What railed forearm is slimmest in side-to-side measurement?
Printable View
What railed forearm is slimmest in side-to-side measurement?
I believe that the Daniel Defense Omega and the Lite rails are most likely to be the slimest you'll find. Most other rails like YHM, MI and Troy will have more of a round profile. I am unsure of the KAC and Samson systems
If you are looking for a quad rail, probably the Daniel Defense Omega or Omega X . Spikes Tactical is also comming out with a slim version of their new quad rail , the Spike's rails will also have the bottom rail tucked up closer to the rail body than other rails. It also has the monolithic look of the Omega and Omega X .
DD lite, LMT MRP and LaRue are approx 2" across. KAC is a tad under 2.2".
According to Rob's chart the troy TRX extreme is the slimmest.
yeah but thats without the rail segments attached im sure. so once you attach those its wider than most. i think the omega still wins at least in the full quad rail category. personally i like the DD m4 rail but not the lack of a continuous top rail.
if there was a rail that had the raised lower section like the DD RIS II or the Larue rail and a continuous top rail with the width of the omega rail i would put it on all my rifles...
http://farm5.static.flickr.com/4003/...73b57017_o.gif
OK...another question.
I have a PRI carbon fiber forearm right now. If I want to remove it and install an Omega rail, am I able to do that without having to buy any parts other than the Omega rail? I bought the upper with the PRI forearm installed so I have no idea what goes into the installation of it (or the Omega rail, for that matter).
Any information would be appreciated.
If they made the Omega X 12.0 FSP rail bolt up the the upper receiver like the RIS II, that would be perfection. I don't trust set screws for nothin'!
I like the feel of the DDM49.0, targeting the Lite10 for my current project. For me the non-continuous top of the DDM4 rails is a non issue, just want to diversify a little.