I do not have easy access to gun parts. what I have is a C buffer on a 14.5in barrel. I run a Full auto bolt. I can't get to an H buffer.
so I decided to build one.
I got a 1 piece stainless bar. length is exactly the same stack as 3 steel buffers with rubber in between. I drilled a hole in it's center from end to end. Hole diameter is 10.5mm got a 12mm tap and threaded the inside of the stainless bar. Lastly I filled it up with Lead. The thread will hold the lead in place with all the banging.
I end up with a 1 piece weight of the same overall length as the 3 steel weights. But the weight is that of an H1 weight buffer. so will this work as an H1 buffer?
It's hard to order just the buffer..

