M-Lok Fore-end compatible with JP heat dissipator?

Printable View

06-28-18, 01:46
FromMyColdDeadHand

M-Lok Fore-end compatible with JP heat dissipator?

I have a JP upper that I'm pretty happy with. The blend of adjustable gas, BCG, heat dissipator and brake is really a killer set-up for gaming. It is about 10 years old. I was looking at a new one and I'm not thrilled with the old style tube on the JPs and the new one isn't that much better. Looking for an easier and faster way to config the forend with stops and bipods and such. I'd like to go with an M-Lok, two things:

-I guess all M-Lok slots need a flat surface, so you'd never have a round tube, always some kind of 'stop-sign' extrusion?
- Are there any forends that have an ID of greater than 1.375? How would the flat sides measure into it?

I know the style is to go thinner with narrow diameter tubes.

1.375 is the OD of the heat dissipator for .75 and .65 barrels.
06-28-18, 06:19
nightchief

The ALG Defensne MLOK hand guards are roundish, definitely more round than octagonal. I have a MLOK foregrip on mine that locks up tight. ALG is a little wider in diameter than a BCM or Sionics.

NC
06-28-18, 06:32
MegademiC

KAC urx4 ID is 1.53”-1.55”
06-28-18, 10:07
FromMyColdDeadHand

Thanks for the responses. I had been using Brownells trying to parse through all the options, and they are hit or miss on IDs.

Quote:

Originally Posted by MegademiC

KAC urx4 ID is 1.53”-1.55”

That is a nice looking rail. Nothing like a JP-Knights hybrid to peg the cost meter!

Quote:

Originally Posted by nightchief

The ALG Defensne MLOK hand guards are roundish, definitely more round than octagonal. I have a MLOK foregrip on mine that locks up tight. ALG is a little wider in diameter than a BCM or Sionics.

NC

Thanks. I contacted them and they said it is 1.46, which I guess would work, as long as the rail and the barrel are perfectly aligned. I like the price point better. The V2 is pretty much what I was looking for.

Is there a relationship between ALG and Geissele? Sort of like LMT and Knights?
06-28-18, 11:24
MegademiC

Quote:

Originally Posted by FromMyColdDeadHand

Thanks for the responses. I had been using Brownells trying to parse through all the options, and they are hit or miss on IDs.

That is a nice looking rail. Nothing like a JP-Knights hybrid to peg the cost meter!

Thanks. I contacted them and they said it is 1.46, which I guess would work, as long as the rail and the barrel are perfectly aligned. I like the price point better. The V2 is pretty much what I was looking for.

Is there a relationship between ALG and Geissele? Sort of like LMT and Knights?

ALG is run by the wife iirc.
06-28-18, 11:41
FromMyColdDeadHand

Quote:

Originally Posted by MegademiC

ALG is run by the wife iirc.

ALG stuff seems cheaper, simpler? That is not how things would go if my wife ran anything.

ETA:

I found the Midwest "Suppressor Ready" line that that is 1.75 ID. Are there other manufacturers of "suppressor ready" rails?

https://www.midwestindustriesinc.com...-sp15m-blk.htm
06-28-18, 19:18
IndustrialHalo

Suppressor ready I know Aero precision, some Seekins rails with the bar system; interchangeable barrel nut with either.
06-28-18, 21:36
Tx_Aggie

Quote:

Originally Posted by IndustrialHalo

Suppressor ready I know Aero precision, some Seekins rails with the bar system; interchangeable barrel nut with either.

x2 on Aero and Seekins. Pretty much any handguard that uses the BAR barrel nut should work. That includes the Aero Quantum and Enhanced, Seekins MCSR, Ergo M lok Modular rail, etc. The YHM series of rails and anything that is designed to work with their barrel nut system should also work. I think YHM is selling an M lok rail now.

The Troy Industries standard M lok handguards (both the aluminum and carbon fiber) are probably large enough to work as well, as are the Midwest Industries Suppressor handguard, and the F1 Firearms P7M. .

Faxon has a carbon fiber M lok hanguard that has a 1.5 ID, I think.