QD butt spacer would work on a GSR...

---

It should, on another forum some said that the extensions are identical between the PSS and GSR.

You guys need to advertise the QD extension for the Ruger GSR also. You would pick up a few more sales.

Thank you for the suggestion .

Troy
MI

This AR pistol and Pistol caliber forum?...…...just sayin...…...

Quote:

---

Originally Posted by 6mmAR15

This AR pistol and Pistol caliber forum?...…...just sayin...…...

---

Seems like a great place to let pistol caliber shooters know about products that a site sponsor makes...... Just answering.....

A lot of time and thought went into this handguard.
We have incorporated three QD sling attachment points as well as a place to thread in a stud for your Uncle Mikes style sling.
Another feature we offer is a row of M-LOK slots along the top edge which allows for mount lights for night/ indoor shooting or hunting.
It was our goal to make a handguard that was as functional as possible, as well as offer something aesthetically pleasing.

https://oi1185.photobucket.com/album...psgmvynvcm.png

https://oi1185.photobucket.com/album...psumaa2j2u.png

Looks nice! I’m debating which PCC to get and it’s good to see more stuff coming out for the Ruger.

Now taking pre orders to ship on the 25th!

https://www.midwestindustriesinc.com/category-s/570.htm

Mine came today, installed with no problems. Looking forward to hitting the range.



Attachment 57186

Olive green handguards are now shipping!

https://www.midwestindustriesinc.com...-crpc9-odg.htm

https://i1185.photobucket.com/albums...psobomzfs9.png

Our side mount for Aimpoint micro sights and clones is now shipping!

https://www.midwestindustriesinc.com.../mi-pc9t1m.htm

https://oi1185.photobucket.com/album...psfljgnllj.png

With the multitude of requests from you, our customers, for a longer M-LOK handguard for the Ruger PC Carbine we took our existing product and extended it by two inches.

The now available X model of our handguard for the PC Carbine is still a free float design. The X model has all the great mounting options of our standard version with M-LOK slots on eight sides as well as three QD sockets built in for your sling.

These handguards are in stock and shipping.
Available at the link below.

https://www.ar15.com/media/mediaFile...ll-1166715.jpg

https://www.midwestindustriesinc.com.../mi-crpc9x.htm

Nice. Turns a mundane carbine into something tacticool.