Originally Posted by
turnburglar
upon unboxing and first inspection it appears that my charging handle may be slighty out of spec. Theres a bit of rub from the charging handle on the left side of the reciever right before it latches closed. I can either run it as is, and Im sure it will clearance itself out and leave a nasty mar, or I will just get a new charging handle. Probably the latter since I need to get some other parts anyways.
Also the inside of the reciever and buffer tube do not have the grey coating like my BCM, although the PSA reciever has the same forging mark as the BCM. The BCG appears fine and the gas tube is properly aligned. I can't tell if the gas block has thread locker unless I take the rail off, but I can tell there is a VERY small amount of grease on the barrel nut. I think they are boarding on the line of a little too conservative.
This is only a report on the quality of the upper, as I do not have the LPK put into a lower yet so I cant comment on that quality.
With the Bads out of the way:
This rail is dead SEXY. It looks like a knock off LVOA rail. I'll try and post pictures soon.