got a brand new 16 heavy barrel carbine-i staked castle nut-put in a new wolf buffer xp spring-h buffer-new bravocompany bcg,is their any thing else i need to do to make this a fighting rifle.
Printable View
got a brand new 16 heavy barrel carbine-i staked castle nut-put in a new wolf buffer xp spring-h buffer-new bravocompany bcg,is their any thing else i need to do to make this a fighting rifle.
Check the Gas key and make sure it is properly staked. Go out and put 500-1000 Rounds though it in one setting to make sure it is reliable. After that you are good to go.
strongly recommend a spring-loaded punch for key- i've never successfully staked one with a hammer and ______.
you might consider getting the chamber reamed, if you're boutaboutit.
There have been some reports of Bushies sometimes not being quite to spec in the chamber.
Ive never heard that before, mines fine and is definantly 5.56 though
what strongbow said
Credit were credit is due: BM chambers are usually okay. Others lead the pack in chamber dim problems.
Reaming a BM on arrival won't hurt anything, and is cheap insurance against a potential problem. In absence of a symptom, it's left to preference.
findly got to shoot the new bushie today,the chamber is fine,shoot 60 rds,of xm193. no problem,good shooting rifle,even the front sight base is strait,
anyone one had any problems with wolf,shoot 60 rds xm193--30 rds pmc,and 40 rds wolf,the wolf shoot good but i was having problems feeding until i shoot the 90 rds of the good ammo,then it started feeding right guess it needed to get wroke in.
thanks guys for the info.
Wolff XP buffer springs have been known to create issues in some systems, especially when lighter loads are used.