I need a sling mount for my Magpul MS3 sling. If I buy a Troy OEM sling plate will the QD from my magpul sling interface with the Troy sling plate or is the QD design different for each vendor?
Thanks in advance.
Printable View
I need a sling mount for my Magpul MS3 sling. If I buy a Troy OEM sling plate will the QD from my magpul sling interface with the Troy sling plate or is the QD design different for each vendor?
Thanks in advance.
The ones i have vary in the style of the release button, but the qd itself is/are alike. One is troy the other DD
yes, as long as you buy both the swivel and the socket from quality makers.
Ok. Thanks guys
Sort of adding to the questions on this thread. I have a BCM KMR Rail that I am trying to use the IWC Keymod low profile sling mount with QD. However, this setup is not working with my sling. The QD push button sling seems to have a nose or protrusion that is too long and will hit the back of the KMR Rail when I try to mount it. With the IWC taken off, I can mount the sling in the IWC mount, but then it won't go on the rail. Here is a picture.
http://i62.photobucket.com/albums/h1...psc3986901.png
Does anyone have any suggestions how to make this work? Or would I have to either get a different sling attachment or different sling? Thanks.
You have not mounted it correctly. The iwc mount works.
Read here:
Page 5.
https://www.m4carbine.net/showthread...-Options/page6
I just looked at the thread and you're right. I must be mounting it incorrectly as the QD socket hole should wind up directly in front of the Keymod hole. I'll try it tonight. Thanks!
It worked! I fixed the problem. I wasn't installing the IWC mount correctly. Thanks!
No prob man. I as well as another member had the same issue.
Are all of these OEM parts because it seems every company has there own branded ones? And if purchased from the usual mentioned companies, BCM, DD, Noveske, etc are they good to go?