Battle Arms Development's new BAD-EPS (Enhanced Pin Set)
Hi guys, just wanted to share a new product recently released from Battle Arms Development for the AR-15 patterned rifle. While some have been tracking these pins for some time now as evidenced in this thread from BAD's industry sub forum.....https://www.m4carbine.net/showthread.php?t=136218, I figured a less obscure thread would be appropriate now for them since they're now widely available for purchase.
So without further ado, let's take a look at these new pins from BAD...
http://www.shop.battlearmsdevelopmen...media/EPS6.jpg
Battle Arms Development Enhanced Pins set consists of the ETP (Enhanced takedown pin) and EPP (Enhanced Pivot Pin). Precison Swiss CNC machined from round stock steel bars, the ETP & EPP are case hardened and finished in milspec black maganese phosphate.
The EPS features the following improvements and features:
* AR15 Compatible - fits all AR15 lower receivers with mil-spec .250" diameter front pivot and rear takedown pin holes.
* Patent Pending Pivot Pin & Takedown Pin Head Designs - greatly improved gripping surface and pull strength without the use of oversize heads.
* Low Profile Pin Heads - low drag and never in the way. Lower profile than mil-spec pin heads.
* Ambidextrous Safety Compatible - the ETP (Enhanced Takedown Pin) head design does not obstruct the use of the right side ambi safety selector lever.
* Extended Pin Tips (+0.030" over milspec) - added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver, without undue protrusion.
* Bullet Tip Guide - cone shaped recess at both pin tips prevent accidental bullet or tool slip and reduced the chance of scratching/damaging of the receiver.
* Patent Pending EZ Guide Channel & Magnetic Assist Install - Easy, hassle free magnet assisted installation of the EPP (Enhanced Pivot Pin). No more lost detents and springs.
Each BAD-EPS comes with (1) ETP, (1) EPP, (2) KNS hardened stainless steel detents, (2) 17-7 nickel plated stainless steel pin springs, and (1) high-strength neodymium magnet for hassle free magnet assisted installation of the Enhanced Pivot Pin.
Proudly designed and manufactured in the U.S.A.
Battle Arms Development's new BAD-EPS (Enhanced Pin Set)
I want a set! Need a tester?