Scope too tall?

Quote:

---

Originally Posted by ColtSeavers

...it will be too high compared to typical ballistics based off of a(n above) bore height of 1.5".

---

Just a point of clarification... for a 1.5" scope the typical above bore height is closer to 2.6":

From top of rail to center of bore 1.092"

Height of scope = 1.5"

Total = 2.592"

Quote:

---

Originally Posted by n517rv

Just a point of clarification... for a 1.5" scope the typical above bore height is closer to 2.6":

From top of rail to center of bore 1.092"

Height of scope = 1.5"

Total = 2.592"

---

Thank you for the catch/clarification and apologies for missing that.

kind of pointless, if you want QD, get a QD.

You are just adding the possibility of recoil shift in two places instead of one.

Point taken; the fact that could work is one thing but it's far from Ideal.
Thanks guys for all the comments. The Aeroprecission mount is solid
And very light. 3 screws is not a biggie to swap optics so I might just use that and if I find myself switching often then I would add a QD mount.
M4 community always helping silly ones like myself come to senses lol

Quote:

---

Originally Posted by Digital_Damage

kind of pointless, if you want QD, get a QD.

You are just adding the possibility of recoil shift in two places instead of one.

---

Quote:

---

Originally Posted by Leaveammoforme

Step 1: Clear the weapon.

Step 2: Chunk the chicom riser.

Step 3: Put the H1 on a 45°... if you must.

Why not sell both optics and get a 1xWhatever with a lit reticle?

I personally would mount up the H1 only and call it a day.

---

^^Agreed

--Too tall.
--Too weird.
--Too awkward.

Unless your eyes are mounted in your forehead.

If you are going to use the scope, just mount it to the rail.

Quote:

---

Originally Posted by SteveL

If it were mine I would ditch the work-around and go with an actual QD scope mount.

---

^^^ QFT

You are all completely missing the obvious solution:

Buy another upper. :-)

Only half-joking...

I was doing that as well lmao!!!
What a sickness!!!!

Quote:

---

Originally Posted by Auto-X Fil

You are all completely missing the obvious solution:

Buy another upper. :-)

Only half-joking...

---

I bought an ADM. Better to do it well.
Thanks guys!!

Good choice.