-
Andy,
Here is what I would do.
1. Take the Enidine POS and toss it in the trash or sell it on eBay.it.
2. Get a standard carbine buffer and install it.
3. Check the gas rings by doing a gas ring check. With a clean BCG (fully assembled) extend the bolt out and place the bolt face on a flat surface. If the carrier closes down onto the bolt then the rings are bad and need to be replaced.
4. Check the bolt carrier key and make sure that it isn't dented or loose.
-
perfect
just ceck the rings now..
all is good
the rifle is ok now with the vltror buffer and sping in this vltor tube...
im still happy
thanks guys