Hey guys,
I want to rebarrel my 6721 with something lighter. I don't care about the M4 profile (pro or con) I just want something high quality and light. Any suggestions?
Further, where is the best place to get it done? How much? :D:D
Printable View
Hey guys,
I want to rebarrel my 6721 with something lighter. I don't care about the M4 profile (pro or con) I just want something high quality and light. Any suggestions?
Further, where is the best place to get it done? How much? :D:D
SKU Number: B-1474HL
http://cmmginc.secure-mall.com/shop/...233214&cat=66&
Give Grant a call and see if you can get on of those Noveske N4 tubes put on. Put a quality barrel on your Colt.
keep an eye out for a Colt 6520 barrel (2lb 0.3oz as shown + gas tube)
http://tinyurl.com/6z5olk
Found these at Numrich...
http://www.e-gunparts.com/DisplayAd....uperSKU=&MC=YJ
No flash hider, but Adco could prolly thread one... It's a 6530 barrel but I'm pretty sure that's about the same as a 6520 but without the flash hider.
With the threading and pinning a FSB assembly it's still probably cheaper than an all new colt barrel.
Shoot, if you really wanted get Adco to cut it to 14.7", pin an A2 and put on a FSB...
Then again, you could just send your existing barrel and have it recontoured.
http://www.adcofirearms.com/shopserv...p_.cfm?code=21
I've had several similar barrels reprofiled to various weights. I'd not think twice about doing a 6721. Keep the quality barrel and get the weight you want.
Second choice- Acquire AR6520 (Gov Carbine) barrel, or Noveske N4.
Go quality, man. There are a few dealers selling LMT and Noveske barrels. Or you may want to replace the whole upper with a LMT or BCM upper.
as for installing, buy a set of pin punches and a barrel nut wrench and do it yourself.
go here for the barrel that you need/want :
http://www.specializedarmament.com/c...Parts-4-0.html
or you can send it here: http://www.specializedarmament.com/c..._15-201-0.html
let us know how you done.