11.5 Carbine Length Barrel for Suppressor 95%+

Printable View

Show 40 post(s) from this thread on one page

10-16-19, 21:11
MistWolf

Quote:

Originally Posted by John W

...Be prepared to start playing with buffers/spring combos...

No need go play with buffers & springs at all. Get the gas right and and the upper will run fine with H2, A5H2 or rifle buffer. Use the appropriate quality action spring and press on.
10-16-19, 21:21
6933

G&R has Colt 11.5" barrels(w/FSB) right now.

I run Colt 11.5's(6933's) suppressed and love them.

11.5 is still short with can attached. Would I do it again? In a heartbeat. Favorite SBR's. Excluding HK 51.
10-16-19, 21:36
nightchief

Another +1 for Sionics RGP barrel. Been running one for two years now with an SF suppressor. I had some teething issues early that I wrote about in another thread but the issue was not the barrel, but the upper receiver. Folks at Sionics are really good to deal with too.
10-16-19, 22:09
slowrx

I have run BCM 11.5, BA Hanson 11.3, Triarc 11.5 and Colt 11.5 HRT and all of them have been supressed 95% of the time or more. They have all functioned great with and without the can. I think of those the BCM had the largest gas port. I wouldn't hesitate to buy any of them again.
10-17-19, 11:39
Zane1844

Quote:

Originally Posted by Clint

For dedicated suppressed use, you'll want a very small port.

We have several great solutions for running suppressed.

Our BRT OPTIMUM CQB-S is setup for mixed or dedicated suppressed use with a very small gas port and is in stock now.

This runs beautifully with a low pressure suppressor and light buffer.

Our BRT OPTIMUM SB has an extended carbine gas system for 100% dedicated suppressed use and should be available in a couple weeks.

The other option is a standard barrel with our BRT MicroTUNE Gas Block using a suppressor sized port.

I can't wait to buy your 11.5" SB barrel...just hard to ditch my MK18.

OP, I had a BCM 11.5 and as a lefty, it was too gassy suppressed. I'm using a MK18 now with the .070" gas port and it's an improvement but still a gassy.

Overall, I think Sionics ERGP or the BRT barrels will be the most comfortable to shoot.
10-17-19, 12:13
Pappabear

Quote:

Originally Posted by Eurodriver

Sionics.

You’re going to get a bunch of ill informed replies that say otherwise, but the answer is Sionics RGP.

This or if you run the can 100% the Extreme RGP is just dandy

PB
10-17-19, 13:03
markm

The ERGP sionics barrel is sweet. I'd be leaning towards that unless great function unsupressed is manditory.

I run the RGP with no can 100% of the time because that's what the port is SUPPOSED to be in the friggin first place, Mama.
10-17-19, 14:04
everready73

Quote:

Originally Posted by markm

The ERGP sionics barrel is sweet. I'd be leaning towards that unless great function unsupressed is manditory.

I run the RGP with no can 100% of the time because that's what the port is SUPPOSED to be in the friggin first place, Mama.

Sionics RGP is .070 i believe and if you cant wait for the lead time the FBI barrel is spec'd the same. Just do not buy from Unlimited Arms as the version they have with shaved FSB has a larger ,073 or so gas port

SOLGW port is .071 which is close to the Sionics as well

Sionics ERGP is closer to .063 i believe and that would proably be optimal for a can only
10-17-19, 14:10
PrivateCitizen

Looks like its time to get on that backorder list at Sionics.

Thanks all.
10-17-19, 14:35
markm

Quote:

Originally Posted by everready73

Sionics ERGP is closer to .063 i believe and that would proably be optimal for a can only

Yep. With Pappabears ERGP, it would run full power 5.56 ammo, but not lock back with the can removed.

Show 40 post(s) from this thread on one page