M4 stock adapter for Benelli M3
Frustrated by the lack of commercially available options, a buddy of mine whipped this up in his garage machine shop. He posted these pics to a local gun board with the following comments, and I thought some of you might like to see them:
_________________________
This is the second version I've built, the first one was just to get a feel for the overall fit to the shotgun and make sure everything I was designing was going to fit properly so it was not very refine. The second version as you can see it very nicely shaped and smooth. I modified a MIAD grip to fit the adapter and also machined the adapter to accept 2 ACS QD sockets. This version turned out really nice. I used a VLTOR buffer tube and of course a CTR stock, and from the pictures you can see how much overall length it takes off of the original stock. The custom latch plate the keeps the buffer tube from rotating was laser cut by Jon at NYFBFAB and is on the boards. He did good work, the price was good and the turn around was fast.
I'm thinking of making one more version with a possible 5 degree tilt down of the buffer tube.
http://i278.photobucket.com/albums/k...Bennelli-1.jpg
http://i278.photobucket.com/albums/k...Bennelli-2.jpg
http://i278.photobucket.com/albums/k...Bennelli-3.jpg
http://i278.photobucket.com/albums/k...Bennelli-4.jpg
______________________________
He and I and another friend test-fired this setup last weekend:
http://i72.photobucket.com/albums/i1..._benelli_3.jpg
http://i72.photobucket.com/albums/i1...on_benelli.jpg
http://i72.photobucket.com/albums/i1...elli_smoke.jpg