The DD FSB is only going to be available on our v1, v2, and v3 uppers and complete rifles. It will not be sold commercialy.
Printable View
Just curious as how the one piece rail is installed with the FSB. I s the FSB pinned? Rail looks good. Will ther be Calif version with a BB?
Thanks
Installation of the new DDM4 Rail 12.0 FSP is very similar to the installation of our AR15 Lite Rail 12.0 FSP. Once the Bolt-Up Plate and barrel nut are installed, you have to drop the FSB into the pocket of the rail sytsem and then install the gas tube through the rear of the rail system. Then you slide the rail system and FSB over the barrel all at the same time. At this poing you would install the FSB taper pins then bolt up the rail system. Last, you would install the gas tube roll pin and flash hider and you're finished.
California Compliant Rifles in these new configurations are certainly going to be available. In fact, there are probably some already on the way to dealers in CA.
Awesome! Thanks for that info. I'm a lazzy ass so I like buying off the rack.